How do I insert a wait in dialing string on WP7 Trophy

I was able to figure out how to insert a pause (its the comma) but I need to insert a wait, which is where it dials part of the number, hits the wait and after the prompt sends the part of the number after the wait. It looks like similar to the P for pause or W for wait on those other operating systems like RIM and Android.

Add more commas, each one is a specified time unit. More commas more time...,,,,

Similar Messages

How do I insert a WAIT or a PAUSE function, followed by a constant string of numbers [international code, country code and the destination phone number].

I'd like to program a LOCAL ACCESS NUMBER, then insert a WAIT or a PAUSE function, followed by a constant string of numbers [international code, country code and the destination phone number]. Dialing the local, US access number is not an issue, but I can't find any info in the manual on how to insert a WAIT or PAUSE or how to insert the remaining string of international codes and destination phone number. Any help would be appreciated. Thanks!

How to Add Pauses when you Dial a Number on the Samsung Galaxy Note 3 - For Dummies
It is also described on page 42 of your owners manual...

How do I disable call waiting when sending a FAX on a Photosmart C410a All-in-One?

When sending a FAX from my computer, I added *70 to the dialing prefix to disable Call Waiting. The problem appears to be that either my C410a does not recognize the * or perhaps I must add a pause after the *70. The user guide says to hit the up arrow to insert a pause but I think that might only work for FAXes that are dialed from the All-in-One, not the computer. In another place in the User Guide, it instructs to hit asterisk twice ** to get a pause. When dialing from the computer, if I hit ** I get ** not a pause. (I use Comcast and they do not give a new dial tone after hitting *70 so I don't think the pause is necessary.)
If I remove the *70 from the dialing sequence on the computer, the FAX goes right through but a Call Waiting signal might stop the FAX.
Anyone know how to include *70 for computer dialing?

Hello LCHutton, I hope you are well
I read your post about your attempts to disable call waiting when sending a fax. I would suggest looking in the fax menu on the printer and turning off the ECM (Error Correction Mode), and also changing the Fax Speed to slow.
I hope either of those steps help you!
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see what their options are for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Also, I have found this thread that is related to your scenario that might help you!
How do I disable call waiting
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do i insert a splash screen or a loading screen and a application image for a phone app on Dream

How do i insert a splash screen or a loading screen and a application image for a phone app on Dreamweaver 6, 5.5 had the mobile application setting that is seemingly no longer present? and i also heard you can use animanted backgrounds on the mobile application in dreamweaver 6 but figuring out how to set the splash screen and application image like it was in 5.5 would be nice. All i can get to pull up is the web application i developed i am trying to build into a phone app on google chrome, if i could officially designate it as a phone app where i can set each splash screen and app image to where it is recognized as a phone app that would be really nice.

Duely noted, the server will still not connect, so i have left an inquery in the suggested forum.
Date: Mon, 15 Oct 2012 07:37:34 -0600
From: [email protected]
To: [email protected]
Subject: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    Re: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    created by David_Powers in Developing server-side applications in Dreamweaver - View the full discussion
jmed0411 wrote: the phonegap program loads for quite some time and eventually reaches to the unfortunate conclusion that the server cannot be reached and to please try again. Any ideas on how that problem can be mended if the solution is in my hands?? I haven't used PhoneGap Build recently, but I have seen several reports about problems connecting to the server. One suggestion that I've heard is that there has been unexpectedly high demand on the server since the launch of Edge Tools and Services as part of the Creative Cloud last month. As far as I know, the only thing you can do is wait, and try again later. You could also try posting in the PhoneGap Build forum: http://community.phonegap.com/nitobi/products/nitobi_phonegap_build.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4774799#4774799
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4774799#4774799
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4774799#4774799. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Developing server-side applications in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can u insert and retrieve text files in any format using forms6i.

how can u insert and retrieve text files in any format using forms6i.
can u give me an example of an insert statement, let's assume the file is located in the a:drive.
and retrieving the files, i would give the user a list of all the files that are in the database, the user would select one, but what command(or piece of code) would open the file in its apppropriate editor.
e.g .pdf formatted file would open in acrobat.
any help would be appreciated.
Thanks
Hussein Saiger

the filereference class is for downloading and uploading files.
if you want to load xml, use the xml class.
and, if you want to write to an xml file and don't want to use server-side code, wait.

Is there a way to set up a 'dial string' with a 'wait' function?

I'm trying to set up calling my work voicemail. On the blackberry i could set up a dial string with a wait function. So when i dialed the voicemail #, once it answered I could hit a button on the phone and it would send the next set of characters (in this case, my extension #), then wait again, and once I got my password prompt, i could again send the next characters (now my password). I can find the way to put in a pause...but it isn't enough and doesn't do what i want it to do. How can i do this on my iPhone?
It really is important in that i don't want to have to enter these characters while i'm driving.

Thanks for the reply....i've tried that and it's not doing what i want it to. Our VM sometimes has delays, so its impossible to predict home many pauses i need....really need a wait function.
Thanks

How do I insert an image into a quetsion (post)

What are Mozilla code-structure in new posts.?
How do I insert an image into a new post?
Thank you

cor-el said
If the image is on another server then we prefer to have a link instead of the real image in case it is a large image and we've already seen it or do not want to wait for it to load (server may be slow).
I do not know what any of this means.
I have a single laptop connected to the internet.
So far I have worked out how to upload an image to a thread-reply by copying the uploaded file "path" and pasting it onto the reply
and then after the reply is posted there are two incidence of each image
1. the URL
2. the image at the bottom of the reply
I am a newbie so would appreciate any feedback
(Firefox window controls have disappeared (Clean installed v18 5 days ago). Have logged another thread/reply on this forum)
Thanks

How do you insert an electronically signed report as an appendix into a main report which will be signed electronically at a later date?

