How do I increase volume significantly

I have video I recorded on VHS tape from tv, transferred it to DVD, and onto my iMac, into iMovie. I want to upload these to YouTube, but the volume is very low. I know how to double the volume, but would like to still make it much higher. I suppose I could double it within Inspector, duplicate the project, and go through the same process to double it again (assuming that works), but is there an easier way?

Another thing to try:
Use Share/Export Using QuickTime.
Select an audio only codec such as MP3 or AAC.
Open the resulting file in GarageBand. You can increase the volume, but you will also be amplifying the noise, so maybe GB can help with this.
Export from GB to iTunes..
You can then drag the audio track back into your project from the music browser.

Similar Messages

  • My sound button will only lower volume how do I increase volume?

    How do I increase the volume on my iPad?  I can only decrease the sound using the button in the side of the ipad

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • HT4528 how do i increase volume for incoming calls and incoming text?. i have it to max

    i have incoming and text messaging to the maximum volume. How can i increase it?

    If while you are in Messages and set the volume, that is all you can get. You can try and see if Volume Limit is checked by going to Settings>Music and see if Volume Limit is off.
    The only other thing I can recommend, is to create your own ringtone/text tone in a music editor and increase the volume in the file. You may also want to check your speaker area and see that it is clean and not blocked by any debris.

  • How can I increase volume when burning to CD  ???

    After I download i-Tunes to my Windows XP computer, I then burn to CD to play in my car. However, the volume of the CD songs is limited. I want louder playbanck. How can I burn songs wiuth "increased" audio volume?
    Dell Dimension   Windows XP  

    I have the same question. Have you heard from anyone on this subject yet. I am going to try burning without the "soundcheck" option to see if that helps, although I suspect that will put the volume in the car all over the map. My theory is that the program has no option other than to limit the volume of the louder recordings to match the volume of the quieter ones. We'll see

  • How Can I Increase Volume of Song in Garageband?

    I am a newbie to Garageband, and am trying to create a short promo with music and a voice over.  I have done both tracks, and everything sounds fine.  When I Share the promo to iTunes, the volume is too low.  I have adjusted the Volume slider for the Master Track, and in Preferences, Advanced have checked Export projects at full loudness.  No matter how I change the slider, the volume in iTunes comes out the same, and it is lower than I want it to be.  I know I can go to Options in iTunes and raise the volume some, create a new mp3 version of it, etc., but not sure it will be enough.  Is there something else I can do in Garageband so that when I share it to iTunes it is louder?

    None of those seemed to make any difference.   What I did discover, it that iTunes seems to muffle the sound of the promo while I am wearing headphones.  When I took the headphones off, the volume seemed fine.  Guess I should have tried that prior to posting the question, but did not realize that would happen.

  • How do I increase volume for my iPod in the iTunes settings? (Classic 160g)

    I need help adjusting the volume on my iPod Classic 160GB. I know there's a way to go into iTunes with the iPod connected to the computer and adjust, but when my iTunes updated to version 11.0 I have no idea how to do it. Any help would be appreciated.

    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    In iTunes 11 use Control+B to show the Menu bar then go to iTunes>File>Devices>Transfer Purchases
    For other music yo need a thrid-party program like one of those discussed here:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • How do you increase the voicemail volume on an iPhone 4s ( Verizon ). The phone volume is fine. It is when I retrieve voicemails. Even the speakerphone is faint. I have adjusted the side volume buttons and the volume control in settings.What am I missing?

    How do I increase the voicemail volume on an iPhone 4s ( Verizon )? The phone volume is fine. I have adjusted both side volume buttons as well as the volume control in settings.

    Number one - that person has given you false information...the Apple store genius bar supports all Apple products whether in or out of warranty.  Checking is free, service on an out of warranty item is not free.
    Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
    Since you show that you have iOS 7.0.3 you might want to update that iOS to 7.0.4...plug the iPhone in so you are on a solid power source, then while on a WiFi go to Settings > General > Software Update and update to 7.0.4.

  • How do I increase Siri's volume?

    How do I increase the volume of the Siri voice? Both male and female are almost too low to hear.

    Hi,
    Adding more memory may improve performance. That depends on what your projects look like and what sort of instruments you use.
    A faster harddrive always helps improving things for audio files based actions (recording, playing back, using sampled instruments).
    Are you familiar with the buffer settings? Bigger buffer means more latency but generally also less to no overloads. Keep I/O safety buffer disabled. That feature appears to benefit only low spec systems like mine.
    Also you can disable the overload warning alltogether here:
    If Logic stops unasked, it has an overload - I guess you know that now.
    regards, Erik.
    Message was edited by: Eriksimon

  • How do I increase the volume?

    When i hear the song through headphones on Garage Band it is loud. But when i export to
    ITunes and burn to a CD the volume is down too low. How can I increase it?

