How do I increase the text size when I click the T button in Adobe Reader

On some documents in Adobe Reader when I wish to enter text using the T button, I am given the option of the font and size of text. However, on other documents, a very small text size is used with no option to change it. How can I change the text size or bring up the option window?

Press Ctrl+E to open the properties bar, where you could set the font size.

Similar Messages

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
It only cares about length i.e. max 2 hours including titles etc.
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

A word document was emailed to me. I can open the document without a problem. Is there a way for me to type on the document.... to fill out the form? When I click the fields, the virtual keyboard does not appear.

A word document was emailed to me. I can open the document without a problem on my iPad 2. Is there a way for me to type on the document.... to fill out the form? When I click the fields, the virtual keyboard does not appear.

If you want to edit a word document then you will need an app on your iPad that supports word so that you can copy them to it via 'open in' e.g. Apple's Pages app or a third-party app such as Documents To Go or QuickOffice HD

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance.

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on. Please, What must I do so that when I click the Spacebar (i.e., "Play"), the image does indeed advance? Thanks!

This pertains to Adobe Premiere Pro CS6:
Thanks for your prompt reply. This is my first post and I appreciate your patience. I imported media into the Project Panel. From there, I placed a few clips into a sequence in the Timeline. In the Timeline, I clicked on a clip. I then double clicked in Program Panel, and could then see the clip. However, when I click on the space bar, (i.e., "Play") in the Program Panel, the image in that panel does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on a bit in the footage. (The audio plays normally, confirming that we are advancing in time. )
I want to be able to press the space bar in the Program Panel and to see the "motion picture" in the Program Panel.
Please, What must I do so that when I click the Spacebar (i.e., "Play") in the Program Panel, the image does indeed advance? Thanks!
Not sure I yet have the capabibility of providing a URL of the problem.
Thanks for your guidance,
David

When I sync my iphone it says that there is newer version of the software but when I click the 'update'button I am told that 'itunes' is the latest version?

when I sync my iphone it says that there is newer version of the software but when I click the 'update' button I am told that 'itunes' is the latest version? There seem to be a few apps that are not compatible with my phone and I am wondering if that is because it is not up to date or beacuse it is a 3gs?

Snow Leopard requirements here:
http://support.apple.com/kb/SP575
I recommend no less than 2GB's of RAM. There is no download for SL, you must purchase from Apple, $29 at any Apple store. Leopard is no longer sold by Apple. About the only place you can find a retail disk is eBay, however the prices are getting ridiculous.

IS there a way to fix the issue with text list boxes where they shift (empty space is smaller than the text size) when two text lsit boxes are side by side?

Currently I have a webpage I designed for a company where I have multiple text list boxes side by side for the purpose of displaying data in each one based on a category in the database. So a text list box for the primary key, name, serial number, etc. I have to use Firefox as it typically works best for printing and functionality for the page. The single issue we are having is that in Firefox if the field is null as far as text the text are shrinks meaning all the data in that list box shifts up and is no longer in line with its congruent data in the other text list boxes. In other browsers that's not a problem and everything stays lined up regardless of whether there's text in the box or not.
Unfortunately I cannot provide a link but if contacted I will provide screen shots.

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Why do I get the text notification when still in the text and someone responds?

When I am texting with someone and the text is still showing on the screen I get the text notification every time they respond.
I have my text tone set to tri-tone, reminder alerts to none and vibrate off.
It wasn't always like this and it's driving me nuts.
Thanks for any help you can give me.

Someone answered in another thread. They told me to turn the phone off and wait a minute or 2 before turning it back on and it worked! Just thought I would share in case anyone else was having this problem.

Tracks are panning to the right alone when I click the virtual keyboard

Hello,
This is a very weird problem I think. It started happening sometime ago and I really have no idea how to fix it: When I click the virtual midi keyboard multiple times, the track start panning to the right alone. Does anyone have an idea how to fix this?
Thank you a lot

Hi
You should find these in the User Home folder library (which is hidden by default in Lion):
1) In the Finder, use the Go menu whilst holding down the Option (Alt) key... the Library will appear in the 'Go' menu.
2) Navigate to (<user>):Library:Application Support:Logic:Project Templates
You should find the ones you are looking for in there
HTH
CCT

A new tab won't open since the latest upgrade when I click the + at the top?

new tabs open every other way fine, but nothing happens when I click the "+" in the tab row to open a new tab.

If something works in safe mode but not otherwise, it probably means that an extension is blocking it. Start disabling extensions until you find out which one is the problem.

After extracting the Beta 4, when I click the Icon on the desktop, it goes back to the download page of 3.16.

I had a pop up on opening firefox that I should upgrade to 3.16, so I did.
After extracting installing, when I click the firefox icon on the desktop, I get a download page to 3.16.
I uninstalled Firefox. Restarted the machine and downloaded the Beta4.
After it installed, when I click the firefox icon on the desktop, I get to the download page of 3.16.

First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

How to stop the Flex application when user clicks on Cancel button from JS-confirm message?

Hi All,
I use the next code when a user clicks on a link:
private function clickHandler():void
      ExternalInterface.call('confirm', 'Of course you want to go to the Adobe forums!');
      navigateToURL(new URLRequest('http://forums.adobe.com'), '_self');
This will show up the javascript confimation box. But when the cancel-button is clicked, the user goes straightly to http://forums.adobe.com...
How to stop Flex performing the next code when a user clicks on the Cancel button?
Or, how to catch which button is clicked by a user in Flex?
Thanks!

