How do i insert a splash screen or a loading screen and a application image for a phone app on Dream

How do i insert a splash screen or a loading screen and a application image for a phone app on Dreamweaver 6, 5.5 had the mobile application setting that is seemingly no longer present? and i also heard you can use animanted backgrounds on the mobile application in dreamweaver 6 but figuring out how to set the splash screen and application image like it was in 5.5 would be nice. All i can get to pull up is the web application i developed i am trying to build into a phone app on google chrome, if i could officially designate it as a phone app where i can set each splash screen and app image to where it is recognized as a phone app that would be really nice.

Duely noted, the server will still not connect, so i have left an inquery in the suggested forum.
Date: Mon, 15 Oct 2012 07:37:34 -0600
From: [email protected]
To: [email protected]
Subject: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    Re: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    created by David_Powers in Developing server-side applications in Dreamweaver - View the full discussion
jmed0411 wrote: the phonegap program loads for quite some time and eventually reaches to the unfortunate conclusion that the server cannot be reached and to please try again. Any ideas on how that problem can be mended if the solution is in my hands?? I haven't used PhoneGap Build recently, but I have seen several reports about problems connecting to the server. One suggestion that I've heard is that there has been unexpectedly high demand on the server since the launch of Edge Tools and Services as part of the Creative Cloud last month. As far as I know, the only thing you can do is wait, and try again later. You could also try posting in the PhoneGap Build forum: http://community.phonegap.com/nitobi/products/nitobi_phonegap_build.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4774799#4774799
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4774799#4774799
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4774799#4774799. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Developing server-side applications in Dreamweaver by email or at Adobe Community
  For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • How can I create an icon that when clicked will open and maximize an image file?

    How do I create a icon that when clicked will open and maximize an image file?  I have tried to use the simple image widget with maximize upon tap/click - however I am can only size the image really small and put on the page.  I'd prefer to have a graphic that when clicked it simply opens up the image.  This is for a very simple question/answer book.   The user is suppose to look at a picture and locate something.  I want to put an 'Answer' graphic on the image and then the user can click the 'answer' graphic and it will open up the picture with the answer identified. 
    Is this possible?

    Have yiu tried the PopOver widget?  You can drop an image into it, maximise the image and the widgets window...But, you cannot get it full screen.
    With iBooks Author, you either learn to use what is available within the app, or look online for third party widgets to purchase which suit your project.

  • How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?

    How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
    Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive.  I can't seem to get it to do this.

    This W7 was purchased for using Fusion, as others did - per reviews from amazon.  The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work.  Apparently my setup doesn't work. 
    Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
    BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years.  What do you use for email and calendar?
    Wow, sounds like another reason to not use MS Windows.
    Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
    As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times. 
    Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
    Switch 101
    Mac 101
    Find Out How Video tutorials

  • I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

  • My mac starts up in a white screen with a loading bar and a loading circle please help

    My mac starts up in a white screen with a loading bar and a loading circle please help

    I do hope you have recent backup, because it look like your hard disk is failing. You can start up in Recovery Mode, and run Disk Utility to see if the disk can be fixed:  OS X: About OS X Recovery - Apple Support

  • How to send a text message to a group of people and save the list for next time?

    how to send a text message to a group of people and save the list for next time from an iphone 4s?

    Hey there ipremacha,
    It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • HT4428 My 128 Gb iPad cannot do airplay mirroring with Apple TV 3.  It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button.  No airplay button when sliding the bottom opened apps to the right.

    My 128 Gb iPad cannot do airplay mirroring with Apple TV 3.  It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button.  No airplay button when sliding the bottom opened apps to the right!  Note : This problem persists after HDMI cable has been changed, and Apple TV was reset.  My another iPad 4 64Gb also on the same most updated ISO has no problem.  

    I restarted the iPad, it is okay now!  I think it is because I have been using the smart cover for too long, without shutting down the iPad completely!  It just works fine with the airplay signal appearing again after restarting the iPad.

  • HELP!!!! The screen on my mac mini has shrunk and I don't know how it happened and need to know how to change it back. It's really small print and it's hard for me to read.

    Please help!!! My compter screen has shrunk and the print is really hard to read. I don't know what I did to make this happen, but I'd really like to change it back to the larger size. Thanks for helping!