    There is no problem. It is the fact that you need an extra step in music production to finalize a commercial song. THis step is called Mastering. It is basically applying multi-frequency compression, limiting and EQ to your mix, to raise the overall volume and to enhance the sound for any stereo configuration.
    If you look and the master track in GarageBand you have EQ and Compression that you can use to get higher volumes (by reducing peaks), but the one GarageBand provides is not very good. I recommend using something like Ozone from Izotope or T-Rakcs.

  • How do I increase mic volume in new iPad

    How do I increase mic volume in new iPad

    There is no universal volume control in iOS 5 for the built in mic.
    There are some external mics that can help.

  • How can i increase the volume of 6plus when make phonecalls

    How can I increase the volume when I make the phonecalls. I already tried the normal method like press the slide volume button but it doesn't work.Is there any other methods to solve the problem?

    Did you try that while on a phone call? Also there are different volumes for different devices. If you have your earbuds in and set a volume that will change the volume for when your earbuds are in. If you have a bluetooth headset you can set a volume for that.

  • How i can increase the volume when i playing a video? dont showing the volume control in the player..

    how i can increase the volume when i playing a video? dont showing the volume control in the video player..

    Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.

  • How do I increase voice speaker call volume when ...

    Hi
    http://www.bootstrike.com/NSeriesN95/faq.html
    I have got my brand new N85 8GB, I tried the suggestion (197) in the link above to increase voice speaker call volume when I am in a call, but it did not work, neither for the "Speaker" nor for "Handset".
    Any suggestion ?
    Thanks
    Solved!
    Go to Solution.

    You should increase volume during a phone call with volume keys, unless your keybord is locked during conversation. Try to talk with your phone slided up (open keyboard) and try to increase volume with your side volume controls.
    Good luck

  • How to increase Volume in Logic Pro X without distorting?

    I just recenlty converted to a MacBook Pro. I have Logic Pro X and I've noticed when I load in my Steven Slate Drummer 4, when I click on the drums they are correct volume, but playback makes them VERY quiet, along with everything else I record whether it be guitar or vocals. I NEVER had this problem with any other DAWs and I've used the same method, everyone is saying to use a Limiter, but I find this adds some distortion and makes everything sound terrible. It also barely raises the volumes, I would appreciate all help, I am currently running a home studio and I am recording several artists and really need to figure out how to make the volume normal, I've added compressors on every track to make everything a little loader but it still doesn't compare to what other DAWs put out, however spending $200 I would like to learn and continue with Logic, thanks!

    That's a little odd !! Not quite sure why that wouldn't work… You have assigned your sound to the output track rather than an audio track, but that shouldn't stop it working.
    On the other hand, I wouldn't have done it like that at all
    I would select the midi track to convert and do a "Bounce in place".
    With the default settings, Logic will create a new track with the bounce on it. You can manipulate this new bounce as you please
    Have fun

  • I cannot increase volume on Voice Memo

    Does anyone know how to increase volume on Voice Memo?
    I almost do not hear my messages (unless I shout or put my phone in front of my lips and talk loud).

    Just got a 3GS today and this volume problem was one of the first things I noticed. This has to be fixed - teling people they have to use a headset mic or somesuch, when the speakerphone usage of the built-in mic works just fine, is a cop-out. Obviously an oversight ("bug") in the code. Now if someone could just figure out what the file type of the voice memos is, one could take the files of 3rd party apps that do record at a proper volume and make iTunes recognize them as voice memos. If Apple's going to release something they consider a core iPhone app in this shoddy condition, it's only fair if we get some sort of functional workaround rather than wait for someone's bugfix inbox queue in Cupertino to get caught up on.

Maybe you are looking for

  • Windows vista 64 bit and ipod nano

    Hi, we are having problems getting our 3 new ipod nano generation 5 to work on our windows vista computer. Itunes won't recognize them have tried to uninstall itunes but get a message to verify we have sufficient access to that key, or contact suppor

  • You do not have permissions to open this file on Excel Services.

    Hi all, I am recieving this error: I have setup a trusted location to the document library where the Excel spreadsheet resides, and I still recieved the error.  I changed the location to the entire site and I still recieve the error.  I am the Sharep

  • Mix standard cal and enterprise cal

    Hi all Is it possible to restrict the number of lync session that use enterprise cal if i got more standart cal than enterprise ones. I mean if i got 200 enterprises cal an 1000 standards cal how can i restrict the use of this 200 cals. The goal is w

  • Is it possible to make InDesign files created in CS5.5 backwardly compatible with CS4 and CS3?

    I have recently installed CS5.5 on my iMac running Mac OSX Lion. I have documents that were prepared in CS3 and CS4. They read OK in CS5.5 but I cannot then save them to be read in the earlier versions. Any Ideas please?

  • VMware Fusion for Windows XP

    Hello MacBook Community, I recently bought a MacBook Pro (the one for $1199 with I think the 250G harddrive) after being a PC all of my life. I just finished my senior year of high school, so I will be going to college and find more uses for the MacB