How do I insert a file into an existing portfolio?

I use a feature of Outlook 2010 to move an email message into an Adobe Portfolio. It all happens automatically once I tell Outlook to put it there. My issue is that I put one email msg into the wrong portfolio and want to move it to the proper portfolia. I was able to extract it from the improper portfolio but in so doing, it turned the email message into a pdf file. I do not know how to use Acrobat to add that pdf file to the proper portfolio. I tried combining the file with the portfolio but Acrobat extracted all of the emails from the portfolio as pdf files and then combined all files as a massive pdf file instead of adding it to the portfolio.
Can anyone tell me how to do this or what I might be doing wrong?
Thanks,
Ken

Thanks Lori. That worked to move the file into the correct portfolio as well as to display it in the layout index. My only quibble is that it does not keep it in date order and I was not able to see how to add the email information ( "To", "From", "Subject" and "Date") to the metadata so it would show up in the index. At least I have it in the correct portfolia now, so thanks for that.

Similar Messages

Are Virtual Copies saved in Backups? How do I insert a backup into an existing catalog?

Are Virtual Copies saved in Backups? How do I insert a backup into an existing catalog
I deleted a tif image file that I didn't intend to, which had several LR virtual copies created from it. The virtual copies had a lot of important history that document my print preparation edits. Are these virtual copies saved in the LR backups?
If so, how can I insert them into the catalog I am using? I have made a lot of edits in the two days since my last backup and don't want to lose that history either. Do you suggest I make a current backup before retrieving files from my last backup? I know I'm supposed to go to the backup location and open the last backup, but how do I blend that with the current work from the last 2 days?
Any help would be most appreciated. Thanks, Tom

Rob,
That was exactly what I was after. However, I'm still having trouble getting the virtual copies imported. The master file was in my trash, I restored it to the original hard drive folder. Before I got your message I re- imported it to LR but of course LR came up with a new name since I was importing from and saving it to the same folder in LR. And of course no copies. This may have been a mistake, but before starting the procedure you described, I re-named the master file (it seemed that the import from backup would re-create it so I didn't want a conflict).
Then I did what you said and used the 'Import From Another Catalog' feature. I found the virtual copies in the backup and checked them. But when the import completed, the it gave me file names xxx/Copy1, xxx/Copy2 but there was no image or history or metadata. When I tried to find the folder containing the files, it said it couldn't be found. So I missed something in the settings. When I tried again, there was a warning saying the file(s) exists in the catalog and its settings differ. I went ahead anyway and the message I got was "No Photos in previous import"
Here's what the import from backup shows:
A box with catalog contents and all the folders and files within them, that you can check.
A New Photos section, which gives 2 file handling choices: a)add new photos to the catalog without moving them or b) don't import new photos
A Changed existing photos section with 2 replace options: a) nothing or b) Metadata and develop setting only. If you choose this you can check a box to preserve old settings as a virtual copy.
Not sure what to do. I changed the master file back to its original name, but that didn't make a difference. Suggestions? Thanks, Tom

How do I insert one file into another with track changes intact?

I gather that Pages does not have a way to insert a file into a document in the way that Word has insert file. So all we can do is copy an entire document and then paste it into the second document. But when I do that I lose the track changes, except for the odd comment. What is the way around this?

I'm assuming you're wanting to insert the contents of one Pages document into another. I don't have a need to use tracking, so I'm not sure if this applies but I think it should.
You can insert sections from one Pages document into another. Open your files & show thumbnails. Sections have a yellow border around all of the pages in that section. Now click on the page in the thumbnail pane & copy. If the file is more than one page & you only want one, you'll need to insert a section break to separate the pages. Then go to your other file, click in the thumbnail pane & paste. If you want to insert the other content into the middle of a section in the receiving document, you will need to insert section breaks at the point you want to insert. The whole copied page will be pasted in. Repeat with another section. Styles will copy over with the sections but headers & footers will not.

How do I insert a file into a package upon launch AppV 5

Hello everyone, I have a number of different clients that use the same version of QuickBooks. However, resequencing the same application and storing in the content store is not realistic. I would like to take an existing sequenced package, and have it execute
a script that will pull the license from a shared location based at their site. I am not sure how to write the script or where to put it.
Here is the path where the file is located.
C\ProgramData\Common Files\Intuit\QuickBooks
Thank you for your help
Paul
Duramaxster

