How do I increase my sound using the Audio Mixer?

I needed to raise the volume of a clip I had in my Premiere Elements project. Somehow, I managed to do it. When I play the clip with the Audio Mixer open, I see the slider bar way at the top at a +3 which is great for the clip I have. I have another clip from the same event and I also need to raise the sound to a +3. I THOUGHT I had selected the clip, and then simply slid the bar up. I did this a few days ago. Now I am trying to raise the volume on another clip by sliding the bar up but it has no effect. I may have edited the start and end of the clip but I wouldn't think that would have any impact. I would think that any volume changes could be made to a trimmed clip. Anyone have any thoughts? Thanks.

Rick
Have you explored Normalizing the clips....Clip Menu/Audio Options/Audio Gain
Please see "Adjust the Input Level of Clips" in the following Adobe document
Adobe Premiere Elements Help | Mixing audio and adjusting volume
Are you working with Music Score Soundtracks?
Are you working with 5.1 channel audio?
Generalizing...you should be able to volume change an audio clip that has been trimmed.
ATR

Similar Messages

How do i get Stereo Sound using the KONA LHE?

Ok I have a sony HDV HVR-M15 deck, connected to the KONA for video and the audio connected to a mixing desk.
The KONA is also connected to the mixing desk via analog audio XLR to Jack.
At the moment everything i capture is mono one channel sound, and can only play through one speaker. Is there a way to capture in stereo??
At the moment I am getting the KONAs 8 channels of audio, 2 of which are identical and 6 of which are empy!!

check the pan pot on the desk (the yellow pot just above the solo/mute buttons and fader)
on the left channel input from the deck turn the pot anti-clockwise all the way to the left
on the right channel input from the deck turn the pot clockwise all the way to the right
regarding (unwanted?) the multichannel input, launch FCP and open the Log and Capture window
click the clip settings tab in the right hand pane
how many input channels do you have selected in the Audio section
below that popup you can define whether those channels are captured as stereo or mono pairs by toggling the link icon at left of each audio pair level indicators

Is the Audio Mixer Working?

Is the Audio Mixer Working?
I am following step by step in Steve Grisetti’s book to learn how to use the Audio Mixer on the Action Bar, in the Tools section.
As I read the information, when playing a video project (with audio), opening the Audio Mixer should
(1) allow volume adjustment, and
(2) reveal operating audio-level meters (which are like VU meters in old analogue equipment).
HOWEVER, I find that opening the Tools function immediately STOPS the video from playing, of course then also stopping anything related to the Audio Mixer.
So, how does one open/activate the Audio Mixer (or anything under the Tools function) while the video (including audio) is playing?
Thank you,
Howard
P.S. I'm editing this post to add the following:
In my continuing practice with this new-to-me program, I just discovered the "Adjustment" function of the upper menu bar. Similar to the operation of the Tools function, as soon as I click on the function, my playing video/audio project STOPS. I cannot edit the engage the volume adjustment while the project is running.
While it's generally unreasonable for such a beginner as myself to state that I know how this program is supposed to operate, I have read both in Steve's book and in this user forum that audio should be adjustable WHILE the project is running.

Yes, I located Adobe’s so-called "Help", but it seems to offer only thematic tutorials, not a traditional help function in the form of an Alphabetical Reference Index.
With the traditional Alphabetical Index, one need only provide a word or two -- such as "Snap To" or "Sharpen" -- and the Help function takes the user DIRECTLY to a definition or explanation of that particular function or concept, not unlike a very comprehensive Index at the back of a well-written manual.
I also own the FULL version of Photoshop CS5. The Help function has gradually moved to referencing Adobe’s Internet support, but there is still the traditional indexed "how to" and other help explanations, though they are more difficult to access than in the older versions of the program.
I am a new user who (1) is trying with considerable time and effort to learn PE-11 and (2) has purchased Steve’s book. However, because I have not found an Index-type source of help associated with PE-11, I have come this User Form far more often than would be necessary if Adobe had spent the time and money to include an Alphabetical Reference Index as part of the program, and not merely some general "how to" categories on their website.
If blame is to apply, it is on Adobe. I have no idea how any truly new user (defined as never before having used ANY video editing software) could get by without the two of you (Steve and Hunt) on this User Forum. I assume you are both paid consultants or contractors for Adobe, and I hope they’re paying each of you a Caterpillar-Front-Loader full of cash for what you do. But really, a lot of small items posted to this User Forum would be unnecessary if Adobe had incorporated with PE-11 the type of Alphabetical Reference Index suggested above.
My two cents.
Howard

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

How many users are registered for using the firefox sync server?

I'm working on a german wikipedia article about "Firefox Sync" and I need more information about the current usage and the historical development of this feature - number of registered users for the Sync Server at Mozilla - would be nice to have numbers for 2011, 2012, and current usage.
If possible, it would be also useful to know how many german speaking users are using the sync service.
Where are your Sync Servers located (US, Europe, Asia)?
What kind of systems and platforms are supported?
Is there a current documentation about the importance of the Firefox Sync Service, that I may reference?

thanks for your fast reply,
your URL to the page with the ideas of the new PiCL service shows in the remark about the usability of the "Firefox Sync" some hints about the usage of the current sync service "only 1% of our users have actually done so" - so I will use that as reference.
But it would be nicer to have some public message - for example: a mozilla blog entry - from the mozilla services group about the number of registered Sync Server User - and also about performance and reliabilty.
But if that is private information only, you can close this problem.

