How do i increase the resolution on my screen in CC, my old CS6 was fine the new CC programme makes everything look like placed low-res files?
ow do i increase the resolution on my screen in CC, my old CS6 was fine the new CC programme makes everything look like placed low-res files?
yes doc set to high res, hard to get an example as screenshot is low-res anyway
Similar Messages
-
New User Question: Make iTunes look like the My Music folder on my PC
Hello
I newbie question. I just bought a 60g with Video.
I use Winamp for my PC, and use a Plug-in called "Dynamic Library". This allows me to see directly into my "My Music" folder while using Winamp.
Is there something similar to this that I have missed? Or, to put it another way...is there a way to have a folder created for each artist rather than a list of each song and each artist? This would enable me to scroll by artist then click that artist to see song lists (hopefully)
iTunes has a list of 5000 songs making it difficult to scroll efficiently. I really hope I don't have to manually create hundreds of playlists (one for each artist) so that I can find a song quickly.
As always, I apologize in advance if this is incredibly obvious and I have had a brain **** and missed it.
Thanks for any feedback.
sony viao Windows XP Pro 866mhz, P3, 140G, 512 RAM.Thanks Dave
I see that. Here's an example of what I'm trying to do. In my My Music folder, I had a folder called "one hit wonders," iTunes has divided this into each artist or its album. My original folder was a mix of several one hit wonder albums. Then I find out that you have to manually add album art to each artist. There was a appropriate album art in each folder. I am just surprised that iTunes couldn't automatically recognize this when it originally downloaded each folder.
I have just spent so much time organizing my "My Music" folder...untold hours. Now I'm basically looking to go through that all over again.
I wonder if I had selected "manually label each folder" or whatever the choice was when iTunes started if this would be different?
sony viao Windows XP Pro 866mhz, P3, 140G, 512 RAM. -
The resolution in my screen just went green-tinted and fuzzy, how do I fix it? I have a MacBook Pro
The resolution in my screen just went green-tinted and fuzzy, how do I fix it? I have a MacBook Pro
I did. Unfortunately, it did not fix the problem. Do you have any more possible solutions?
-
How do i change the resolution of my screen shots that i captured from my desktop?
How do i change the resolution of my screen shots that i captured from my desktop?
Thanks.Do you mean you want it saved with the resolution set to something other than 72 dpi when the capture is made, or do you mean you want your capture saved at a higher resolution than the captured area?
1) If the first, there are ways to change the default capture format .png to something else, such as .jpg, .tif and a few others, but as far as I know, the resolution will always be 72 dpi. You can use Preview to change the resolution of the captured image under Tools > Adjust Size. You will get this:
If your intention is to set the resolution for professional printing defaults, then change the resolution to 300. Turn off Resample image to prevent the image from actually having more pixels added. The resolution will simply be reset from 72 to 300 dpi without changing the actual number of pixels in the image. It will also print a lot smaller since the output device will now use 300 pixels per linear inch instead of 72.
Leave Resample image on if you need to maintain the dimensions. Be aware however that scaling the image (resampling) will add a lot more pixels to the image than are there to maintain size. Expect the image to get very soft and pixelated looking when adding 417% more data to the image than it currently has.
2) If you mean you want the OS to actually save the captured area as a high resolution image at size, that can't happen. A capture is a 1:1 grab of the display buffer. It can only capture what's there. So if you capture a 700 pixel x 500 pixel area, that's all the bigger it can be without scaling it afterwards. -
How to make it look like the actors are watching TV
Hi,
I am looking to add an effect in Adobe Premiere Pro CC to make it look like the actors are watching TV in the dark. Just a soft pulsating, bluish-white light that may vary throughout. Does anyone know how to do this? I've tried scouring the internet but haven't found much. I'm a beginner for sure, but trying to learn!
Thanks so much,
-AndyIn the effects panel type "light" in the search box. This will bring up all the lighting effects in Pr. Adjusr/Lighting or Stylize/Strobe might work for you. There are a lot of adjustments you can key in until you find what suits your needs.
-
How to make it look like the camera is following a zig zagging line
I have an animated video where a person clicks a button and an arrow appears coming out of the right side of the computer. I would like to make it look like the camera follows the arrow as it zooms along a zig zag path and eventually ends at another computer. Does anyone know of any good tutorials for this?
Thanks,
PaulThis is just a matter of keyframes for camera position and point of interest.You are probably not going to find a tutorial that exactly matches your project. Try this:
Open up 2 views, one active camera, one top view.
Set a position keyframe for the camera where you want the movement to start.
Drag the point of interest to point at your subject (animated arrow)
Using the top view and setting the CTI (current time indicator) to the end point of the camera move, move the camera's point of interest to the same position as the animated arrow
Still in the top view, move the camera to it's final position
Using the pen tool (keyboard shortcut g) add points to the camera position path and drag them into a zig zag shape using the top view
Selecting the Point of interest in the timeline, adjust the position of the point of interest to follow the arrow as it animates across the screen by moving the CTI and setting new positions.