Knack, okay, so I create a PS script to insert a file? What is the file path to the path I described above to use in my powershell script? How should it look?
Does this look right for the Powershell command (Saving as QBLicense.ps1)? I am just learning PS. See inBOLD.
Do I have to add the .PS1 file to the Scripts folder in the Package before saving? I am assuming yes...
function Get-ScriptDirectory{
$Invocation = (Get-Variable MyInvocation -Scope 1).Value
Split-Path $Invocation.MyCommand.Path
$vfsPath = Join-Path (Get-ScriptDirectory) ""
write-host$vfsPath
$LICSource = \\Server.local\license\QBLicense.dat
Set-Location $vfsPath\Common AppData\COMMON FILES\INTUIT\QUICKBOOKS
copy-item -path $LICSource -destination $vfsPath
And do I keep this Userscript as is?
<UserScripts>
<StartProcess RunInVirtualEnvironment="false">
<Path>powershell.exe</Path>
<Arguments>-ExecutionPolicy Bypass -File "[{AppVPackageRoot}]\..\Scripts\QBLicense.ps1"</Arguments>
<Wait RollbackOnError="true"/>
IS THIS NEEDED ---> <ApplicationId>[{AppVPackageRoot}]\Sudoku.exe</ApplicationId>
</StartProcess>
</UserScripts>
One more thing, will this run first before the application actually runs, or should I place this in the MachineDeployment script?
Thank you!
Paul
Duramaxster

How do I insert new pages into an existing pages document

I have been doing a newsletter for 18 months in pages. SInce the last update I have been unable to find a way to add a page to my document or change positions of pages. I have searched online for answers which did not help, and all the tutorials I found are not for the updates version. Help, this app is useless if I can't do this!

How could you not find the hundreds, if not thousands, of references here to the missing features in Pages 5?
Apple removed over 100 features from Pages 5 of which these are only a few:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
You should still have Pages '09 in your Applications/iWork folder.
Use that.
Peter

How do I insert multiple photos into an excel document vs inserting each individually? Insert, Picture, From FIle...now what? it only allows me to choose 1 at a time.

Help - How do I insert multiple photos into an excel document vs inserting each individually? Insert, Picture, From FIle...now what? it only allows me to choose 1 at a time.

https://discussions.apple.com/thread/3383532?tstart=0
Stefan

I want to insert .pdf files into a "Master" .pdf file at pre-determined intervals - how do I do this?

I want to insert .pdf files into a "Master" .pdf file at pre-determined intervals - how do I do this?

Hi markm11762689,
When you insert pages, you can determine whether they go before or after the first or last page, or a page number that you specify.
If you're inserting multiple files at once, they will all be inserted in the same spot that you specify in the Select File to Insert dialog box.
There may be a way to handle this programmatically, and there are some very clever folks who visit these forums regularly. Let's see if they chime in...
Best,
Sara

Insert XML file into Relational database model - no XMLTYPE!

Dear all,
How can I store a known complex XML file into an existing relational database WITHOUT using xmltypes in the database ?
I read the article on DBMS_XMLSTORE. DBMS_XMLSTORE indeed partially bridges the gap between XML and RDBMS to a certain extent, namely for simply structured XML (canonical structure) and simple tables.
However, when the XML structure will become arbitrary and rapidly evolving, surely there must be a way to map XML to a relational model more flexibly.
We work in a java/Oracle10 environment that receives very large XML documents from an independent data management source. These files comply with an XML schema. That is all we know. Still, all these data must be inserted/updated daily in an existing relational model. Quite an assignment isn't it ?
The database does and will not contain XMLTYPES, only plain RDBMS tables.
Are you aware of a framework/product or tool to do what DBMS_XMLSTORE does but with any format of XML file ? If not, I am doomed.
Cheers.
Luc.
Edited by: user6693852 on Jan 13, 2009 7:02 AM