    Click on the Apple logo in the upper-left corner of your display.
    Click "System Preferences," then click "Displays."
    Click "Display" if it is not already selected.
    Select a resolution from the list of available resolutions. The most common screen resolution is 1280 by 1024 for standard screens and 1280 by 800 for wide screens as of February 2012
    Depending of the monitor you have.

  • Dreamweaver and PhoneGap: How to Edit the Application Manifest for an Android app

    I successfully created an Android app using dreamweaver cs6 and the PhoneGap build service.  I submitted the app and it is live in Google Play.  The only problem is that the app is requiring all kinds of permissions from users that are not necessary for the app.  The app requires Internet access, but it does not require access to the camera or the user's contacts, etc.  I understand that this information is held in the Application Manifest file, but I don't know where that file is.
    Can you help me figure out how to edit the Application Manifest file for my android app?
    Thanks,
    Michael

    To edit permissions, you do so in the config.xml file. After making changes, you can directly upload on build.phonegap.com or from within Dreamweaver.
    See this page for info on customizing config.xml: https://build.phonegap.com/docs/config-xml#features

  • HT2492 I am using Snow Leopard and the icon for dashboard was removed from the dock.  Does anyone knopw how to put it back?  I have searched Finder, Trash and the Applications folder but i can't find it.  It works when i press F4 so it must still be there

    I have searched Finder, Trash and the applications folder but i can't find where it is kept.  I want to put the icon for Dashboard back in the dock - how can i do this?

    The combo update may replace anything you have inadvertently deleted.
    Mac OS X 10.6.8 Update Combo v1.1
    You can reapply it over the top of any previously downloaded version.  I see that your profile says 10.6.8.
    Then software update to pick up any new security, iTunes updates.

  • HT6154 just upgraded my phone and am getting texts for another phone on my account . how do I fix this  .

    upgraded my phone and now I'm getting texts for another phone on my account . How do I fix this ?

    What does "upgraded my iPhone" mean?  Does it mean you purchased a new iPhone?  Does it mean upgraded iOS?
    If you purchased a new iPhone, was it previously owned?

  • My screen has a red line and flickers when on for very long.  What can I do?

    A thin red (sometimes blue) line appears horizontally half way up my screen.  When left on, the screen begins to flicker.  At that point I turn it off for fear that it will do more damage.  I have completely shut down and synced.  The problem is still there.  What can I do, short of sending it in for repairs?
    Is this a common problem?  Can it be fixed easily?  If it has happened to you, what did you do and how long did repairs take.
    BTW, this is an 8 GB 4th generation iPod Touch, purchased new through Apple last spring.

    To rule out a software problem try one at a time in order:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes on the computer
    - Restore the iPod to factoery defaults/new iPod
    If still problem, either make an appointment at the Genius Bar of an Apple store or call AppleCare (1-800-MY-APPLE) for warranty service.

  • My screen is now a black and white negative image - can I reverse it to col

    After 3 small children were near my computer - it was turned on , the screen is now black and white like a negative image, when starting up the initial checks of firewall etc are displayed on the normal colour screen then as soon as the start up is over it goes to Black and white. I have been through the settings on the computer but can not find any changes that have occured - I suspect the 3 toddlers have pressed everything at once
    Can anyone tell me how I can get the colour back?

    Open the Universal Access pane of System Preferences
    and turn off the White on Black option under Seeing,
    as well as any other options which may have been
    inadvertently turned on or changed, such as the
    contrast.
    (12735)
    Thank you very much - problem solved in 10 seconds flat
    Peter

  • Replaced iPhone5 and my photos haven't downloaded properly, they come up as a white screen with a loading icon. Been like this for 1 month now.

    Hi,
    My iPhone 5 was backed up on iCloud, when I got a replacement and went to back it up it seems to have left out my photos. When I try to look at my old photos they come up with a white screen and a loading icon. Does anyone know how I can fix this?
    Thanks

    Call Apple and asked to be transferred to "Customer Relations." Explain everything to them and the will take care of you. Make sure you have all your documents and case numbers when you call.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  120G Vertex 3 SSD Boot HD 

  • Sometimes my iMac starts with white lettering across the screen on a black ground and after switching off for a few seconds starts on ok ! Any ideas

    Sometimes my iMac starts up with white lettering acrossthe screen on a black background - when it's switched off for a few seconds it starts up ok. Can anyone tell me why this happens ?

    I have read on here that a PRAM reset can cure this problem:
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

Maybe you are looking for