How do I increase the refresh rate provided by the Tag Engine?

Good Day,
Part of an application I've designed reads in various analog inputs from various sources (3 serial, a handful from the NI-6229 and some temps from the USB-9211A).  My Labview software (LV v7.1) is set to read in the values at 8 Hz (every 125ms).  Though when running, the Tag Engine online provides updated information about once a second (for the both the NI inputs and the serial inputs which have been setup to be read throug the Tag Engine aswell).  When going in the tag configurator, the groups that the channels are part of is set up with "Update Rate (secs)" = 0.20s by default.  I don't even get that.  Just a bout once/sec.
I've tried looking through MAX a bit but can't seem to find anything there myself.
Any ideas would be much appreciated.
Sean

Khalid,
Right at this time, I don't have the ability to throw an indicator into the code and run it to display as the stand is currently running clearing out a backlog that occurred over the last couple weeks.  That's why I had loaded the tag monitor while they run, and could see there that the values updated (and were timestamped) about every second.  I may try getting in there to accomplish what you suggest when they should be shutting down in about an hour and a half (if below doesn't work).  Does the tag monitor not update whenever there is a value change (and update the timestamp accordingly)?  That's what I understood from what I've read about it.
I think you may have pegged it though on how the server was configured.  I went into the server explorer and found a setting under LookoutOPCServer->Properties->Groups titled "Update Rate (msec)" which is currently set to 1000.  I'm going to try this out and will repost afterwards (hopefully when it works ).
Thank you much (again) for your valueable time,
Sean

Similar Messages

  • Is there a way to increase the refresh rate of the Worklist portlet?=10GR3

    BPM 6.x used to refresh the worklist a lot faster. Is there a setting (in Studio and in Server) for 10GR3 that can increase the refresh rate... Did not find it in workspace.properties file... Anywhere else to look for it?

    Chanege the size of the frame

  • Why is the refresh rate slower in lab mode? photoshop cc 2014

    hi
    why is the refresh rate slower in lab mode?
    for example i load an image , rgb , ad an adjustament layer -> curve and i start to play with curve -> the refresh is instantaneous (i mean the image become more dark or lighter instantaneous )
    but if i load an image -> conver in lab mode , the refresh rate is slower
    i tried cs6 too, same behavior
    ps how can i have an email to notify me that someone answer to this discussion?
    thanks

    hi
    there is nobody can check it?
    under windows 7 or 8
    thanks

  • How to speed Portal's refresh rate?

    Dear All,
    When I develop the portal application with some page modified,
    it seems that portal server has cached the old pages somewhere
    so that I can not see the new one immediately.
    Even I delete the __xx.java and __xx.class in WEB-INF directory of the
    application
    and clean up the temporary files browser uses locally.
    How can I speed the refresh rate?
    Clean some files somewhere else?
    Or is there any configuration turning?
    Alan.

    Alan,
    Making a few guesses:
    (a) Did your page change involve changing the page aggregation via EBCC?
    If so, did you sync the data to the WLP?
    (b) If not, check the following session-parameter in weblogic.xml:
              <jsp-param>
                   <param-name>pageCheckSeconds</param-name>
                   <param-value>5</param-value>
              </jsp-param>
    If you don't find this parameter, add this within the "jsp-descriptor"
    element and restart the server. Use an appropriate value (say 5 sec).
    I don't think browser cache has anything to do because, by default, WLP
    sets Cache-Control HTTP tag to not to cache content on the client side.
    Sincerely,
    Subbu
    Alan Liu wrote:
    Dear All,
    When I develop the portal application with some page modified,
    it seems that portal server has cached the old pages somewhere
    so that I can not see the new one immediately.
    Even I delete the __xx.java and __xx.class in WEB-INF directory of the
    application
    and clean up the temporary files browser uses locally.
    How can I speed the refresh rate?
    Clean some files somewhere else?
    Or is there any configuration turning?
    Alan.

  • Howto block the refresh rate ?

    Hello,
    I am having a display issue with my monitor. It doesn't displays specific refresh rates so that I cannot anything when starting my mini mac. I know it checks on boot what monitor is connected to have the best display.
    Actually I am using an old 15'' to force 60Hz display before plugin my IIyama monitor. It is annoying.
    Anyone knows how to prevent this problem? Is there a solution whitout buying another monitor? I juste want to fix the refresh rate and don't let it detect on bootup.
    Thanks in advance.