How can i detach the video from a clip so i can only use the audio when using imovie?

how can i detach the video from a clip so i can only use the audio when using imovie?

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

I have two Apple ID, how can I delete one and use the email address associates to the main one?

I have two Apple ID, how can I delete one and use the email address associates to the main one?

If you abandon one of the Apple IDs you will also basically be abandoning any content that you have acquired with that Apple ID. Content can only be updated and re-downloaded with the Apple ID that was used to buy it. Apple will not combine the content of Apple IDs and Apple will not transfer the content from one Apple ID to another Apple ID.

I created a signature ID and customized the signature; however, when I go to sign it only shows the name layout or graphic image? How do I go back to using the certificate?

Dear Forum
I was using Adobe version XI and the signature feature disappeared from the menu. Now I downloaded Acrobat Reader DC. Using the menu and instructions I created a signature ID and customized the signature; however, when I go to sign a document it only shows the name layout or graphic image? How do I go back to using the certificate that I created?
Any help would be greatly appreciated.
Regards
Carlos

Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content?

Apple recently replaced my broken iPhone 5 with a new one. I backed up all my stuff in iCloud. When I set up the new phone I apparently used a back up from an earlier date. Now I am missing some of my stuff. How do I go back and use the most current I cln

Apple recently replaced my broken iPhone 5 with a new one. I backed up the contents of my phone with iCloud.
When setting up my new phone I used an iCloud back up from an earlier date. Now I am missing some of my most recent stuff. How
Do I go back to use the proper iCloud back up to set up my new phone?

Tap settings> general> reset> erase all content and settings...then you'll have a chance to setuo your phone again

How do my wife and i use the same ipad?

How do my wife and i use the same ipad?

Nothing keeps you from handing it "back and forth" to share. I do this all the time on our couch with my Wife's iPad...
I think your quesiton revolves around having your own bookmarks and other data/info on the device.
The iPad is meant to be a "single user device"; there isn't a login/logout to differenciate one user from another. "The iPad isn't a computer".. ;-)
But, that being said, there are lots of ways to share the iPad/iOS environment. Many apps, such as Facebook, let you login and out.. so, while you share the same app, each of your login is different.
For bookmarks and notepad it is a little trickier.. You can each use a different browser (so all of your bookmarks are complerety seperate.)
In some cases I would sugest a couple get a $900 Macbook Air rather than an iPad if this sharing won't work. "Why can't I log in and out of and iPad?". I think that the fact that it doesn't gives the iPad many adantages over a computer.
If you have more specific questions pleaser ask away. Just like you share the kitchen table and many other things around your household, there are many ways to make this work! ;-)
Matt

How to get default values while using the transaction "BP"

Hi Group,
I have a query on how to get default values while using the transaction <b>BP</b>?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.

Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita.

How can i reformat my harddrive using the recovery disk stored in partition drive?

hi guys! i need help. i need to reformat my harddrive and i will do this for the first time. however, i was not ablt to make the recovery disk since i purchased the tx2 1275dx laptop last july 2009. what i have is a recovery disk stored in a partition harddrive. how can i reformat my cpmputer using the recovery disk in partition harddrive? my OS is windows vista. thank you...

Hi,
Shutdown the notebook. Tap away at f11 as you start to access Recovery Manager which you can then use to reinstall the Operating System.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I download Adobe Acrobat using the Agreement Number provided by my employer. Having difficulty connecting to Adobe Chat with Support option.

How do I download Adobe Acrobat using the Agreement Number provided by my employer? Having difficulty connecting to Adobe Chat with Support option.

Hi,
If you already have the serial number then I would request you to download the software from the below link and install it.
http://www.adobe.com/downloads/other-downloads.html
Regards,
Anand

If I have an iTunes gift card already redeemed on my account, than how do I buy a song using the money from the gift card instead of charging my credit card?

If I have an iTunes gift card already redeemed on my account, than how do I buy a song using the money from the gift card instead of charging my credit card?

Hi, in my case It did not use the balance first. I had balance but it used my credit card. Do I have to sign in Itunes first? Thanks.

Developing a 2 page form, username on the 1st page, password on 2nd how can i force FF to use the username from previous page when it asks to remember acct info?

I am developing a 2 page signup form, where the person enters their username on the 1st page and password on the 2nd.
When I test the form, FF asks to remember my password for the site - however it thinks the zipcode (field above the password) is the username on the account.
I have tried to put their username/email in a hidden field on the 2nd page, just above the password field - and that did not work.
How can i force FF to use the username from previous page when it asks to remember acct info?

This website is using autocomplete=off to prevent Firefox from saving and filling the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save names and passwords and other form data.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

How do I increase my sound using the Audio Mixer?

Similar Messages

Maybe you are looking for