How do I increase or decrease the quote level when editing a message?

When replying to a message, I often like to intersperse my responses with the relevant sections of the original message. When I try to do that in Thunderbird, it extends the quote line way above the quoted text. There appears to be no way to delete the "excess" section of the quote line without removing the quote line entirely.
Also, when there are two previous messages in a thread, there is only one quote line next to both. I cannot find any setting, nor any manual way of increasing the quote level of the original message.

this add-on might do it for you https://nic-nac-project.org/~kaosmos/quoteandcomposemanager-en.html

Similar Messages

How do i increase or decrease vaule of asset that was capitalized in prior

How do I increase or decrease the value of an asset that was capitalized in prior year (2011)? The prior year and current year depreciation also needs to be adjusted to reflect the change in asset value.
1)Assets were created in FY11 with an 11/15/2010 date
2)The assets were given incorrect costs.
3)I need to adjust the cost of several assets .The net amount of all cost adjustments will be 0$.
4)Some of the assets will be adjusted down to 0$. These need to be disposed of.
5)I tested few few assets in testing client using ABZON.
ABZON will not allow me to input the original acquisition date because it is in prior fiscal year. To test, I used a period 1 date (4/15/11). Using 4/15/11 will not adjust the prior year depreciation.
ABZON also does not deactivate the asset so after I processed the asset decrease using ABZON, I used ABAVN to dispose of the asset. This created an entry to the gain/loss account for the depreciation that was taken in FY11 (prior year).
For example: one asset with acquisition value: 2272.05 and depreciation posted in prior year (2011)is 53.97
Acquisition value 2272.05 has to be zero with other asset adjustment.
How can prior year depreciation (53.97) can be adjusted in the current fiscal year
Need your help on this.
Regards,
Lucky

HI,
My transaction type is not 7* series but it is 336.Please help me to get this done.
I mean it is settled from project and WBS element to Assets(144 assets) using CJ88,so i tried reversing it in CJ88 but it thrown me error message as Fiscal year is closed, I opened fiscal year for asset accouting for previous year.
i already did ABZON with value date 4/15/2011 for one asset among 144 assets and did asset retireemnt,so when try to reverse in CJ88 (value date :11/15/2010)its throwing me below message
retirement was already posted on the asset 00000xxxxxx 0000 on 20110415. Based on the value date 20101115 of the transaction, this transaction should have been included in the calculation of values for the retirement.
Reagrds,
Pandu
Edited by: luckypandu on Mar 9, 2012 3:46 AM

How do you increase or decrease decimal places

Does anyone know how to increase or decrease the number of decimal places in Numbers?

select the cell(s) then use the cell formatter to adjust the displayed number of digits. To open the formatter click the "Format" button in the top right corner.
Here is a number where the formatting is automatic:
Here is requested 2 significant digits:

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
Problem Event Name:             APPCRASH
Application Name:                  iTunes.exe
Application Version:               10.4.0.80
Application Timestamp:          4e262cfr
Fault Module Name:               QuickTime.qts
Fault Module Version:             7.70.80.34
Exception Code:                     c0000005
Exception Offset:                    00146b30
OS Version                                                            1033
Locale ID:
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information4:          0a9e372d3b4ad19135b953a78882e789
Any assistance I can get will be greatly appreciated.

Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

TS3899 The iOS7 seems to have removed the option to increase or decrease the number of emails stored in the inbox. Is there a work around?

In ios7 on the iPhone 5, the option in Mail, Contacts to increase or decrease the number of emails stored seems to have been removed.
Is there a way to increase the number if emails stored. In iOS I could set to 500 or 250 etc
Thanks

anilsudhakaran Thanks! This did the trick. I guess this was added with the update since this view used to be visible for me without the added step. Greatly appreciated

How do i increase capacity in my basic memory when i have unused memory in my time machine backup??

how do i increase capacity in my basic memory when i have unused memory in my time machine backup?

No. The Time Machine backup size will increase as you use the source machine. When it nears its volume's capacity limit Time Machine will automatically delete old backups according to its algorithm. Just let it work.

How do I get rid of the 3d effect when opening home screen? It gives me a headache.

How do I get rid of the 3d effect when opening home screen? It gives me a headache.

jimginakouri wrote:
It's more of a "zoom-in/zoom-out" every time you turn on home screen or open/close an app.
THAT you can't change. Silly of Apple not to provide a setting to back out the animation effects either as a whole or individually.

