How do I insert table in a e-mail ?
How do I insert a table in a e-mail please ?
Not easily, since that would require an HTML email, which Apple Mail doesn't support.
To be more precise, Mail doesn't support editing HTML e-mail. It does support HTML e-mail, but in order to create it, you must use some other program, preview the HTML in Safari, and then (in Safari) choose File -> Mail Contents Of This Page. And if the recipient uses a mail client that doesn't do HTML very well (like Outlook), they may or may not see what you want them to.
Similar Messages
-
How do I insert an image in G-mail using firefox 6.0.1??
I am using g-mail in firefox browser 6.0.1. My operating system is win 7 64-bit. Question: how do I insert an image in g-mail??
Nevermind figured it all out once I walked away!
-
how can i insert a file in a mail message i send to someone? i don't want the picture to be open or the text to be displayed. I want to send the file as a file. Pleas advise. thank you.
Attach it to the message. An attachment is an attachment -- if it is displayed or not by the recipient's e-mail client is not under your control.
You can zip it (compress it) before sending it; if it's text, you should zip it anyway; if it's JPEG, zipping will not reduce the size (in fact, it's even possible it may increase it slightly), but most e-mail clients do not display what's inside a zip archive. -
How to Convert internal table data into text output and send mail in ABAP
Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VThere's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
* -------- create persistent send request ------------------------
gv_send_request = cl_bcs=>create_persistent( ).
* -------- create and set document -------------------------------
* create text to be sent
wa_line = text-001.
APPEND wa_line TO gt_text.
CLEAR wa_line.
APPEND wa_line TO gt_text.
LOOP AT gt_fail ASSIGNING <fs_fail>.
MOVE <fs_fail>-retry_count TO gv_count.
CONCATENATE text-002
<fs_fail>-setting_id
text-003
gv_count
INTO wa_line SEPARATED BY space.
APPEND wa_line TO gt_text.
CLEAR wa_line.
ENDLOOP.
APPEND wa_line TO gt_text.
wa_line = text-007.
APPEND wa_line TO gt_text.
* create actual document
gv_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = gt_text
i_length = '12'
i_subject = 'Failed Precalculation Settings!' ).
* add document to send request
CALL METHOD gv_send_request->set_document( gv_document ).
* --------- set sender -------------------------------------------
gv_sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD gv_send_request->set_sender
EXPORTING
i_sender = gv_sender.
* --------- add recipient (e-mail address) -----------------------
LOOP AT s_email INTO wa_email.
MOVE wa_email-low TO gv_email.
gv_recipient = cl_cam_address_bcs=>create_internet_address(
gv_email ).
CALL METHOD gv_send_request->add_recipient
EXPORTING
i_recipient = gv_recipient
i_express = 'X'.
ENDLOOP.
* ---------- set to send immediately -----------------------------
CALL METHOD gv_send_request->set_send_immediately( 'X' ).
* ---------- send document ---------------------------------------
CALL METHOD gv_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = gv_sent_to_all ).
IF gv_sent_to_all = 'X'.
WRITE text-004.
ENDIF.
COMMIT WORK.
* exception handling
CATCH cx_bcs INTO gv_bcs_exception.
WRITE: text-005.
WRITE: text-006, gv_bcs_exception->error_type.
EXIT.
ENDTRY.
with the following declarations
* TABLES *
TABLES:
adr6,
rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS *
DATA:
gt_fail TYPE SORTED TABLE OF rsr_prec_sett
WITH UNIQUE KEY setting_id run_date,
gt_text TYPE bcsy_text,
wa_fail LIKE LINE OF gt_fail,
wa_line(90) TYPE c.
FIELD-SYMBOLS:
<fs_fail> LIKE LINE OF gt_fail.
* VARIABLES *
DATA:
gv_count(4) TYPE n,
gv_send_request TYPE REF TO cl_bcs,
gv_document TYPE REF TO cl_document_bcs,
gv_sender TYPE REF TO cl_sapuser_bcs,
gv_recipient TYPE REF TO if_recipient_bcs,
gv_email TYPE adr6-smtp_addr,
gv_bcs_exception TYPE REF TO cx_bcs,
gv_sent_to_all TYPE os_boolean.
* SELECTION-SCREEN *
SELECT-OPTIONS:
s_email FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
wa_email LIKE LINE OF s_email. -
I do I insert a hyperlink in e-mail. Insert feature does not seem to work.