    AFAIK, there is no way to specifically stop Mac OS from detecting a display. That would be a handy feature in cases like yours.
    The best thing I can think to do is to make a VNC connection between your mini and another computer. In this way you should be able to make a useable resolution selection on the mini from the other computer. Once you do this, it will stay that way for good.

  • How Can I change my refresh rate to 75hz for on LCD using 91.47 drivers?

    HI,
    I use a 19" LCD and have always changed my refresh rate to 75hz to avoid ghosting in games like fifa 06 (60hz causes a nasty ghost on my 8ms panel).  I have been using the 81.98 drivers and could create an override to use 75.   The new driver will allow me to change the refresh rate to 75, but will not let me use it - I get the message "The custom resolution cannot be added".   I have coolbits2 installed.  Is there a registry setting that I can add to allow me to change the refresh rate?  If not, I'll just go back to the 81.98.  I am also using the DVI connection.
    Thank you,
    * This is on my Sli PC in my sig. *

    I know that on my particular LCD monitor, if I go above the recommended rates, then the screen will just go black and won't let me see anything.  Usually it displays a message telling me that it cannot display.  I think it especially does this with the DVI connection.
    You may have tried it allready, but just make sure that in your display properties you have unchecked the option to only display resolutions allowed by the monitor.
    You may also want to try and see if it will let you do it with a VGA connection instead of the DVI.
    Otherwise, you just may have to go back to the earlier driver.

  • The refresh rate for Mac mini 2014 at 3840x2160 using Thunderbolt

    Here: http://www.apple.com/mac-mini/specs/
    , it says that the refresh rate for resolution 3840x2160 for HDMI is 30 Hz.
    I'm wondering if it's the same using Thunderbolt, or more correctly DisplayPort.
    Thanks!

    MacMagnus wrote:
    Ok, thanks!
    If I could ask another question regarding this... is 30 Hz poor even for desktop work? Or movies.
    I believe the 30Hz is progressive and therefore for movies/video would normally look quite good. However for sports e.g. soccer which has a fast moving object i.e. the ball it would be less good. I have also seen comments suggesting that for computer use it is also less desirable particularly when you are scrolling as this entails affectively the entire screen image 'moving fast'.
    This is not based on personal use as I cannot afford a 4K screen yet myself. However for DVDs 24p is considered a to give a good image for movies and this I can confirm from personal experience so 30p should be even better. Obviously 60p is better still but for that you need either a Mac Pro, iMac or MacBook Pro Retina.
    It is probably going to depend on what you will be using it for. Perhaps you should consider spending a little more for a MacBook Pro Retina which can do 60 Hz.
    See Using 4K displays and Ultra HD TVs with Mac computers - Apple Support

  • I have a macbook pro 2009 and I want to find out what the refresh rate is, I need it to be 70 hz

    I need to find out what the refresh rate is. I went into system preferences and clicked on display, and saw refresh rate, but it said n/a. I need mine to be at least 70 hz, I can't find the answer anywhere.

    Where did you search?  Read the information from Kappy in - https://discussions.apple.com/thread/3298134?start=0&tstart=0 

  • I am creating an aperture book from my photos. How do I change the default map provided in the theme to one of my choice e.g. satellite view?

    I am creating an aperture book from my photos. How do I change the default map provided in the theme to one of my choice e.g. satellite view?

    Kyle,
    Thanks for your response. To be clear, the way I am importing the PDF is by going to New in LiveCycle, and selecting Import a PDF document, and selecting Create and Interactive Form with Fixed Pages.
    I cannot change the forms or pages, as they are created by our local Board. In otherwords, I have tryed used the flowable content, and upon import, not only are the fonts slightly different, but all the important artwork (trade-related) is gone, and is not in the exact positions it was in. The forms must meet the standards to which they were approved by the regional board, and there are state-mandated forms as well.
    What surprises me is that you say this method of Fixed Content isn't used much any more. I would think that a lot of people would have PDF files they would wish to make into fillable, interactive forms without needing to reconstruct the entire document. Perhaps a company that has always done things on paper, and now wishes to use those exact same forms on the computer, with no deviations to looks so they can be printed and match up perfectly.
    I thought about using Acrobat's internal form creation system. However, some of these forms have sophisticated options and the calculation scripts and systems within LiveCycle are very useful. Not to mention that it has a much larger scalability, should we chose to utilize it.
    Any other suggestions? I am so confused why Adobe would force medium-quality import of a PDF, but be so incredibly flexible about every other option in their program.