In case you decide to follow my advice, here's a simple example showing how to do this.. (Note the XMLTable syntax is the preferred approach in 10gr2 and later..
SQL> spool testase.log
SQL> --
SQL> connect / as sysdba
Connected.
SQL> --
SQL> set define on
SQL> set timing on
SQL> --
SQL> define USERNAME = XDBTEST
SQL> --
SQL> def PASSWORD = XDBTEST
SQL> --
SQL> def USER_TABLESPACE = USERS
SQL> --
SQL> def TEMP_TABLESPACE = TEMP
SQL> --
SQL> drop user &USERNAME cascade
2 /
old   1: drop user &USERNAME cascade
new   1: drop user XDBTEST cascade
User dropped.
Elapsed: 00:00:00.59
SQL> grant create any directory, drop any directory, connect, resource, alter session, create view to &USERNAME identified by &PASS
ORD
2 /
old   1: grant create any directory, drop any directory, connect, resource, alter session, create view to &USERNAME identified by &
ASSWORD
new   1: grant create any directory, drop any directory, connect, resource, alter session, create view to XDBTEST identified by XDB
EST
Grant succeeded.
Elapsed: 00:00:00.01
SQL> alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
2 /
old   1: alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
new   1: alter user XDBTEST default tablespace USERS temporary tablespace TEMP
User altered.
Elapsed: 00:00:00.00
SQL> connect &USERNAME/&PASSWORD
Connected.
SQL> --
SQL> var SCHEMAURL varchar2(256)
SQL> var XMLSCHEMA CLOB
SQL> --
SQL> set define off
SQL> --
SQL> begin
2    :SCHEMAURL := 'http://xmlns.example.com/askTom/TransactionList.xsd';
3    :XMLSCHEMA :=
4 '<?xml version="1.0" encoding="UTF-8"?>
5 
6 <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" xdb:storeVarrayAsTable="true">
7     <xs:element name="TransactionList" type="transactionListType" xdb:defaultTable="LOCAL_TABLE"/>
8     <xs:complexType name="transactionListType" xdb:maintainDOM="false" xdb:SQLType="TRANSACTION_LIST_T">
9             <xs:sequence>
10                     <xs:element name="Transaction" type="transactionType" maxOccurs="unbounded" xdb:SQLCollType="TRANSACTION_V"
>
11             </xs:sequence>
12     </xs:complexType>
13     <xs:complexType name="transactionType" xdb:maintainDOM="false" xdb:SQLType="TRANSACTION_T">
14             <xs:sequence>
15                     <xs:element name="TradeVersion" type="xs:integer"/>
16                     <xs:element name="TransactionId" type="xs:integer"/>
17                     <xs:element name="Leg" type="legType" maxOccurs="unbounded" xdb:SQLCollType="LEG_V"/>
18             </xs:sequence>
19             <xs:attribute name="id" type="xs:integer" use="required"/>
20     </xs:complexType>
21     <xs:complexType name="paymentType" xdb:maintainDOM="false" xdb:SQLType="PAYMENT_T">
22             <xs:sequence>
23                     <xs:element name="StartDate" type="xs:date"/>
24                     <xs:element name="Value" type="xs:integer"/>
25             </xs:sequence>
26             <xs:attribute name="id" type="xs:integer" use="required"/>
27     </xs:complexType>
28     <xs:complexType name="legType" xdb:maintainDOM="false" xdb:SQLType="LEG_T">
29             <xs:sequence>
30                     <xs:element name="LegNumber" type="xs:integer"/>
31                     <xs:element name="Basis" type="xs:integer"/>
32                     <xs:element name="FixedRate" type="xs:integer"/>
33                     <xs:element name="Payment" type="paymentType" maxOccurs="unbounded" xdb:SQLCollType="PAYMENT_V"/>
34             </xs:sequence>
35             <xs:attribute name="id" type="xs:integer" use="required"/>
36     </xs:complexType>
37 </xs:schema>';
38 end;
39 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
SQL> set define on
SQL> --
SQL> declare
2    res boolean;
3    xmlSchema xmlType := xmlType(:XMLSCHEMA);
4 begin
5    dbms_xmlschema.registerSchema
6    (
7      schemaurl => :schemaURL,
8      schemadoc => xmlSchema,
9      local     => TRUE,
10      genTypes => TRUE,
11      genBean   => FALSE,
12      genTables => TRUE,
13      ENABLEHIERARCHY => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
14    );
15 end;
16 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.26
SQL> desc LOCAL_TABLE
Name                                                                   Null?    Type
TABLE of SYS.XMLTYPE(XMLSchema "http://xmlns.example.com/askTom/TransactionList.xsd" Element "TransactionList") STORAGE Object-rela
ional TYPE "TRANSACTION_LIST_T"
SQL> --
SQL> create or replace VIEW TRAN_VIEW
2 as
3 select
4    extractvalue(x.column_value,'/Transaction/TradeVersion/text()') tradeversion,