How do I insert a hyperlink in e-mail? Insert feature does no seem to work.
== This happened ==
Every time Firefox opened
== the beginningThe text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142 -
How can I insert values from table object into a regular table
I have a table named "ITEM", an object "T_ITEM_OBJ", a table object "ITEM_TBL" and a stored procedure as below.
CREATE TABLE ITEM
ITEMID VARCHAR2(10) NOT NULL,
PRODUCTID VARCHAR2(10) NOT NULL,
LISTPRICE NUMBER(10,2),
UNITCOST NUMBER(10,2),
SUPPLIER INTEGER,
STATUS VARCHAR2(2),
ATTR1 VARCHAR2(80),
ATTR2 VARCHAR2(80),
ATTR3 VARCHAR2(80),
ATTR4 VARCHAR2(80),
ATTR5 VARCHAR2(80)
TYPE T_ITEM_OBJ AS OBJECT
ITEMID VARCHAR2(10),
PRODUCTID VARCHAR2(10),
LISTPRICE NUMBER(10,2),
UNITCOST NUMBER(10,2),
SUPPLIER INTEGER,
STATUS VARCHAR2(2),
ATTR1 VARCHAR2(80),
ATTR2 VARCHAR2(80),
ATTR3 VARCHAR2(80),
ATTR4 VARCHAR2(80),
ATTR5 VARCHAR2(80)
TYPE ITEM_TBL AS TABLE OF T_ITEM_OBJ;
PROCEDURE InsertItemByObj(p_item_tbl IN ITEM_TBL, p_Count OUT PLS_INTEGER);
When I pass values from my java code through JDBC to this store procedure, how can I insert values from the "p_item_tbl" table object into ITEM table?
In the stored procedure, I wrote the code as below but it doesn't work at all even I can see values if I use something like p_item_tbl(1).itemid. How can I fix the problem?
INSERT INTO ITEM
ITEMID,
PRODUCTID,
LISTPRICE,
UNITCOST,
STATUS,
SUPPLIER,
ATTR1
) SELECT ITEMID, PRODUCTID, LISTPRICE,
UNITCOST, STATUS, SUPPLIER, ATTR1
FROM TABLE( CAST(p_item_tbl AS ITEM_TBL) ) it
WHERE it.ITEMID != NULL;
COMMIT;
Also, how can I count the number of objects in the table object p_item_tbl? and how can I use whole-loop or for-loop to retrieve values from the table object?
Thanks.Sigh. I answered this in your other How can I convert table object into table record format?.
Please do not open multiple threads. It just confuses people and makes the trreads hard to follow. Also, please remember we are not Oracle employees, we are all volunteers here. We answer questions if we can, when we can. There is no SLA so please be patient.
Thank you for your future co-operation.
Cheers, APC -
How can I Insert data into my msaccess Database table
Hello all,
I am new to Java programming and I have problem that how can i insert name into my database table.
The code which i have written is following:
String filename = "d:/test.mdb";
String database = "jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=";
database+= filename.trim() + ";DriverID=22;READONLY=true}";
Connection con = DriverManager.getConnection(database,"","");
String s = String.valueOf(text.getText());
int k =10;
Statement st = con.createStatement();
st.execute("create table Test123(name text)");
st.execute("INSERT INTO Test123 values" +s);
on the INSERT program throws exception???
can any one help me how to insert data into tabel.
Thankshe INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj -
In ADF how can i insert data in multiple table if they have foreign key
I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
Thnak you very much.Hello,
Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
3> i made that association composite by clicking the checkbox
4> i created 2 VO from 2 EO.
5> put those VO in Application Module.
6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
Now what to do please? -
How-To "Refresh a table of data after inserting or deleting"
I'd like to say a word on the how-to article "How to refresh a table of data after inserting or deleting a row using ADF".
(http://www.oracle.com/technology/products/jdev/howtos/1013/updtable/index.html?_template=/ocom/technology/content/print)
I spent a lot of time on it because I needed help in implementing simple CRUD functionality on a table, using JSF-ADF-TopLink technologies.
While the the article does provide correct steps, it is in one important place not specific enough, so the reader may easily get stuck. In section "Refresh the data table", point 1: when you double click on the removeEntity() button, in Structure window, then you do not get the required dialog. You get CommandButton Properties dialog.
You must click on the removeEntity() button in Editor's Design view. But even there you may get the CommandButton Properties dialog, not managed beans dialog.