How do you insert an electronically signed report as an appendix into a main report which will be signed electronically at a later date?

You can add it as a file attachment. Exactly how you do this depends on the version of Acrobat you're using, but if you open the Attachments panel, you should see where you can add a file.

How do I insert my Edge Animation into Wordpress as an animated/interactive graphic

How do I insert my Edge Animation into Wordpress as an animated/interactive graphic?

Hi ColleenSyron,
Can you check out this video: http://tv.adobe.com/watch/create-like-crazy-with-adobe-edge/episode-5-spice-up-your-wordpr ess-site-with-edge-animate/
Thanks,
Preran

How do you insert live web pages in keynote?

How do you insert live web pages in keynote?

Insert a 2D Pie chart on the slide (Insert > Chart > 2D Pie), then place a circle from Shapes overlaid in the centre:

How can I insert values from table object into a regular table

I have a table named "ITEM", an object "T_ITEM_OBJ", a table object "ITEM_TBL" and a stored procedure as below.
CREATE TABLE ITEM
ITEMID VARCHAR2(10) NOT NULL,
PRODUCTID VARCHAR2(10) NOT NULL,
LISTPRICE NUMBER(10,2),
UNITCOST NUMBER(10,2),
SUPPLIER INTEGER,
STATUS VARCHAR2(2),
ATTR1 VARCHAR2(80),
ATTR2 VARCHAR2(80),
ATTR3 VARCHAR2(80),
ATTR4 VARCHAR2(80),
ATTR5 VARCHAR2(80)
TYPE T_ITEM_OBJ AS OBJECT
ITEMID VARCHAR2(10),
PRODUCTID VARCHAR2(10),
LISTPRICE NUMBER(10,2),
UNITCOST NUMBER(10,2),
SUPPLIER INTEGER,
STATUS VARCHAR2(2),
ATTR1 VARCHAR2(80),
ATTR2 VARCHAR2(80),
ATTR3 VARCHAR2(80),
ATTR4 VARCHAR2(80),
ATTR5 VARCHAR2(80)
TYPE ITEM_TBL AS TABLE OF T_ITEM_OBJ;
PROCEDURE InsertItemByObj(p_item_tbl IN ITEM_TBL, p_Count OUT PLS_INTEGER);
When I pass values from my java code through JDBC to this store procedure, how can I insert values from the "p_item_tbl" table object into ITEM table?
In the stored procedure, I wrote the code as below but it doesn't work at all even I can see values if I use something like p_item_tbl(1).itemid. How can I fix the problem?
INSERT INTO ITEM
ITEMID,
PRODUCTID,
LISTPRICE,
UNITCOST,
STATUS,
SUPPLIER,
ATTR1
) SELECT ITEMID, PRODUCTID, LISTPRICE,
UNITCOST, STATUS, SUPPLIER, ATTR1
FROM TABLE( CAST(p_item_tbl AS ITEM_TBL) ) it
WHERE it.ITEMID != NULL;
COMMIT;
Also, how can I count the number of objects in the table object p_item_tbl? and how can I use whole-loop or for-loop to retrieve values from the table object?
Thanks.

Sigh. I answered this in your other How can I convert table object into table record format?.
Please do not open multiple threads. It just confuses people and makes the trreads hard to follow. Also, please remember we are not Oracle employees, we are all volunteers here. We answer questions if we can, when we can. There is no SLA so please be patient.
Thank you for your future co-operation.
Cheers, APC

How can I insert data into the standard CRM tables ?

Hi Experts,
Scenario----
I need to download few attributes (fields) from SAP MDM to SAP CRM via SAP XI. I'm using the 'COMT_PRODUCT_MAINTAIN_API' API for it.
The attributes(fields) that are present in the strucutres of API are downloaded into CRM system (by executing the Inbound proxy that is created based on the Message Interface created on XI) by calling the functions present in the API.
And for those fields that are not present in CRM, but need to be downloaded into CRM, I'm creating the Set Type attributes in CRM, which get appended to the API.
My query is:
There are fields in CRM into which I need to insert the values. But they are not listed in the API. So, how can I insert(/download) the values into these standard fields?
Regret the long description. Intended to be clear.
TIA. Points will be awarded.
Regards,
Kris
Edited by: Kris on Jul 21, 2008 8:00 AM

he INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj

How can I Insert data into my msaccess Database table

Hello all,
I am new to Java programming and I have problem that how can i insert name into my database table.
The code which i have written is following:
String filename = "d:/test.mdb";
String database = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
database+= filename.trim() + ";DriverID=22;READONLY=true}";
Connection con = DriverManager.getConnection(database,"","");
String s = String.valueOf(text.getText());
int k =10;
Statement st = con.createStatement();
st.execute("create table Test123(name text)");
st.execute("INSERT INTO Test123 values" +s);
on the INSERT program throws exception???
can any one help me how to insert data into tabel.
Thanks

he INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj

In ADF how can i insert data in multiple table if they have foreign key

I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
Thnak you very much.

Hello,
Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
3> i made that association composite by clicking the checkbox
4> i created 2 VO from 2 EO.
5> put those VO in Application Module.
6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
Now what to do please?

How can I insert text in a photo?

How can I insert text onto a photo? Before Lion used Command T. Have not installed Page or Numbers. Have Microsoft for Mac.

Open the photo with Preview and select ⌃⌘T.
(Also, take a look at: Skitch)

How do I insert a wait in dialing string on WP7 Trophy

Similar Messages

Maybe you are looking for