How do I insert a hyperlink in Keynote 6.1?

How do I insert a hyperlink in Keynote 6.1?  The newer verision is very difficult to find previous commands and I do not like the Inspector.  So many options have been removed.

Right click an object on the Keynote canvas > Insert Link

Similar Messages

  • How do I insert a hyperlink in Fireworks?

    How do I insert a hyperlink in Fireworks? I had to create it
    in Dreamweaver, but when I previewed it, when I passed the mouse
    over the link phrase it dissapears. Is it possible to do it in
    Fireworks?

    There are times when you would insert a url into fireworks, such as creating hotspots or pop-up menus. You may do so from the properities panal at the bottom of the screen. I've read that you nust insert the entire url when doing so: http//www.filename.html, but I was unsure. I was hoping to confirm this. If you can do it in dreamweaver, even with popuus that would be better.

  • How do I add a hyperlink in keynote

    Same question.
    How do I add a hyperlink to a keynote slide?

    Can't I just click on the link and have it go top the site? 
    The presentation must be in play for the link to be active.
    I get the window shown here.
    Your link doesnt work as it is an address for a file on your computer. Use the camera button in the menu bar of a reply to a post to show images.

  • How do I insert a hyperlink in an e-mail?

    when I compose an e-mail, occasionally I would like to insert a hyperlink. I can do this operation if I use a browser other than Firefox.
    I am using Microsoft XP. I am trying to do this operation using Mozilla Firefox. How do I accomplish this?

    Webmail sites typically have a link tool that appears on the formatting bar above the compose box. The specifics might vary but generally speaking, if you click the button for the link tool, paste the link, then OK that, a link should be inserted at the current cursor position.
    To see what I mean for Yahoo! mail, check out this thread: [https://support.mozilla.org/en-US/questions/938081 url is not highlighted when sending it on an email and cannot be directly accessed].
    Does that help?

  • How do you insert bullets into a keynote presentation?

    I am trying to insert bullets into a custom keynote presentation.  How do you do this?  Then, I need to convert to powerpoint.  Haven't had to do this before.  Is there someone who can walk me through it?

    see the following thread:  https://discussions.apple.com/message/5876208#5876208
    There is also Keynote '09 User Guide available to you in your Help Menu which can be downloaded for free.
    I recommend Chapter 4 for starters.
    Good luck

  • How do you prevent your hyperlinks in Keynote 6.5. from changing?

    Dear Apple community,
    Since I installed the new Keynote version 6.5. I have troubles creating hyperlinks. Whenever I link an email-address or URL to a text object or shape the link gets changed afterwards. For example:
    Display: [email protected]
    Email: [email protected]
    will be changed automatically in:
    Display: [email protected]
    Email: [email protected] (this mail address can be any random email address that has been mentioned in another link in the document before)
    Things I tried:
    - Press enter first
    - Create a new text field instead of copying another textfield in which I simply change the link
    I suspect this to be a bug, but it could be I am doing something wrong. Can anyone help me out? Thank you very much in advance!

    Im not aware of any previous concerns with hyperlinks in 6.5, hyperlinks work perfectly all our systems
    Try resetting Keynote:   delete Keynote using a removal tool Mac App Cleaner is free, (you must use a removal tool for this tequnique to work)
    empty trash
    install from Mac App Store

  • How to insert a hyperlink to RETURN TO FRONT PAGE?

    I just now played a photo slide show that I made last night. There is no way to exit that page to go back to the Table of Contents page/Site Menu.
    How do I insert a hyperlink in all the pages so a visitor can return to the first page, or at least to the Table of Contents page/Site Menu.
    Also, there was no navigation bar on the slide show. Instead, there were clickable thumbnails of the slide show. Is this as iWeb made it to be?
    — Lorna in Southern California

    Sorry to bother you, but i did find the answer to my question by going to the Help Menu, which I forgot all about in my concern. So to keep this from being a total waste of your time, here are the instructions for making a hyperlink to another page. Again, I apologize. -Lorna
    Adding a text hyperlink
    You can create a text hyperlink that opens a webpage or a new email message, or downloads a file.
    To add a text hyperlink using the Link Inspector:
    1. Select the text you want to turn into a hyperlink.
    2. If the Link Inspector isn't open, click Inspector in the toolbar (or choose View > Show Inspector), and then click the Link Inspector button.
    3. In the Link Inspector, select "Enable as a hyperlink," and then choose an option from the Link To pop-up menu:
    • One of My Pages: Opens another page in any of your iWeb websites. Choose the page from the Page pop-up menu.
    • An External Page: Opens any webpage for which you know thethe website address. Type the address in the URL field.
    • A File: Downloads a file to the visitor's computer. (The file is part of your website; visitors won't have access to your computer.)
    • An Email Message: Opens a new email message containing the email address and subject you specify.

  • How to insert a hyperlink into a Paragraph text

    hi everybody~
    for example:
    this encourages people to answer for points and helps you track answers.
    how can I insert a hyperlink in the word:"answer for points"?
    Louis.

    Hi Louis,
    Write the following code in your compositionReady event handler :
    var text_answer = "this encourages people to";
    text_answer += "<a target='_blank' href='http://www.<etc.>'>answer for points</a>";
    text_answer += "and helps you track answers.<br>";
    sym.$("<textElementName>").html( text_answer);
    // or if needed sym.getSymbol("<symbolInstanceName>").$("<textElementName>").html( text_answer);
    Gil

  • How to insert fonts into ipad keynote

    how i csn insert fonts into ipad keynote from PC (HP laptob )?

