How do I increase Siri's volume?

How do I increase the volume of the Siri voice? Both male and female are almost too low to hear.

Hi,
Adding more memory may improve performance. That depends on what your projects look like and what sort of instruments you use.
A faster harddrive always helps improving things for audio files based actions (recording, playing back, using sampled instruments).
Are you familiar with the buffer settings? Bigger buffer means more latency but generally also less to no overloads. Keep I/O safety buffer disabled. That feature appears to benefit only low spec systems like mine.
Also you can disable the overload warning alltogether here:
If Logic stops unasked, it has an overload - I guess you know that now.
regards, Erik.
Message was edited by: Eriksimon

Similar Messages

How do you increase the voicemail volume on an iPhone 4s ( Verizon ). The phone volume is fine. It is when I retrieve voicemails. Even the speakerphone is faint. I have adjusted the side volume buttons and the volume control in settings.What am I missing?

How do I increase the voicemail volume on an iPhone 4s ( Verizon )? The phone volume is fine. I have adjusted both side volume buttons as well as the volume control in settings.

Number one - that person has given you false information...the Apple store genius bar supports all Apple products whether in or out of warranty. Checking is free, service on an out of warranty item is not free.
Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
Since you show that you have iOS 7.0.3 you might want to update that iOS to 7.0.4...plug the iPhone in so you are on a solid power source, then while on a WiFi go to Settings > General > Software Update and update to 7.0.4.

How can I increase the bluetooth volume?

I use a bluetooth device to send audio to my hearing aids. However, the iPad bluetooth signal is very low in the available audio dynamic range. Consequently, the volume level at my hearing aids is very low. I have adjusted the iPad volume control to maximum; but it's not enough.
Any suggestions? It is purely a software issue that Apple could adjust.

I can't say it is a software problem or not. Last week i purchased iPad2 from Stanford Shopping Center. Its really cool. No Bluetooth problems but the person who explains me the uses and fuctions of my iPad2 told me that you need iTunes software to use bluetooth perfectly. You can download iTunes directly from apple website but for download it will ask you your credit card number or iTune gift card $15.
Try Install iTunes and see if it helps you hope i should.
Thanks
Suhana
IT Manager
http://www.hearingaidsdelhi.com

How can I increase the speaker volume on my iphone

I have a 3G iphone. After 3 trouble-free days the speaker volume dropped drastically. I can barely hear what is being said. The unit still works well on a handsfree basis. A colleaugue had the same problem but the fault corrected itself. I have of course tried the toggle switches at the side of the phone. Any ideas?
jim

I went into the Apple store yesterday for the same issue. My speakerphone when being used in my car is barely audible. I can't even hear it if I hold it to my ear...but I'm in a convertible. When I'm in my SUV, it's not much better though. In fact, when placing a call, I can barely hearing it dialing. However, I tested all the Iphones on display in Apple and the speakerphones were very low too as was the dialing mode. They agreed that the speakerphone is low but it is the way it works. They suggested using an earpiece, which I hate. I am using a Motorokr T505 speaker box in my car for now. The speakerphone is okay if I"m in an absolutely quiet environment, which is just not the case when driving.

How do I increase voice volume on calls

Can anyone tell me how to increase the caller volume please?

If this is a new phone, make sure that you have removed the shipping plastic off the face of the phone.
To increase the volume, use the toggle switch on the side of the phone.

How do I increase the volume?

When i hear the song through headphones on Garage Band it is loud. But when i export to
ITunes and burn to a CD the volume is down too low. How can I increase it?

There is no problem. It is the fact that you need an extra step in music production to finalize a commercial song. THis step is called Mastering. It is basically applying multi-frequency compression, limiting and EQ to your mix, to raise the overall volume and to enhance the sound for any stereo configuration.
If you look and the master track in GarageBand you have EQ and Compression that you can use to get higher volumes (by reducing peaks), but the one GarageBand provides is not very good. I recommend using something like Ozone from Izotope or T-Rakcs.

How do I increase mic volume in new iPad

How do I increase mic volume in new iPad

There is no universal volume control in iOS 5 for the built in mic.
There are some external mics that can help.

My sound button will only lower volume how do I increase volume?

How do I increase the volume on my iPad? I can only decrease the sound using the button in the side of the ipad

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

HT4528 how do i increase volume for incoming calls and incoming text?. i have it to max

i have incoming and text messaging to the maximum volume. How can i increase it?

If while you are in Messages and set the volume, that is all you can get. You can try and see if Volume Limit is checked by going to Settings>Music and see if Volume Limit is off.
The only other thing I can recommend, is to create your own ringtone/text tone in a music editor and increase the volume in the file. You may also want to check your speaker area and see that it is clean and not blocked by any debris.

How can i increase the volume of 6plus when make phonecalls

How can I increase the volume when I make the phonecalls. I already tried the normal method like press the slide volume button but it doesn't work.Is there any other methods to solve the problem?

