How do I increase pixels?

How do I increase pixels in iPhoto?

you can not "increase" pixels in any way (PhotoShop will add pixels by interpolating new pixels between the existing ones but it does not increase photo quality) - you need to start with the pixels you need - everything you do after the initial photo is created will at best leave them alone and generally will reduce them and reduce quality
LN

Similar Messages

On 11in Macbook Air (10.10), how do I increase resolution of built-in display to 2560 by 1600 pixels?

On 11in Macbook Air (10.10), how do I increase resolution of built-in display to 2560 by 1600 pixels?
It can be accomplished when an external display is connected, so I expect it can be done without an external display.

You're getting full native resolution 1366 x 768 on your internal display, nothing more.
http://www.apple.com/macbook-air/specs.html
April 2014 11" MacBook Air Specs:
DISPLAY: 11.6-inch (diagonal) LED-backlit glossy widescreen display with support for millions of colors
Supported resolutions:
1366 by 768 (native), 1344 by 756, and 1280 by 720 pixels at 16:9 aspect ratio; 1152 by 720 and 1024 by 640 pixels at 16:10 aspect ratio; 1024 by 768 and 800 by 600 pixels at 4:3 aspect ratio
GRAPHICS & VIDEO SUPPORT:
Intel HD Graphics 5000
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors
http://www.everymac.com/systems/apple/macbook-air/specs/macbook-air-core-i7-1.7- 11-early-2014-specs.html

How can I increase the number of pixels in an image?

How can I increase the number of pixels in an image?

You can't.
The number of pixels in an image is decided by the camera that shoots the image
With an app like Photoshop you can interpolate - this will make a guess as to what a particular pixel may look like based on the ones around it. Results can vary wildly and Photoshop is expensive.
Regards
TD

After Firefox was updated, the font size on my screen was decreased for all applications. How can I increase the font size on my screen ??

After the update, the next screen showed all the letters in smaller font, with fewer pixels. All the screens are like that now and I found nothing in the Firefox help contents. This is a problem because I have vision difficulty. So, how can I increase the font size to what it was before? My screen is about 20 inches wide.
Also, any chance I can change all the font to Arial instead of Times New Roman?

Thanks -- that does help!

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

Unfortunately this will require some new programming by Adobe and there's no way to know when that will happen. In the meantime, the only option I think you have available to you is to change your resolution so that your monitor is using fewer pixels per inch.
Kinda blows the whole value of the newer monitor but I suppose you can switch back and forth from low res when you are working in Bridge to high res when you are working in PS.
Sorry, but for the time being, that's about it.
Best,
Gary

How can I increase resolution when burning a dvd with elements 11 premiere

How can I increase resolution when burning a dvd with elements 11 premiere
I am trying to generate a slide show DVD....the pictures on the TV are poor quality

Welcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt

Increasing pixel size of photos

I usually do photoshop work in an 800 x 600 pixel range. I tried to post a new picture on a website this morning and it came as a 171 x something , tiny little picture that could not be enlarged. How can I increase the size of my pictures? This is my first attempt using the Revel site. Eli

If I were to hazard a guess, the dpi of your 800px image is 300. Change it to 72 or 96 (Mac / PC). Leave resampling alone. Do it on a copy.
171 / 800 = 0.21375
0.21375 * 800 = 171
Mike

On my HP Touchsmart 310 PC how do I increase the inactivity time on the display?

On my HP Touchsmart 310 PC how do I increase the inactivity time on the display? Windows 7, 64-bit

Hi,
Please try Control panel > Power options > Change when the computer sleeps
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I use iwires to connect macbook to lg tv to watch netflix.How do I increase screen size on tv.I have tried display options on settings- not working

I use iwires to connect macbook to lg tv to watch netflix.How do you increase screen size on rv.I have tried display settings ,but not working

I would guess that the HDMI port on your mac is for output only - no input, and that's what your'e attempting to do when you attach the mac to your xbox. I looked in Mactracker and it lists the HDMI port as video output for both the 13" Retina MacBook Pro and the 15" Retina MacBook Pro (your post didn't say which one you have), so looks like that is the issue..

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

In mail, how do you increase font sizes in a reply. Cannot find things like "underline", "italic" etc either. Where are they? Entourage was easier!!

In mail, how do you increase font sizes in a reply. Cannot find things like "underline", "italic" etc either. Where are they? Entourage was easier!!

Preferences/Compsing/set to Rich Text (only then you can use bold etc).
Then Rightclick the toolbar in Mail, and clcik Customize the toolbar.
Put the icons (with or without text) that you want on your toolbar.

How can I increase the character limit of my text messages for Droid Maxx 4.4?

How can I increase the character limit of my text messages for Droid Maxx 4.4?

Send as a MMS.

How can I increase the font size of my email when I print it out, it is printing tiny

How can I increase the font size when I print out emails, it is printing tiny size?

In the Print dialog window, click the small reveal-button to the right of the printer's name -
The window will expand to show additional settings (similar to 'old' Page Setup) -
Be sure "Scale:" is set to 100% and the 'Keep apparent font size' item is checked.

How do I increase the font size in my email and maintain resolution.

Hi folks. Mr Newbie is seeking some help, I hope it is relatively straight forward, thanks
How do I increase the font size in my standard email and document views without losing resolution. Right now my font size in email, headers and text is less than that on my iPhone, it rather defeats the point of having a 27" screen if most of it is blank and I have to sit with my nose to the screen to read email. Thanks for your help, once you have stopped laughing. C

Two things you can do to easily aid with readability in Mail are as follows:
1) Increase the size of folders in the sidebar:
a) select "system preferences" from the Apple menu
b) select "general settings"
c) select small, medium or large under "sidebar icon size"
2) Increase the text in the main body of the email (both sent and received):
a) select "preferences" from the Mail menu
b) select "fonts and colors"
c) adjust font size for "message list font" and "message font". I have noticed this works properly while in classic mode, but in regular mode the message list font doesn't appear to change size.
Select classic mode by accessing Mail preferences and selecting the "viewing" tab.
Another shortcut is to right click on the toolbar, then select "customize toolbar", and then drag the "smaller / bigger" buttons onto the toolbar. Now you can decrease and increase font size as desired on the fly.

How can I increase the members in the chat groups?

The number of members in the cha groups is limited (3000)
How can I increase the members in the chat groups?

Elaborate.

How do I increase pixels?

Similar Messages

Maybe you are looking for