    You cannot add fonts to iOS.

  • I do I insert a hyperlink in e-mail. Insert feature does not seem to work.

    How do I insert a hyperlink in e-mail? Insert feature does no seem to work.
    == This happened ==
    Every time Firefox opened
    == the beginning

    The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
    You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
    Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
    Check the tooltip of each button by hovering with the mouse over each button.
    Make Link - https://addons.mozilla.org/firefox/addon/142

  • How can I insert a Pages, Doc, or PDF file into a Keynote presentation?

    I need to insert a document (.pages, .doc, or .pdf anyone) into a Keynote for a portfolio that I must present.  How can I do this?  It doesn't give me that option under hyperlink in inspector. 

    the best is to insert screenshot directly in keynote. If it's for a paper version save everything as pdf and compile with "combine pdf".

  • How do you insert live web pages in keynote?

    How do you insert live web pages in keynote?

    Insert a 2D Pie chart on the slide (Insert > Chart > 2D Pie), then place a circle from Shapes overlaid in the centre:

  • Can anyone advise me how to insert a hyperlink into a project I am using Captivate 5?

    Can anyone advise me how to insert a hyperlink into a project - I am using Captivate 5

    You can use an interactive object such as a click box placed over the top of a text caption, or a button, to link to the URL.  However, these will not strictly-speaking appear identical to hyperlinks.
    If you really want to replicate the rollover appearance of a true HTML text hyperlink, then you might consider the Hyperlink widget from Infosemantics:
    http://www.infosemantics.com.au/adobe-captivate-widgets/hyperlink-interactive/help
    Free trial versions for download hers:
    http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

  • How to insert a hyperlink in mail content for workflow

    Experts,
    I want to insert a hyperlink in mail content when i use sendmail type step in workflow.
    How to do it?
    Thanks you very much!

    Hi, Venkat
      Thanks you for your help!
      I try to use '<a href=''https://login.yahoo.com/config/login_verify2?&.src=ym''>Yahoo mail</a>' in the mail, but
      my outlook display the mail content is '<a href=''https://login.yahoo.com/config/login_verify2?&.src=ym''>Yahoo mail</a>',
      is not a hyperlink.
    Ken.Li

  • How to insert a HYPERLINK in a template Editable Field?

    Question:  How to insert a HYPERLINK in a template Editable Field?
    Hi
    Does anyone know how to insert a HYPERLINK in a template Editable Field?
    I want the link to always display the word "Cities".
    But the URL will change with each child page.
    Here's what I've got so far . . .
    <!-- TemplateBeginEditable name="Cities" -->Cities<!-- TemplateEndEditable -->
    Thanks so much!

    NOTE: This is to go into the TEMPLATE
    Your best bet is to keep the hyperlink OUT of the editable Field and to make the HREF attribute of the link editable.
    This would go in the head of your document:
    <!-- TemplateParam name="href" type="URL" value="" -->
    This would go where you want the link to appear:
    <a href="@@(href)@@">cities</a>
    THE BETTER WAY: You can either paste these quotes into the appropriate places in your template or you can insert:
    <a href="#">cities</a>
    and click inside the opening <a> tag.
    Then go to Modify > Templates > Make Attribute Editable
    In the dialog box "Editable Tag Attributes" you should now see "Choose which attributes of this A tag should be editable."
    If HREF is not showing in the drop-down, do Add and put it there.
    Check the box to Make this attribute editable.
    Give a name for this editable attribute (if you have more than one on a page, you will want it to be understandable, like "cities" for your cities links).
    Make sure it is of Type URL
    If you want a default URL in place, put one in the Default field.
    Then push OK.
    To use it, on each page, do Modify > Template Properties... choose the property to edit, and put the new URL in the entry field.
    Press OK.
    Beth

Maybe you are looking for

  • Transfer balance from one GL account to another, then restict posting

    Hi Gurus, We have an GL account (650045) showing balances ($ 4656)  and client wants to this balance to another GL account ( 650198) and close then 650045 and see that no postings are allowed in 650045. Can you please let me know how to do this trans

  • (Solved) one sound application at a time

    hello,archers! I moved from gnome to Kde(at last) and faced the issue. E.G if amarok plays musik there's no system notifications and smplayer plays no sound t.i only one programm can use alsa at a time. I have latest kde, alsa and gstreamer and xine

  • Update error while creating production order (TCODE CO01)

    Hello, We have created new plant into development server for testing. We have created production Order few days back at that time we have not faced any problem. But from last two days , when we create new production Order , system gives following err

  • Spry Radio Button widget for CS3

    Hi, I can't seem to find a definitive answer if the Spry Radio Button widget for CS3 is available or not. The help menu says that it's there, but I can't find it. I've updated my Spry and checked the web and can't find an answer. Can anyone help me o

  • Adobe Forms - Usage Error

    Adobe Forms work fine in the development system. However in the quality system while testing it is aborting with a USAGE ERROR. All these jobs for printing are background jobs.I have used FP_JOB_OPEN, form function call and FP_JOB_CLOSE in the correc