How do I increase upload speed?

How can I increase my upload speed to match my download speed? Currently getting 15Mbps dowloan and only 1.9 Mbps upload. Road Runner says its an issues with the router and not their network. I've alread powered down the router and disconnected it from the modem. I've plugged everything back in and noticed an increase in upload speed, but not download speed.

Upload speeds are never the same as download speeds for home broadband. Road Runner (whatever that is) is incorrect.

Similar Messages

  • My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

    I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

    On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
    >My performance is very slow when I run graphs. How do I increase the
    >speed at which I can do other things while the data is being updated
    >and displayed on the graphs?
    >
    >I am doing an an aquisition and displaying the data on graphs. When I
    >run the program it is slow. I think because I have the number of
    >scans to read associated with my scan rate. It takes the number of
    >seconds I want to display on the chart times the scan rate and feeds
    >that into the number of samples to read at a time from the AI read.
    >The problem is that it stalls until the data points are aquired and
    >displayed so I cannot click or change values on the front panel until
    >the updates occur on the graph. What can I do to be a
    ble to help
    >this?
    It may also be your graphics card. LabVIEW can max the CPU and you
    screen may not be refreshing very fast.
    --Ray
    "There are very few problems that cannot be solved by
    orders ending with 'or die.' " -Alistair J.R Young

  • How can i increase download speed on my MacBook Pro?

    How can I increase download speed on my macBook Pro?

    Common strategies:
    * Use ethernet instead of wireless.
    * Get a better/upgraded ISP.
    * Get a better/upgraded router.
    * Get a newer mac.

  • How can I increase the speed of importing audio cds into my iTunes library?  On my old Dell PC cds imported at 30-35x, but my new iMac (using the Apple Superdrive) is trudging along at 8-10x.  Any suggestions?

    How can I increase the speed of importing audio cds into my iTunes library?  On my old Dell PC cds imported at 30-35x, but my new iMac (using the Apple Superdrive) is trudging along at 8-10x.  Any suggestions?

    Hi,
    Not sure you can do anything about this. I get vaiable import speeds - a lot depends on the actual disc. The Read Write spec is 24X but I rarely see speeds close to this.
    Jim

  • How can Airport increase wifi speed when I am lucky to get 5mbps out of my modem now

    How can Airport increase wifi speed when I am lucky to get 5mbps out of my modem now.
    Is the Airport a modem in its own right?

    The Internet connection speed that you obtain on your network will be limited by the plan that you have with your Internet Service Provider (ISP).
    No device on your network will be able to make that connection go any faster.
    If you need a faster Internet connection speed, you will need to speak to your ISP about a faster plan....at a higher price of course.
    The AirPort is capable of providing far higher speeds than your ISP can ever hope to provide.  Kind of like having a car that can go 400 miles an hour, but the speed limit is 40.

  • Is it possible to increase upload speeds?

    My upload speed is reported as being 0.31mbps by BT's own speed tester, and checking with speedtest.net gave a somewhat similar 0.34mbps today (though this moves around a lot between 0.05 and 0.25 normally).
    Is there a way of boosting this?  
    I've read about line speed capping, is this something that folks know how to verify?
    Here are my line stats.
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    3 days, 12:15:37
    Downstream:
    9.494 Mbps
    Upstream:
    440 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    8.0 dB / 6.5 dB
    Line attenuation (Down/Up):
    32.6 dB / 18.1 dB
    Output power (Down/Up):
    19.3 dBm / 12.6 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    54224 / 83
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    736967 / 31
    Error Seconds (Local/Remote):
    13540 / 184

    Are you connected to the test socket? With your attenuation and a good line i would expect a connection speed in region of 13mb. Your upstream speed may well increase to .8/1mb at the next reset
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How can you increase the speed with a slider

    I have been trying to work at this for about a week and a
    half. I browsed several communities but it seems that noone has an
    answer so I am not even sure if this is possible I am not a flash
    expert but what I am trying to do is as follows;
    I have a movie with several movie clips. I have an animation
    of a female walking, I also have a slider that when I move it to
    the right bags are added on to her. but what I am also trying to
    accomplish is to have her walk faster as the slider moves to the
    right.
    I tried several scripts but they seem not to work as I wan
    them to plus they start to cancel out the bag function.
    How could I make this happen if it is even possible. I want
    to use the slider to increase the speed of the lady walking. Slider
    and Lady are movie clips.
    thanks in advance

    At present I'm not aware of any way to achieve this exact effect in Muse (where the first screen of a web page is resized to fill the browser window and the rest of the page, as you scroll down, appears to be fixed height layout).