You may resolve that by going to JSF configuration file, faces-config.xml, and switch to Overview view. This will show you the managed beans that you have.
Then, you may already have a backing bean for the page. You can use that and avoid creating a new managed bean.
I could understand what the operations mean only after very careful reading of "Creating More Complex Pages", section "Overriding Declarative Methods" in JDeveloper Help (or in ADF Developer's Guide PDF document).
In general: I believe that "ADF bindings" need more conceptual explanation, maybe in form of an article. Grammatical form "bindings" may create a false understanding that "bindings" are just references. But they are not -- ADF bindings are active objects that handle traffic between UI components and Data Controls. It seems that "bindings" even communicate among themselves. Maybe it would be more understandable to differentiate strictly between "binding objects" (or "binders"?), binding object definitions and binding object references.
It would be very helpful to have a diagram showing grahically what specific binder objects are created in a small apllication (2-3 pages using 1-2 tables), with whom they communicate and what type of data is passed on.
PriitHi
Thanks for your infos.
Yes exactly I use almost the same code you have post here.
Could You answer to my next questions?
First - >what do you mean by saying that "it's not good idea using refreshing in IE?" Of course I use refreshing in backing_bean for my button "remove" that removes row, commit changes to database and refresh table, almost the same as You said in your post:
Code in backing_bean is and comments on difference to Your code is below:
public commandButton2_action1(){
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("removeEntity");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
//above remove entity, but I dont now if it do commit to database? So i do it below
OperationBinding commit1 = bindings.getOperationBinding("Commit");
commit1.execute();
//and at the end I refresh my table, "findAllRezerwacja1 - it is an id of the methodAction, not the iterator -> is it ok? or should I change to Iterator id?
OperationBinding requery = bindings.getOperationBinding("findAllRezerwacja1");
requery.execute();
return null;
Page Definition code for this:
<methodAction id="findAllRezerwacja1"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="findAllRezerwacja"
RequiresUpdateModel="true" Action="999"
ReturnName="SessionEJBLocal.methodResults.SessionEJBLocal_dataProvider_findAllRezerwacja_result"/>
<table id="findAllRezerwacja2" IterBinding="findAllRezerwacja1Iter">
<AttrNames>
<Item Value="dataDo"/>
<Item Value="dataOd"/>
<Item Value="idRezerwacja"/>
<Item Value="liczbaUczestnikow"/>
<Item Value="prowadzacy"/>
<Item Value="uwagi"/>
</AttrNames>
</table>
<methodAction id="removeEntity" InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="removeEntity"
RequiresUpdateModel="true" Action="999">
<NamedData NDName="entity"
NDValue="${bindings.findAllRezerwacja2.currentRow.dataProvider}"
NDType="java.lang.Object"/>
</methodAction>
<action id="Commit" IterBinding="findAllRezerwacja1Iter"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" RequiresUpdateModel="true"
Action="2"/>
</bindings>
//and rest of code for Iterator etc
My second question is, why when you use refresh button in IE (I know is not recommended as You said, but sometimes user do it, so I want prevent situations that I will describe here) so when I press refresh button in IE exactly after removing one row by clicking my button, refreshing by pressing IE button is doing the same --> is deleting next row. How to stop deleting row, when for example user would press IE refresh button after pressing remove button for table. If I change selection in table after deleting row, and press refresh button in IE, instead of deleting row, I got error message: JBO-29000: JBO-35007: and
JBO-35007. So where Im doing wrong. Maybe I should do sth with postback ? Could You help me? Thanks in advance
Last one question: what is the difference between using delete and removeEntity from operations node? Im now reading carefully ADF Dev Guide, so I hope I can find infos there? But if You know, please answer to this question.
Thanks -
How to create a table with datatype blob and insert a pdf file (ravi)
how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you. -
How to change settings for insert table
I use DW CS4. Don't know how this changed but now when i click insert>table the result is insertion of a table with width of 960 and 8 columns and 8 rows?
Where can i change this back to what it was so that in properties i can set the width, the number of columns, the number of rows, etc.
thanks for your help,
Jim BalthropJBWebWorks wrote:
I use DW CS4. Don't know how this changed but now when i click insert>table the result is insertion of a table with width of 960 and 8 columns and 8 rows?
Where can i change this back to what it was so that in properties i can set the width, the number of columns, the number of rows, etc.
Dreamweaver should remember the last table definition you put on the page.