5    extractvalue(x.column_value,'/Transaction//text()') transactionid
6 from
7    local_table,
8    table(xmlsequence(extract(OBJECT_VALUE,'/TransactionList/Transaction'))) x
9 /
View created.
Elapsed: 00:00:00.01
SQL> create or replace VIEW TRAN_LEG_VIEW
2 as
3 select
4    extractvalue(x.column_value,'/Transaction/TransactionId/text()') transactionid,
5    extractvalue(y.column_value,'/Leg/Basis/text()') leg_basis,
6    extractValue(y.column_value,'/Leg/FixedRate/text()') leg_fixedrate
7 from
8    local_table,
9    table(xmlsequence(extract(OBJECT_VALUE,'/TransactionList/Transaction'))) x,
10    table(xmlsequence(extract(x.column_value,'/Transaction/Leg'))) y
11 /
View created.
Elapsed: 00:00:00.01
SQL> create or replace VIEW TRAN_LEG_PAY_VIEW
2 as
3 select
4    extractvalue(x.column_value,'/Transaction/TransactionId/text()') transactionid,
5    extractvalue(y.column_value,'/Leg/LegNumber/text()') leg_legnumber,
6    extractvalue(z.column_value,'/Payment/StartDate/text()') pay_startdate,
7    extractValue(z.column_value,'/Payment/Value/text()') pay_value
8 from
9    local_table,
10    table(xmlsequence(extract(OBJECT_VALUE,'/TransactionList/Transaction'))) x,
11    table(xmlsequence(extract(x.column_value,'/Transaction/Leg'))) y,
12    table(xmlsequence(extract(y.column_value,'/Leg/Payment'))) z
13 /
View created.
Elapsed: 00:00:00.03
SQL> desc TRAN_VIEW
Name                                                                   Null?    Type
TRADEVERSION                                                                    NUMBER(38)
TRANSACTIONID                                                                   VARCHAR2(4000)
SQL> --
SQL> desc TRAN_LEG_VIEW
Name                                                                   Null?    Type
TRANSACTIONID                                                                   NUMBER(38)
LEG_BASIS                                                                       NUMBER(38)
LEG_FIXEDRATE                                                                   NUMBER(38)
SQL> --
SQL> desc TRAN_LEG_PAY_VIEW
Name                                                                   Null?    Type
TRANSACTIONID                                                                   NUMBER(38)
LEG_LEGNUMBER                                                                   NUMBER(38)
PAY_STARTDATE                                                                   DATE
PAY_VALUE                                                                       NUMBER(38)
SQL> --
SQL> create or replace VIEW TRAN_VIEW_XMLTABLE
2 as
3 select t.*
4    from LOCAL_TABLE,
5         XMLTable
6         (
7            '/TransactionList/Transaction'
8            passing OBJECT_VALUE
9            columns
10            TRADE_VERSION NUMBER(4) path 'TradeVersion/text()',
11            TRANSACTION_ID NUMBER(4) path 'TransactionId/text()'
12         ) t
13 /
View created.
Elapsed: 00:00:00.01
SQL> create or replace VIEW TRAN_LEG_VIEW_XMLTABLE
2 as
3 select t.TRANSACTION_ID, L.*
4    from LOCAL_TABLE,
5         XMLTable
6         (
7            '/TransactionList/Transaction'
8            passing OBJECT_VALUE
9            columns
10            TRANSACTION_ID NUMBER(4) path 'TransactionId/text()',
11            LEG            XMLType   path 'Leg'
12         ) t,
13         XMLTABLE
14         (
15           '/Leg'
16           passing LEG
17           columns
18           LEG_NUMBER     NUMBER(4) path 'LegNumber/text()',
19           LEG_BASIS      NUMBER(4) path 'Basis/text()',
20           LEG_FIXED_RATE NUMBER(4) path 'FixedRate/text()'
21         ) l
22 /
View created.
Elapsed: 00:00:00.01
SQL> create or replace VIEW TRAN_LEG_PAY_VIEW_XMLTABLE
2 as
3 select TRANSACTION_ID, L.LEG_NUMBER, P.*
4    from LOCAL_TABLE,
5         XMLTable
6         (
7            '/TransactionList/Transaction'
8            passing OBJECT_VALUE
9            columns
10            TRANSACTION_ID NUMBER(4) path 'TransactionId/text()',
11            LEG            XMLType   path 'Leg'
12         ) t,
13         XMLTABLE
14         (
15           '/Leg'
16           passing LEG
17           columns
18           LEG_NUMBER     NUMBER(4) path 'LegNumber/text()',
19           PAYMENT        XMLType   path 'Payment'
20         ) L,
21         XMLTABLE
22         (
23           '/Payment'
24           passing PAYMENT
25           columns
26           PAY_START_DATE     DATE      path 'StartDate/text()',
27           PAY_VALUE          NUMBER(4) path 'Value/text()'
28         ) p
29 /
View created.