  • How do you increase the speed of an audiobook?

    I am trying to increase the speed of an audiobook but don't know how to do so on my MacBook Pro.  My computer is on OS X Yosemite.  Please let me know as soon as possible how to do this, as it is sort of urgent. 
    Thank you so much!

    I do not think this is a feature of iTunes.  I recall a post recently where somebody mentioned doing this with Garageband.

  • How can I increase the speed at which I write to a spreadsheet?

    We are trying to acquire data rapidly during a 1.5 second test. We are able to acquire the data at a variety of speeds, but are unable to write it to an Excel spreadsheet any faster than 10 Hz. Is there a way to speed the writing to a file or are we stuck with this rate?
    Thanks

    Hello,
    I noticed your post was in the DAQ group, but you didn�t mention which
    programming language you are using. This answer is tailored to
    LabVIEW, but if you are using something else, let me know. Since you
    are running such a short test, it might be easier to acquire all of
    your data first and then write it to a spreadsheet file.
    If this is not preferable, you could use lower-level file VIs. Using
    a VI such as the �Write To Spreadsheet File� within a while loop is
    inefficient since it opens and closes the file each time it writes a
    new value. One of the fastest ways to write to a file is to first
    open the file. Then in your while loop, perform your data acquisition
    and write to the file. Finally, close the file after your while loop
    completes. If thi
    s is what you are already doing, you could try
    writing to a binary file instead of an ASCII file.
    Try acquiring your data and then writing it to a file. Or try using
    lower-level file VIs to increase the speed of file writing. If this
    does not address your problem, please provide some additional
    information such as the VIs you are currently using to write to the
    file or post all or part of your VI.
    Grant M.
    National Instruments

  • How can I Increase import speed?

    How do I increase the import speed

    Just what do you mean?
    If you mean importing photos and videos from the iPod to iTunes via USB, unless yo have an old, slow computer it is limited by the iPod.

  • How can I increase the speed of my wifi connection on my iPhone 4?

    Hey everybody. Okay, so long story short, my wifi speed on my iPhone 4 (Verizon) is pretty slow. So slow that I almost never turn it on because of the sluggish download speeds. However, I definitely want to have it on.
    I use the speedtest app, an my wifi at home (router in the next room) is clicking at:
    141ms ping
    0.72Mbps Down
    0.41Mbps Up.
    I'm seeing people on these forums post results like 9Mbps down, 5 up, etc. and I'm envious. How can I improve mine?
    Thanks in advance.

    There's nothing that can be done on the iPhone to affect the speeds via Wi-Fi, the iPhone simply is not the issue.
    What speed is the Internet service provided by your ISP?
    Is the wireless router you are connected to an 802.11b? g? or n? router?
    Both of these factors dramatically affect performance.
    Go to any Wi-Fi hotspot, you'll see a difference in speed.

  • Airport Extreme runs slow on iMac desktop but twice as fast on MacBook Pro - how can I improve upload speed on iMac?

    I have already done a complete clean of the iMac, to no avail. Have read the recommendations for adjusting chaneels, etc and I've done that too. The iMac has clear line of sight and is 20 feet away distance from Airport Extreme. My MacBook Pro runs very fast at 68 download speed off this same airport unit even when on a different floor, near phones and typical interference, etc. the iMac runs only at about 20 at best. Any ideas for how to improve this? I would need specific step-by-steps since I am clearly not an expert.

    The Airport Extreme model number is A1301. I am unsure how to locate the Radio Mode setting.... can you advise?
    Ok you have a 3rd generation 802.11n AirPort Extreme Base Station (AEBSn) that is capable of providing a simultaneous dual-band Wi-Fi networks. By default, the Radio Mode is set to "Automatic." Which means that it will support 802.11b/g/n wireless clients on the 2.4 GHz band and 802.11a/n clients on the 5 GHz band.
    Your wife's iMac, on the other hand, only supports wireless as a 802.11b/g client. That means it is only capable of connecting with a maximum bandwidth (speed) of 54 Mbps.
    Any time a non-802.11n client connects to a 802.11n network, it basically "slows down" that network for other 802.11n clients like your MacBook Pro. The only option I see at this time to improve bandwidth for both your wife's and your Macs is to consider getting a wireless 802.11n USB adapter for the iMac. A number of vendors sell these. One of them is Other World Computing (OWC). They are inexpensive and should dramatically improve the bandwidth performance for her iMac.