How do i add photos to the photo array when creating a book using iphoto 8.1.2? the book doesn't accept the albums and foldlers i drag and drop.

how do i add photos to the photo array when creating a book using iphoto 8.1.2? the book doesn't accept the albums and foldlers i drag and drop.

I'd suggest you ask this question in the iPhoto forums:
iPhoto
Posting here is unnecessarily limiting the people who'll see your question to those running iMacs.
Regards.

How do I get rid of the green hue when connecting to my TV?

how do I get rid of the green hue when connecting to my TV?

On the TV or iMac display and is Mirroring On or Off?
First check all of your cables, connectors and connections.
If it's a really strong green hue, then there is probably something wrong with the cabling or a connection.
If it is only slightly off hue, then go to: System Preferences > Displays > select the Color tab for whichever and try selecting a different Display Profile or setting a new Profile by selecting the Calibrate.... button.
also see > ColorSync for Mac OSX
Dennis

How do I reveal the cut points when editing Adobe Connect recording?

Since the roll-out of AC 9.1, when I edit the timeline of a recording I see the timeline of the position of my cursor ON TOP OF the timeline point of the cut points, therefore I can't see where I'm about to cut a recoring. How to see the cut points when editing the timeline?
Thanks,
--Kevin

Hi Kevin,
There is a know bug for the black marker overlapping the time-line with a black marker.
But we have a trick to help you do your editing effectively. Follow the steps mentioned below and you will be able to edit your recording with precision:
1. Pause the recording from where you want to start your editing.
2. Double Click on the LEFT marker. It will take both the markers to that point on the recording timeline.
3. Play the recording and pause the recording again at the point till where you want to edit the recording.
4. Double Click on the RIGHT marker. It will take the right marker to the end point of your to-be-recording.
5. Cut and Save.
Do let us know if this helps!
Thanks
Sameer Puri

Adobe Connect: how to display a picture in the WebCam pod when not sharing video

Adobe Connect: how to display a picture in the WebCam pod when not sharing video

The WebCam pod can pause a live video showing a static image. However, I believe that you are looking to use a Share pod, where you can upload a JPG or PNG image. Just place the share pod with the image where you would have the Camera pod.

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
It only cares about length i.e. max 2 hours including titles etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

How do we find out what the conflicts are when the metadata conflict warning appears?

How do we find out what the conflicts are when the metadata conflict warning appears?

LR doesn't provide any way to do that. If you are really curious, you could use the free Exiftool to capture the metadata in the file before and after you do Metadata > Save Metadata To File, and then compare the before and after.
Also note that many people have reported spurious notifications that a file's metadata has changed.

My daughter does not have an iPhone. I just got the IPhone4. When she receives messages from me they must be downloaded for her to read them. How do Imsend plain SMS messages to a non iPhone recipient?

My daughter does not have an iPhone. I just got the IPhone4S. When she receives messages from me they must be downloaded for her to read them. How do I send her plain SMS messages to a non iPhone recipient?

Well, it could have to do with her phone, however does she have any difficulty in receiving SMS from others? You may want to check how you have iMessage set up. Go to Settings>Messages>Receive at>Make sure your telephone number is listed there, then go to Caller ID, and make sure your phone number is the one with the checkmark by it. You may be sending messages with your email address as the header and if that is so, it may be requiring her to download it as data. See if that helps.

Problems reducing quote level when forwarding.

In Mail, under the Format menu, there is a selection "Quote Level". Under that there are selections for "Increase" and "Decrease". Early on with OS-X, decrease quote level worked sporadically (sometimes). Now it doesn't seem to work at all. I have my preferences set to not add a quote level when I forward, but I often get emails that are already quoted, many several levels deep. I'm talking about the vertical, colored bars at the left edge of the mail body window. (I can easily edit out the ">"s.) Sometimes I can copy the original mail and paste it over the forward to get rid of the quotes, but that often doesn't work either - the quote lines persist.
Any insights?
Perplexed.

I forwarded a message with a photo to my iphone and just got a question mark icon on the iphone. I've had this problem for years... back several generations of the mail program. How do we get apple to fix it? You should just be able to click forward and send and be confident that the attachment will display properly.

How do I increase or decrease the quote level when editing a message?

Similar Messages

Maybe you are looking for