Elapsed: 00:00:00.03
SQL> desc TRAN_VIEW_XMLTABLE
Name                                                                   Null?    Type
TRADE_VERSION                                                                   NUMBER(4)
TRANSACTION_ID                                                                  NUMBER(4)
SQL> --
SQL> desc TRAN_LEG_VIEW_XMLTABLE
Name                                                                   Null?    Type
TRANSACTION_ID                                                                  NUMBER(4)
LEG_NUMBER                                                                      NUMBER(4)
LEG_BASIS                                                                       NUMBER(4)
LEG_FIXED_RATE                                                                  NUMBER(4)
SQL> --
SQL> desc TRAN_LEG_PAY_VIEW_XMLTABLE
Name                                                                   Null?    Type
TRANSACTION_ID                                                                  NUMBER(4)
LEG_NUMBER                                                                      NUMBER(4)
PAY_START_DATE                                                                  DATE
PAY_VALUE                                                                       NUMBER(4)
SQL> --
SQL> set long 10000 pages 100 lines 128
SQL> set timing on
SQL> set autotrace on explain
SQL> set heading on feedback on
SQL> --
SQL> VAR DOC1 CLOB
SQL> VAR DOC2 CLOB
SQL> --
SQL> begin
2    :DOC1 :=
3 '<TransactionList>
4    <Transaction id="1">
5      <TradeVersion>1</TradeVersion>
6      <TransactionId>1</TransactionId>
7      <Leg id="1">
8        <LegNumber>1</LegNumber>
9        <Basis>1</Basis>
10        <FixedRate>1</FixedRate>
11        <Payment id="1">
12          <StartDate>2000-01-01</StartDate>
13          <Value>1</Value>
14        </Payment>
15        <Payment id="2">
16          <StartDate>2000-01-02</StartDate>
17          <Value>2</Value>
18        </Payment>
19      </Leg>
20      <Leg id="2">
21        <LegNumber>2</LegNumber>
22        <Basis>2</Basis>
23        <FixedRate>2</FixedRate>
24        <Payment id="1">
25          <StartDate>2000-02-01</StartDate>
26          <Value>10</Value>
27        </Payment>
28        <Payment id="2">
29          <StartDate>2000-02-02</StartDate>
30          <Value>20</Value>
31        </Payment>
32      </Leg>
33    </Transaction>
34    <Transaction id="2">
35      <TradeVersion>2</TradeVersion>
36      <TransactionId>2</TransactionId>
37      <Leg id="1">
38        <LegNumber>21</LegNumber>
39        <Basis>21</Basis>
40        <FixedRate>21</FixedRate>
41        <Payment id="1">
42          <StartDate>2002-01-01</StartDate>
43          <Value>21</Value>
44        </Payment>
45        <Payment id="2">
46          <StartDate>2002-01-02</StartDate>
47          <Value>22</Value>
48        </Payment>
49      </Leg>
50      <Leg id="22">
51        <LegNumber>22</LegNumber>
52        <Basis>22</Basis>
53        <FixedRate>22</FixedRate>
54        <Payment id="21">
55          <StartDate>2002-02-01</StartDate>
56          <Value>210</Value>
57        </Payment>
58        <Payment id="22">
59          <StartDate>2002-02-02</StartDate>
60          <Value>220</Value>
61        </Payment>
62      </Leg>
63    </Transaction>
64 </TransactionList>';
65    :DOC2 :=
66 '<TransactionList>
67    <Transaction id="31">
68      <TradeVersion>31</TradeVersion>
69      <TransactionId>31</TransactionId>
70      <Leg id="31">
71        <LegNumber>31</LegNumber>
72        <Basis>31</Basis>
73        <FixedRate>31</FixedRate>
74        <Payment id="31">
75          <StartDate>3000-01-01</StartDate>
76          <Value>31</Value>
77        </Payment>
78      </Leg>
79    </Transaction>
80 </TransactionList>';
81 end;
82 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.01
SQL> insert into LOCAL_TABLE values ( xmltype(:DOC1))
2 /
1 row created.
Elapsed: 00:00:00.01
Execution Plan
Plan hash value: 1
| Id | Operation                | Name        | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | INSERT STATEMENT         |             |     1 |   100 |     1   (0)| 00:00:01 |
|   1 | LOAD TABLE CONVENTIONAL | LOCAL_TABLE |       |       |            |          |
SQL> insert into LOCAL_TABLE values ( xmltype(:DOC2))
2 /
1 row created.
Elapsed: 00:00:00.01
Execution Plan
Plan hash value: 1
| Id | Operation                | Name        | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | INSERT STATEMENT         |             |     1 |   100 |     1   (0)| 00:00:01 |