  • How Do I Increase The Speed Of Sending Emails Using The Mail Service on my Mac Mini Server?

    Note: This is the first time I have set up a mail server.
    I have a Ruby on Rails application where I am currently sending approx. 240 individual emails with the potential of more being sent each week as more people add themselves to our mailing list.  I am sending them invidually in order to personalize the emails and to hopefully prevent my emails being falsely identified as spam.
    The GoDaddy email address I was using in my Rails application has a daily limit of sending 250 emails each day.  With our mailing list fastly approaching 250 I decided to set up an email address on my Mac Mini Server using Mountain Lion (OS X Server).  The email address was set up to be stored locally at the advice of Apple Enterprise Support.  This email address will not be used in an email program.  It will only be used in all my Rails applications.
    My emails send properly but take almost 10 seconds an email.  When I use the same software with GoDaddy's email address the emails take about eight minutes to send.  With the email address I created it takes about 41 minutes.  The difference seems to have to do with the sacl_check being done.  Here is an example of what I see for each email in mail.log.
    Mar 14 11:06:50 hostname.domain1.com postfix/qmgr[45322]: 4B2C5603D25: removed
    Mar 14 11:06:59 hostname.domain1.com postfix/smtpd[99464]: sacl_check: mbr_user_name_to_uuid([email protected]) failed: No such file or directory
    There is 9-10 seconds that elapses when the sacl_check.  If I subtract this difference the remaining time is almost the time that the GoDaddy email takes to send the same number of emails.
    The link below is a post about the sacl_check.  I was looking at the comments by powercore from Germany at the comments where settings in /etc/postfix/main.cf are discussed.
    https://discussions.apple.com/thread/3241121?start=0&tstart=0
    Will making these setting changes speed up the sending of the emails from my Mail Server or is there something else I can check?

    http://en.wikipedia.org/wiki/Intel_Quick_Sync_Video
    OS X [edit]
    Apple added Quick Sync support in OS X Mountain Lion for AirPlay Mirroring and QuickTime X.[9]

  • How can I increase the speed of LabView computing?

    Dear all,
    I have a problem which I didn`t thought to face.
    My problem is the folowing. I have Implemented some applications in Labview but with my great surprise the program is incredibly slow!
    One of these was just a simple try to produce sinusoidal signal. I simply made a While loop where the sine of the "i" iteration number was calculated and then
    sent to a NI- 6559 DAQ through an USB port and the DAQmx Assistant.
    Well this simple program runs at 300 Hz Maximum. A similar program in C can without problems reach 20000 Hz!
    Now I am asking if Labview is the wrong choice for more than 100 Hz applications and if it is not convenient to shift directly on C language.
    Namely I want to let you know that the apllications I need require a loop speed of at least 800Hz.
    Really I cannot understand why the system is so slow. It cannot be otherwise Labview should be unusable for the large part of the applications.
    Can you suggest me what I am doing wrong, or maximum speed reachable on a normal 3 Ghz Pentium, 1 Gb RAM?
    Best regards
    Principiant
    Solved!
    Go to Solution.

    Hi Principiant,
    I tried to reproduce your LV VI, which calculates the sine from the loop counter and get a cycle time of 0,125 microseconds, calculating the sine of every degree (0 .. 359). This means 45 us / cycle, which is 22222 Hz.
    So it is likely that the communication with Your USB- device is the bottleneck. Is this device capable of buffered output? This would be preferable, it puts a block of data (pattern) into a FIFO and the device sends it to the DAC on its own.
    greets, Dave
    Message Edited by daveTW on 01-23-2008 10:09 AM
    Greets, Dave
    Attachments:
    Example_FP.png ‏14 KB

  • HT1145 how can I increase the speed of wifi reception?

    I was told by the cable TV & Internet tech that I will need to have a WIFI "N" modem to get the most out of the 50 mbps broadband speed coming into the apartment.

    I still think you need N wireless to saturate a 50Mbps internet link..
    But to the OP test it..
    If you download a file via wireless from the Internet and 50Mbps on G wireless you are my hero forever..
    If you download a file via ethernet on an old Linksys eg WRT54G it will not do any better than G wireless.. they are simply not up to the WAN to LAN throughput.
    So test carefully.. a 50Mbps link should deliver 50Mbps under ideal conditions. usually an FTP source provided by the ISP. If you get poorer speed than that.. replace it with N wireless router.. with WAN to LAN throughput that is at least 300Mbps.

Maybe you are looking for