Insert>table>Specify Rows/Columns/Width
That should then be the default until you specify something else. -
How to get value in function insert table test ?
Hi
I use function insert table test in order to get value in table for use in code page but i don't know how to get value in table.If somebody have any idea.Please give me some advice.
Thank you,
WarujaYou will need to grab the contents with VBA
Table test is user interface only.
This thread may help
http://qazone.empirix.com/thread.jspa?threadID=748&tstart=0 -
How can I insert a table in the header?
The question is easy: How can I insert a table of one row in the header.
Thanks in advance.
Jesús.There are multiple versions of Pages in circulation on Mavericks and Yosemite. Telling us which one helps with a more accurate answer.
If you are referring to Pages v5, then you cannot insert a table into the header or footer, because implicitly, these are table cells too. The discontinued Pages ’09 v4.3 would allow table insertion in the document header/footer fields. -
How do i insert into temp table
Hi ALL,
I have a table APP
APP_I Acronym Desc
1 ACC Accounts
PLTFRM
swr_pltfrm_i swr_pltfrm_x swr_pltfrm_typ_x
1 AIX-JAVA Execution
2 COBOL/BATCH Execution
3 COBOL/CICS Execution
4 CONSULTWORKS/MOBILE Delivery
5 CONSULTWORKS Delivery
PLTFRM_APP_ENVT
swr_pltfrm_i app_i
1 1
2 1
3 1
4 1
5 1
I want to create one temporary tab
TEMP_insert(app_i,desc, acrnymc ,delivery,execution) which have this columns
App_i desc acrnymc execution
1 Accounts ACC AIX-JAVA,COBOL/BATCH,COBOL/CICS
delivery
CONSULTWORKS,CONSULTWORKS/MOBILE
How do i insert the row in to the Temp_Insert table based on APP_I as input to my stored procedure.
Thankshopefully this will help
dev>declare
2 cursor c is select empno,ename,job from emp where deptno=20 and rownum<3;
3 str varchar2(100);
4 begin
5 for cur in c loop
6 str:=str||' '||cur.ename||' '||cur.job;
7 end loop;
8 insert into emp_test (ename) VALUES(str);
9 end;
10 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
dev>select ename from emp_test;
ENAME
SMITH CLERK JONES MANAGER
[pre -
How can I insert/move a table cell in Pages?
I'm making labels for tab dividers (specifically, for dividers in comic book boxes) and I'm trying to figure out how I can insert an empty cell in the table. Or move the other cells over/down and have them "wrap" from the end of the row to the beginning of the next row if neccessary. Can this be done?
KonKrypton wrote:
Jerrold, I can do that, but I was hoping for a way to "scootch over" the cells so I can keep them in order. That would require me to cut and paste every cell from the target cell to the end of the document (or page). I have a feeling that what I'm looking for doesn't exist.
Thanks, I appreciate the idea.
Kon,
It would be easy to move a group of rows, but there's no way to get it to snake down or up. This is a 2-D array, not not a linear array that has been meandered into a rectangle. You could write an expression to do this, but it would take several steps, and would involve a second table. You could also write an Applescript to do what you want. All of this seems a lot of work for what, as Peter notes, seems a rather simple result.
Jerry
Maybe you are looking for
-
Power Mac G5 upgrade question.
Does anybody know if the G5 can be transformed into an Intel system in order to upgrade to Lion? I really don't want to have to buy a new Mac.
-
Get Realm Jdeveloper Soa 11g PS3
Hi I've a problem with jdeveloper authentication with a Oracle SOA 11g PS3. I've successfully installed the DemoSeed Community into the server, i've checked into "secutiry realm->myrealm->users and groups" and i found all the seed users. During the d
-
Tweaking defaults of Discoverer 10g (Viewer and Plus) login page
Using information gleaned from the Metalink notes referenced below, we've had our admins successfully configure our default Discoverer 10g login pages (for Viewer and Plus) with the following tweaks: 1) Remove the "typo-prone" entry box for RESPONSIB
-
How to open image in PhotoShopCC2014 from Yosemite Photo?
From iPhoto I was able to drag and drop images to PhotoShop icon in the dock to open the image. This does not appear to work when I upgraded to Yosemite which provides Photo to replace iPhoto. Is there a way to do this without going to the PhotoLib
-
Can't save as in numbers 3.1
Just got a new Mac with mavericks but numbers 3.1 and pages dont have an save as option in the file menu, any advice