I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
Show the Alert like this:
// show an alert with a question and yes and no choices
Alert.show( "Would you like to go to the Adobe Forums?", "Question",
     Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
Then handle the response in the closeHandler() function:
protected function closeHandler( closeEvent:CloseEvent ):void
if( event.detail == Alert.YES )
     navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
else if( event.detail == Alert.NO )
     // they chose no
The following documentation on Alerts may be helpful:
http://www.flexafterdark.com/docs/ActionScript-Alert
Let me know if that helps...
Ben Edwards

I can't open a new tab up in the same window when I click the little + sign next to the first tab. How do I get that to work on FF4 for Windows Vista?

I have a Sony Vaio labtop with Windows Vista, just updated to the new Firefox and now when I go to add a tab in the same window, it won't allow a new one. I clicked the + button/tab thing a bunch of times and nothing happens. What can I do to fix this? I'm not very computer literate so step by step directions would help alot. Thanks for any help.

You're welcome

Can I keep the CC value when user click the REPLY TO button in outlook?

Hi all,
I have set the CC value when I send email out. But when user reply the received email, the CC value will be displayed in the TO field. If anyone knows how can I keep the CC value unchanged when user reply the received email?
Thanks very much.

It depends entirely on the mailer they're using, you have no control over it.

How to get the line information when double click the ALV line?

LOOP AT it_outr.
    AT END OF vornr.
      REFRESH it_out.
      CLEAR it_out.
      LOOP AT it_outt WHERE nplnr = it_outr-nplnr
                        AND vornr = it_outr-vornr.
        MOVE-CORRESPONDING it_outt TO it_out.
        APPEND it_out.
      ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = g_repid
      i_callback_pf_status_set = 'HANDLE_EVENT_PF_STATUS'
      i_callback_user_command = 'HANDLE_EVENT_USER_COMMAND'
      is_layout                = ls_layo
      it_fieldcat              = lt_fcat
      it_events                = lt_evts1
      is_print                 = ls_prnt
    TABLES
      t_outtab                 = it_out
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
    ENDAT.
When we double click a field, how do we get the line information with the field?
READ TABLE it_out INDEX rs_selfield-tabindex. is not worked, because the table it_out is changing.

hi
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                = SY-REPID
*   I_CALLBACK_PF_STATUS_SET          = ' '
     *I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'*
*    I_CALLBACK_TOP_OF_PAGE            = ''
*   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
*   I_STRUCTURE_NAME                  =
   I_BACKGROUND_ID                   = 'ALV_BACKGROUND'
*   I_GRID_TITLE                      =
*   I_GRID_SETTINGS                   =
     IS_LAYOUT                          = LAYOUT
     IT_FIELDCAT                        = RT_FIELDCAT
*   IT_EXCLUDING                      =
*   IT_SPECIAL_GROUPS                 =
*   IT_SORT                           =
*   IT_FILTER                         = 'X'
*   IS_SEL_HIDE                       =
     I_DEFAULT                         = 'X'
     I_SAVE                            = 'A'
     IS_VARIANT                        = G_VARIANT
     IT_EVENTS                         = XT_EVENT
*   IT_EVENT_EXIT                     =
*   IS_PRINT                          =
*   IS_REPREP_ID                      =
*   I_SCREEN_START_COLUMN             = 0
*   I_SCREEN_START_LINE               = 0
*   I_SCREEN_END_COLUMN               = 0
*   I_SCREEN_END_LINE                 = 0
*   I_HTML_HEIGHT_TOP                 = 0
*   I_HTML_HEIGHT_END                 = 0
*   IT_ALV_GRAPHICS                   =
*   IT_HYPERLINK                      =
*   IT_ADD_FIELDCAT                   =
*   IT_EXCEPT_QINFO                   =
*   IR_SALV_FULLSCREEN_ADAPTER        =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
    TABLES
      T_OUTTAB                          = IT_FINAL
   EXCEPTIONS
     PROGRAM_ERROR                     = 1
     OTHERS                            = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CASE U_UCOMM.
    WHEN '&IC1'.
      READ TABLE IT_FINAL INDEX US_SELFIELD-TABINDEX INTO WA_FINAL.
      CHECK SY-SUBRC EQ 0.
      CASE US_SELFIELD-FIELDNAME.
        WHEN 'VBELN'.
          SET PARAMETER ID: 'VF' FIELD WA_FINAL-VBELN.
          CALL TRANSACTION 'VF03' AND SKIP FIRST SCREEN.
      ENDCASE.
      ENDCASE.
regard,
nawa

How do I get rid of the notice that I need to update, when Firefox then tells me I have the latest version when I click the link to get the update?

This notice has been on the page under the Google box for the last few days. There is a link to click on to update. The next page says that I'm up to date but suggests downloading Android or offers a download of Firefox if I'd like one.

Thanks for the help. It's undoubtedly my error in not saying I'm a Mac user up front. I got there & chose return to default. Turns out that's where I have been all along. It's the Mozilla Firefox Start Page. But it includes this silly notice that I don't have the latest version of Firefox! Seems to me there's a bug (or whatever, I'm not real techy) in the basic design of the Firefox home page. Maybe it hasn't been updated for users of Lion?

How do I increase the text size when I click the T button in Adobe Reader

Similar Messages

Maybe you are looking for