  • How do I increase ipad disk space allotted to the downloads of a particular app like Comics?

    How do I increase ipad disk space allotted to the downloads of a particular app like Comics?

    Support discussion for iPad
    iPad
    http://www.apple.com/support/ipad

  • How do reset my security questions if I have forgotten the answers I provided to the prior questions and it does not provide me with an option of a rescue email

    How can I reset my security questions if I have forgotten the answers I provided to the security questions and the system doesn't give me an option of a rescue email address though I have provided one when registering.

    Please see Kappy's User Tip here:
    https://discussions.apple.com/docs/DOC-4551

  • Setting the refresh rate on B1 dashboards

    Hello,
    is there any way to modify the refresh rate for the standard SAP B1 dashboards that come with PL12?
    any idea what the default refresh rate is?
    thanks, dan

    Hi Dan,
    Currently, there is no refresh rate setting for dashboard in PL12. You could request it in the SBO product development collaboration forum.
    I think it is because the report is for dashboard SAP B1. Dashboard is management report and is not daily operational report. No need to use refresh rate.  Probably, when run it in the excelcius, you can set it. I am not sure but you may check it
    JiMM

  • Apple discontinued its iWork Beta trial which allowed for the placement of documents on the web and provide others the ability to read, edit and download no matter their software.  Is there a replacement product?

    Apple discontinued its iWork Beta trial which allowed for the placement of documents on the web and provide others the ability to read, edit and download no matter their software.  Is there a replacement product?

    No.

  • The "Refresh Now" works but the "Scheduled Refresh" does not

    I am able to click Refresh now on my datasets and it refreshes fine. But I cannot schedule a refresh for any of my datasets. I get the following error: "You can't schedule refresh because this dataset contains data sources that do not yet support refresh.
    Learn more about the data sources we support for refresh."
    When I create the datasets, I create the power query in Excel 2013, upload it to OneDrive, and then upload it to Power Bi Preview. I don't understand why it works for the refresh now but not the scheduled refresh. Is there a fix for this?

    I am able to click Refresh now on my datasets and it refreshes fine. But I cannot schedule a refresh for any of my datasets. I get the following error: "You can't schedule refresh because this dataset contains data sources that do not yet support refresh.
    Learn more about the data sources we support for refresh."
    When I create the datasets, I create the power query in Excel 2013, upload it to OneDrive, and then upload it to Power Bi Preview. I don't understand why it works for the refresh now but not the scheduled refresh. Is there a fix for this?

  • Can Firefox provide an option to keep the refresh button next to the forward/back buttons?

    When I first installed FF4 the refresh button was buried on the righthand side of the URL window. There were a number of complaints about that location.
    Then the button got moved next to the forward/back buttons. This made me quite happy.
    Today, I find it's again buried in the previous position.
    Can I get it back to where it is more accessible?

    # Control-click on a toolbar and select Customize, this will open the customize toolbar window
    # With that window on display you can drag and drop the refresh button and place it where you want
    https://support.mozilla.com/kb/How+to+customize+the+toolbar

Maybe you are looking for

  • How do I turn off and on the icon size slider bar at the lower right status bar of a folder window.

    I have been trying for days to help a friend with a new iMac to turn on the icon size slider bar that on my iMac appears at the bottom of ever folder when it is open when in the "view" > "icon" mode.  I cannot find anything that discusses this slider

  • Byte JMS Message processing in BPM process

    Hello, I have a Global Automatic activity in my process which is listening a JMS Queue with Acknowledge Mode is set to "Auto Acknowledge". I am sending a XML on this JMS Queue as Byte Message. Please let me know how can I convert Byte XML back into t

  • ITunes won't sync music on new computer

    I recently bought a new laptop and copied my entire iTunes library onto it. I've also registered my device onto this computer. So I plug my iPhone in, click on my device on iTunes, then go to the music tab and click on Sync..and after syncing is comp

  • Problem in finding the following fields!

    compiler code compiler desc language code language desc runtime band code runtime band desc

  • Apple TV and 1080p

    I have a Apple TV (40 gig) on the way to my house. I know that the ATV can output at 1080p, but for what purpose? As far as I can tell the ATV can't do playback on any 1080p material, am I correct on this assumption? If so, does this tell us that dow