|   1 | LOAD TABLE CONVENTIONAL | LOCAL_TABLE |       |       |            |          |
SQL> select * from TRAN_VIEW_XMLTABLE
2 /
TRADE_VERSION TRANSACTION_ID
            1              1
            2              2
           31             31
3 rows selected.
Elapsed: 00:00:00.03
Execution Plan
Plan hash value: 650975545
| Id | Operation          | Name                           | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT   |                                |     3 |   168 |     3   (0)| 00:00:01 |
|   1 | NESTED LOOPS      |                                |     3 |   168 |     3   (0)| 00:00:01 |
|* 2 |   TABLE ACCESS FULL| SYS_NTGgl+TKyhQnWoFRSrCxeX9g== |     3 |   138 |     3   (0)| 00:00:01 |
|* 3 |   INDEX UNIQUE SCAN| SYS_C0010174                   |     1 |    10 |     0   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - filter("SYS_NC_TYPEID$" IS NOT NULL)
   3 - access("NESTED_TABLE_ID"="LOCAL_TABLE"."SYS_NC0000800009$")
Note
   - dynamic sampling used for this statement
SQL> select * from TRAN_LEG_VIEW_XMLTABLE
2 /
TRANSACTION_ID LEG_NUMBER LEG_BASIS LEG_FIXED_RATE
             1          1          1              1
             1          2          2              2
             2         21         21             21
             2         22         22             22
            31         31         31             31
5 rows selected.
Elapsed: 00:00:00.04
Execution Plan
Plan hash value: 1273661583
| Id | Operation           | Name                           | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT    |                                |     5 |   560 |     7 (15)| 00:00:01 |
|* 1 | HASH JOIN          |                                |     5 |   560 |     7 (15)| 00:00:01 |
|   2 |   NESTED LOOPS      |                                |     3 |   159 |     3   (0)| 00:00:01 |
|* 3 |    TABLE ACCESS FULL| SYS_NTGgl+TKyhQnWoFRSrCxeX9g== |     3 |   129 |     3   (0)| 00:00:01 |
|* 4 |    INDEX UNIQUE SCAN| SYS_C0010174                   |     1 |    10 |     0   (0)| 00:00:01 |
|* 5 |   TABLE ACCESS FULL | SYS_NTUmyermF/S721C/2UXo40Uw== |     5 |   295 |     3   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - access("SYS_ALIAS_1"."NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0000800009$")
   3 - filter("SYS_NC_TYPEID$" IS NOT NULL)
   4 - access("NESTED_TABLE_ID"="LOCAL_TABLE"."SYS_NC0000800009$")
   5 - filter("SYS_NC_TYPEID$" IS NOT NULL)
Note
   - dynamic sampling used for this statement
SQL> select * from TRAN_LEG_PAY_VIEW_XMLTABLE
2 /
TRANSACTION_ID LEG_NUMBER PAY_START PAY_VALUE
             1          1 01-JAN-00          1
             1          1 02-JAN-00          2
             1          2 01-FEB-00         10
             1          2 02-FEB-00         20
             2         21 01-JAN-02         21
             2         21 02-JAN-02         22
             2         22 01-FEB-02        210
             2         22 02-FEB-02        220
            31         31 01-JAN-00         31
9 rows selected.
Elapsed: 00:00:00.07
Execution Plan
Plan hash value: 4004907785
| Id | Operation            | Name                           | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |                                |     9 | 1242 |    10 (10)| 00:00:01 |
|* 1 | HASH JOIN           |                                |     9 | 1242 |    10 (10)| 00:00:01 |
|* 2 |   HASH JOIN          |                                |     5 |   480 |     7 (15)| 00:00:01 |
|   3 |    NESTED LOOPS      |                                |     3 |   159 |     3   (0)| 00:00:01 |
|* 4 |     TABLE ACCESS FULL| SYS_NTGgl+TKyhQnWoFRSrCxeX9g== |     3 |   129 |     3   (0)| 00:00:01 |
|* 5 |     INDEX UNIQUE SCAN| SYS_C0010174                   |     1 |    10 |     0   (0)| 00:00:01 |
|* 6 |    TABLE ACCESS FULL | SYS_NTUmyermF/S721C/2UXo40Uw== |     5 |   215 |     3   (0)| 00:00:01 |
|* 7 |   TABLE ACCESS FULL | SYS_NTelW4ZRtKS+WKqCaXhsHnNQ== |     9 |   378 |     3   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - access("NESTED_TABLE_ID"="SYS_ALIAS_1"."SYS_NC0000900010$")
   2 - access("SYS_ALIAS_1"."NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0000800009$")
   4 - filter("SYS_NC_TYPEID$" IS NOT NULL)
   5 - access("NESTED_TABLE_ID"="LOCAL_TABLE"."SYS_NC0000800009$")
   6 - filter("SYS_NC_TYPEID$" IS NOT NULL)
   7 - filter("SYS_NC_TYPEID$" IS NOT NULL)
Note
   - dynamic sampling used for this statement
SQL>Out of interest why are you so against using XMLType...
Edited by: mdrake on Jan 13, 2009 8:25 AM