Another thing you could do would be just to use a lookAt expression for point of interest. This would keep the camera pointed at the arrow.
Hope this helps. Animating a camera is one of the most basic skills an AE artist should have. It takes a bit of practice but it's not hard. -
If I am browsing on site such as Ebay or any shopping site and click on an item, when I return to the search page I am once again at the top of the page and have to search down for where I was in the list of items. This is not only on Ebay it is everywhere I search. Firefox goes back to the top of the page . It is annoying to have to figure out exactly where I was if I left the page and then returned. This is a hinderance when using Firefox. I have considered uninstalling it because of the inconvenience of 're-searching' after already doing a search. Firefox used to take me right back to where I was if I left a page, but that feature is not working now. I am not sure how to change this in the settings.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test. -
After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode. -
I'm trying to install OS 10.6 onto my Macbook, which currently has OS 10.5.8. I clicked install (on the DVD) and selected my Macintosh HD drive. I was given the message that that disk cannot be used because it does not have the GUID partition. In order to have a GUID partition, it suggested I go to disk utility and make the change. I couldn't see the partition tabs in the disk utility application. So how do I accomplish the GUID partition?
The problem is, reformatting the partition may require you erase the hard drive. Normally Intel Macs are preformatted GUID. The fact that yours is not, says someone who initially installed the system on your Mac did you a disservice. Regardless, you should backup your data before you upgrade. GUID formatted drives generally are not compatible with iBooks (pre-2006 consumer notebooks by Apple) Powerbooks, and PowerMacs, and iMac G5s. So if you indeed have machine with the MacBook name on the screen frame, it was not properly formatted from the beginning.
-
I found this article rather interesting. If I had to try and make a silk purse out of a sow's ear, I would read this one again.
RedShark News - How to make HD look like 4KI'd forgotten about RedShark in general ... thanks for the heads-up.
And the point about the "impression" being at times more important than the reality (especially if not well handled) is well taken. Working professional stills for many years now ... I've had large prints that even at close inspection looked much cleaner, sharper, and less noisy than other photog's made who had "larger" sensors ... but did their post not as righteously as I did. How you set up & shoot the image/s in the first place matters ... as does how you handle your post & output.
Craft matters ... -
"Actvation Required" appears on screen.Touch screen disabled.Resetting is not useful.Was in the hands of my 5yr old grandson.What to do?
Place the iPod in Recovery mode and connect to your computer and restore via iTunes.
For how to restore see:
iTunes: Backing up, updating, and restoring iOS software -
I HAVE THE IPAD 1 AND I NEED HELP UP DATING IT TO LOOK LIKE THE IPAD 2 OR 3 SO .... I WENT INTO THE SETTINGS AND I CLICKED ON SOFTWARE UP DATE AND IT SAYS IOS 5.1.1 YOUR SOFTWARE IS UP TO DATE SO I GO ON TO MY HOME SCREAN AND IT STILL LOOKS THE SAME SO COULD YOU TELL ME HOW I CAN MAKE IT LOOK LIKE THE IPAD 2 OR 3 ???? THANK YOU
The ipad 1 is not supported by apples latest software updates. The processor just cannot handle the newest ios. Im sure there are various third party apps in the app store to give you more of a look alike ios7 but the first generation ipad cannot be updated due to performance issues.
-
I used to be able to make FF look like IE with a button. I don't see the button anymore.
Some sites require IE e.g. Microsoft Update. I can't figure out how to make FF look like IE the way I used to do.
BillDid you have an add-on such as [https://addons.mozilla.org/en-US/firefox/addon/92382/ IE Tab 2 (FF 3.6+)] or [https://addons.mozilla.org/en-US/firefox/addon/10909/ IE Tab Plus (FF 3.6+)].
-
Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp
Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario
Maybe you are looking for
-
Hi All, I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error: Errors in the back-end database access module. OLE DB was unable to
-
My son bought an iPod touch 3g off of ebay. The seller left the apps and music on there and we'd like to delete some of the music. But when I try to transfer purchases it says: "Some of the purchased items on the iPod could not be transferred to your
-
Inserting a PCL string in java Document for paper source control
Got a printer issue here. I need to set the source printer tray from within the document using PCL because I am printing to a network printer and the driver that is being used always defaults the source tray to the printer default. I am inserting the
-
I try to delete my history on safari which it does but still random websites keep showing up
I try to delete my history on safari which it does but still random websites keep showing up when i type a letter "g" for google as if I had just visited that page...I believe it just started doing it since the latest update. How can I fix it?
-
[svn:cairngorm3:] 16766: fix build for Flex 3
Revision: 16766 Revision: 16766 Author: [email protected] Date: 2010-07-01 04:42:16 -0700 (Thu, 01 Jul 2010) Log Message: fix build for Flex 3 Modified Paths: cairngorm3/trunk/build-parent/pom.xml cairngorm3/trunk/libraries/lib-parent/p