Did you try that while on a phone call? Also there are different volumes for different devices. If you have your earbuds in and set a volume that will change the volume for when your earbuds are in. If you have a bluetooth headset you can set a volume for that.

How i can increase the volume when i playing a video? dont showing the volume control in the player..

how i can increase the volume when i playing a video? dont showing the volume control in the video player..

Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.

How Can I Increase Volume of Song in Garageband?

I am a newbie to Garageband, and am trying to create a short promo with music and a voice over. I have done both tracks, and everything sounds fine. When I Share the promo to iTunes, the volume is too low. I have adjusted the Volume slider for the Master Track, and in Preferences, Advanced have checked Export projects at full loudness. No matter how I change the slider, the volume in iTunes comes out the same, and it is lower than I want it to be. I know I can go to Options in iTunes and raise the volume some, create a new mp3 version of it, etc., but not sure it will be enough. Is there something else I can do in Garageband so that when I share it to iTunes it is louder?

None of those seemed to make any difference. What I did discover, it that iTunes seems to muffle the sound of the promo while I am wearing headphones. When I took the headphones off, the volume seemed fine. Guess I should have tried that prior to posting the question, but did not realize that would happen.

How can I increase the storage capacity in Linux for installing Oracle 11g?

Hi all,
I've been searching in Internet information about how to increase the storage capacity of a Linux machine, so that it can help me with my problem without success. I tried to execute some command lines encountered in some tips in forums, but no one works.
I want to install an Oracle 11g database, which needs 4 GB minimal for the installation. I can not continue with the installation because of this problem.
I use a VMWare virtual machine, which I increased over its settings to 160 GB, but not its file systems or whatever in the machine.
I did this:
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 18G 15G 1.9G 89% /
/dev/sda1 190M 12M 169M 7% /boot
none 506M 0 506M 0% /dev/shm
/dev/hdc 699M 0 699M 100% /media/cdrom
As far I understand the bigger storage capacity is used by the file system /dev/sda3. But what about the rest, I mean the 140 GB?. I've already increased the storage capacity over the settings. How can I tell the machine "please use the remaining 140 GB for the installation of the Oracle DB and other needed installations?.
How can I increase here what?. Disk? File system? Volume Group? It can not be so difficult, can it?
There are no volume groups in the machine:
+[root@localhost /]# vgdisplay+
+No volume groups found+
Linux is too complicated. Unfortunately I have to do that in Linux :-(
Can someone help me? I sit here since long hours without finding a solution :-(

thanks for your answers.
To Dude:
You can address the problem in a number of different ways, but please post your version of Linux and provide more information about your current partitions
The Version of Linux is Linux Red Hat Enterprise 5.
Open Logical Volume Management from the System Administration menu.
Select your volume from the logical view, edit properties and then use the slider to set your volume size, or click "remaining" to extend your partition.
I've already opened the LVM from the System Administration menu, but there is no possibility to see the volume groups, because there is no one. There is no tabs like Volume Groups or something like that...
I would try the procedure described above your answer and write you again. I hope it works...I will write you back in a few minutes...

I want to increase the ringer volume but not the background volume (ie texts, emails, etc)

I want to increase the ringer volume but not the background volume (ie texts, emails, etc)

nigelb999 wrote:
Can anyone shed some light as to why it's not possible to adjust the ringer volume at the lock screen? Even though it's possible to adjust the volume during music playback and responses from Siri, etc.
Cannot answer that question. That is a decision made by Apple.
nigelb999 wrote:
If there was a profile app available in the app store that allowed me to automatically set different volume levels at different times of the day it would be great - particularly if the app didn't require me to jailbreak the phone.
There would not be an app like that, as they would not have access to the API. You can provide feedback to Apple if you would like to see this enhancement at http://www.apple.com/feedback and click on the appropriate link.

How does one increase the y-axis (amplitude) of the audio tracks?

How does one increase the y-axis (amplitude) of the audio tracks? My patient appears to have flatlined. I don't want to increase the gain, just the way the waveform looks on my monitor.

DrDtMM
The "Expert view" is a part of the new interface of Premiere Elements 11. In your version 10, you have the Timeline and the Sceneline view choices.
For now, I will assume that you are in the Timeline view where you utilize video and audio tracks and not a Filmstrip with scene slots.
I suspect that you may be after the following. Let us see.
To the right of where it shows the name "Audio 1" is a microphone icon. That represents the "Audio Display Style". There are two Audio Display Styles and you can select one or the other by toggling that microphone icon.
a. In one instance, you will see the wave form plus a horizontal orange line which is typically the Volume Rubberband for Volume adjust. This Display Style has a light green background.
and
b. In the other case, you will see a dark horizontal line, no wave form. That dark line is on a light green background.
I suspect you are at "b". Are you aware that "a" exists.
If you want a really blown up version of "a" to look at, you could separate the audio from the video, double click the audio to open the Preview Windows, and then scale up the Preview Window.
We will be watching for your follow up to see if we are getting in sync.
Thanks.
ATR

How do I increase Siri's volume?

Similar Messages

Maybe you are looking for