Insert XML file into Relational database model without using XMLTYPE tables

Dear all,
How can I store a known complex XML file into an existing relational database WITHOUT using xmltypes in the database ?
I read the article on DBMS_XMLSTORE. DBMS_XMLSTORE indeed partially bridges the gap between XML and RDBMS to a certain extent, namely for simply structured XML (canonical structure) and simple tables.
However, when the XML structure will become arbitrary and rapidly evolving, surely there must be a way to map XML to a relational model more flexibly.
We work in a java/Oracle10 environment that receives very large XML documents from an independent data management source. These files comply with an XML schema. That is all we know. Still, all these data must be inserted/updated daily in an existing relational model. Quite an assignment isn't it ?
The database does and will not contain XMLTYPES, only plain RDBMS tables.
Are you aware of a framework/product or tool to do what DBMS_XMLSTORE does but with any format of XML file ? If not, I am doomed.
Constraints : Input via XML files defined by third party
Storage : relational database model with hundreds of tables and thousands of existing queries that can not be touched. The model must not be altered.
Target : get this XML into the database on a daily basis via an automated process.
Cheers.
Luc.

Luc,
your Doomed !
If you would try something like DBMS_XMLSTORE, you probably would be into serious performance problems in your case, very fast, and it would be very difficult to manage.
If you would use a little bit of XMLType stuff, you would be able to shred the data into the relational model very fast and controlable. Take it from me, I am one of those old geezers like Mr. Tom Kyte way beyond 40 years (still joking). No seriously. I started out as a classical PL/SQL, Forms Guy that switched after two years to become a "DBA 1.0" and Mr Codd and Mr Date were for years my biggest hero's. I have the utmost respect for Mr. Tom Kyte for all his efforts for bringing the concepts manual into the development world. Just to name some off the names that influenced me. But you will have to work with UNSTRUCTURED data (as Mr Date would call it). 80% of the data out there exists off it. Stuff like XMLTABLE and XML VIEWs bridge the gap between that unstructured world and the relational world. It is very doable to drag and drop an XML file into the XMLDB database into a XMLtype table and or for instance via FTP. From that point on it is in the database. From there you could move into relational tables via XMLTABLE methods or XML Views.
You could see the described method as a filtering option so XML can be transformed into relational data. If you don't want any XML in your current database, then create an small Oracle database with XML DB installed (if doable 11.1.0.7 regarding the best performance --> all the new fast optimizer stuff etc). Use that database as a staging area that does all the XML shredding for you into relational components and ship the end result via database links and or materialized views or other probably known methodes into your relational database that isn't allowed to have XMLType.
This way you would keep your realtional Oracle database clean and have the Oracle XML DB staging database do all the filtering and shredding into relational components.
Throwing the XML DB option out off the window beforehand would be like replacing your Mercedes with a bicycle. With both you will be able to travel the distance from Paris to Rome, but it will take you a hell of lot longer.
:-)

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

bhsleadership
I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
1. Are you working from the 8.0/8.0.1 Update of the program?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
For Background Rendering option. See Edit Menu/Preferences/General.
For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
Is your computer optimized in spite of the fact that you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
Looking at the properties of your source media, I see:
video compression = MPEG1
audio compression = MPEG-Layer1 (.mp2)
Frame Size = 640 x 480 (4:3)
Pixel Aspect Ratio = 1.0
Frame Rate = 30 progressive frames per second
With properties like those you are sure to get a red line over that content since there is no project preset with that description.
But, your choice of the default NTSC DV Standard would have been mine also.
I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
To be continued.
ATR

Inserting PDF file into Clob

Hi,
I tried inserting PDF file into a CLOB column , in the below example l_bfile is a bfile datatype.
and I'm inserting l_bfile to CLOB column.
l_bfile := bfilename('C:\test', 'test.pdf');
But It is throwing below error:
ORA-06550: line 9, column 42:
PL/SQL: ORA-00932: inconsistent datatypes: expected NUMBER got FILE
ORA-06550: line 9, column 1:
PL/SQL: SQL Statement ignored
Please advise me on this.
thanks,
Jagu
Edited by: user11221603 on Oct 11, 2012 6:18 AM

Hi,
Check this thread: How to store PDF file in BLOB column without using indirect datastore
Regards.
Al

Urgent - pls help - Problem while inserting binary file into Oracle DB

Hi,
I am trying to insert binary files into a Blob column in a Oracle 10G table.
The binary files would be uploaded by the web users and hence come as multipart request. I use apache commons upload streaming API to handle it. Finally i am getting a input stream of the uploaded file.
The JDBC code is
PreparedStatement ps=conn.prepareStatement("insert into bincontent_table values(?)");
ps.setBinaryStream(1,inStream,length);
My problem starts when i try to find the length of the stream. available() method of inputstream does not return the full length of the stream. so i put a loop to read thru the stream and find the length as shown below
int length=0;
while((v=inStream.read())!=-1)
length++;
Now, though i got the length, my stream pointer has reached the end and i cant reset it(it throws an error if i try).
So i copied the stream content to a byte array and created an ByteArrayInputStream like this.
tempByteArray=new byte[length];
stream.read(tempByteArray,0,length);
ByteArrayInputStream bais=new ByteArrayInputStream(tempByteArray);
Now if i pass this bytearray input stream instead of the normal input stream to the prepared statement's setBinaryStream() method it throws an error as
"ORA-01460: unimplemented or unreasonable conversion requested".
Now how to solve this?
My doubts are ,
1) preparedStatement.setBinaryStream(int parameterIndex, InputStream x, int length) expects an inputstream and its length. if i have the stream how to find its length with out reading the stream?
2) Also as the length parameter is a integer, what if i have a large binary file whose length runs more than the capacity of integer
3) Alternatively there is a setBlob(int i, Blob x) in prepared statement. But how to instantiate a Blob object and set it here
4) Is there any better way to do this.
Thanks in advance

"ORA-01460: unimplemented or unreasonable conversion
requested".When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB (reference: javadoc)
1) preparedStatement.setBinaryStream(int parameterIndex,
InputStream x, int length) expects an inputstream and its length. if i
have the stream how to find its length with out reading the stream?no. stream may have no specified length. i think you have wrong understanding about stream.
2) Also as the length parameter is a integer, what if i have a large
binary file whose length runs more than the capacity of integer
3) Alternatively there is a setBlob(int i, Blob x) in prepared statement.
But how to instantiate a Blob object and set it here
4) Is there any better way to do this.use ps.setBlob(1, instream) instead

How do I insert an image into a quetsion (post)

What are Mozilla code-structure in new posts.?
How do I insert an image into a new post?
Thank you

cor-el said
If the image is on another server then we prefer to have a link instead of the real image in case it is a large image and we've already seen it or do not want to wait for it to load (server may be slow).
I do not know what any of this means.
I have a single laptop connected to the internet.
So far I have worked out how to upload an image to a thread-reply by copying the uploaded file "path" and pasting it onto the reply
and then after the reply is posted there are two incidence of each image
1. the URL
2. the image at the bottom of the reply
I am a newbie so would appreciate any feedback
(Firefox window controls have disappeared (Clean installed v18 5 days ago). Have logged another thread/reply on this forum)
Thanks

Error while inserting .doc file into CLOB object in oracle

hello everybody ,
i am trying to insert .doc file into clob column in oracle database.i am using oracle 8i. But i am getting error saying
ORA-01461: can bind a LONG value only for insert into a LONG column
i have no clue.
i am pasting code here
please help me out.
regards
darshan
import java.io.File;
import java.io.FileInputStream;
import java.io.FileReader;
import java.io.Reader;
import java.sql.Connection;
import java.sql.PreparedStatement;
public class InsertingClob {
public static void main(String[] args) {
File f = new File("E:\\dar
sowres.doc");
int len = (int) f.length();
System.out.println(len);
Connection conn = null;
PreparedStatement ps = null;
try {
FileReader fr = new FileReader(f);
String FILE_INSERT_QUERY = "INSERT INTO RESUMED VALUES(?,?)";
conn = JDBCUtility.getConnection();
ps = conn.prepareStatement(FILE_INSERT_QUERY);
ps.setString(1,"1");
ps.setCharacterStream(2,fr,len);
int result = ps.executeUpdate();
if(result ==1) {
System.out.println("file has been successfully inserted into the db");;
}else {
System.out.println("not inserted");
}catch (Exception e) {
e.printStackTrace();
and the error is
java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:582)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1986)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1144)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2152)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2035)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2876)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:609)
at InsertBlob.main(InsertBlob.java:21)
java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column

You may have one of a few errors going for you there:
The error says your column in Oracle is a Long not a CLOB, if it is, then make your column a CLOB.
CLOB's are not suppored in all environments and/or all interfaces (specifically Windoz ODBC has a problem).
I believe a DOC (Windoz MS-Word) file is a BLOB, due to formatting characters in the file.
I had a very similar error using Access and trying to do this, but changing to SAS fixed the problem. It could very well be that your version of ODBC/JDBC drivers does not support it properly.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How do I insert a file into an existing portfolio?

Similar Messages

Maybe you are looking for