How do I install a Canon MG6450 printer on my MacBook Pro?

I can't find drivers for this printer. Any suggestions?

You have to buy an external Blue-ray player.
Check this site out. Click on the "CD/DVD/Blue-ray tab.
http://eshop.macsales.com/
Hope this helps.

Similar Messages

How can I install Windows 8.1 Enterprise on my Macbook Pro With BootCamp?

How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

Hi Armin.S,
I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Mac Basics: Using Windows on your Mac with Boot Camp
http://support.apple.com/kb/HT1461
Apple - Boot Camp Support
https://www.apple.com/support/bootcamp/
Regards,
- Brenden

How do I install CS5 from CDs into my new MacBook Pro?

How do I install CS5 from CDs into my new MacBook Pro?

Buy a cheap external DVD drive, connect via USB and then install
Download CS5 Trial version from http://prodesigntools.com/all-adobe-cs5-direct-download-links.html then activate with your CS5 serial number to convert to a permanent version

Canon Pixma Printing from a Macbook Pro using Windows XP Home machine

Using my windows xp home machine as a print server. I have a Canon MP480 printer
Installed bonjour on the xp machine.
Installed the printer and drivers.
Shared the printer on XP.
Installed the driver on the MacbookPro.
Added the printer using Windows print sharing.
Prints to XP machine so that the print job shows up in the queue on the windows machine.
Printer starts to get ready to print.
It never prints.
This is a common printer because they give it away at the Mac store when you buy a new Macbookpro.

Hello and welcome to Apple Discussions.
Usually when you select to add a Windows shared printer (Add Printer > Windows) you get prompted to enter the Windows user name and password. After entering this information you will then see the printer share name. If you are not getting prompted for account information after selecting the sharing computer then your Mac may have cached or saved a previous account used on Windows. Since you mention Guest for a previous attempt, maybe this is being used by the Mac and if that is now disabled on Windows then this could be a cause. So check your Windows accounts to see if the Guest account is still enabled.
The other thing that you can do is open Keychain Access on the Mac and look at the 'login' keychains. Your details for the connection to the PC could be saved here so you could delete this entry and then try adding the Windows printer share on the Mac again.
Once you do manage to see the printer share there is another matter that you need to be aware of. For some printers, the vendor created printer driver does not work when connecting to a Windows shared printer. For these types of connections you need to use either the Gutenprint or PrintFab driver suite.
Gutenprint is preferred because it is free a version is included with Mac OS X 10.6. The one major issue with Gutenprint is that very new models of printers are often not included with the latest release. In this scenario it is necessary to try to find a compatible model for the respective vendor, but this can use a large amount of ink and paper before achieving a successful result.
So this can force you to use [PrintFab|http://www.printfab.net] and the creators do a very good job of keeping up with new model releases. There is a cost involved with the software (€49) but there is a 30 day trial so you can at least test that it works.

How do I install windows 7 drivers correctly on my macbook pro retina?

I've installed Windows 7 Ultimate (64 bit) twice now, and each time I get on, none of the bootcamp drivers seem to be installed correctly. This means I can't access the internet because a network adapter isn't present, and I can't play games because the NVIDIA drivers aren't there. I've seen other people have had this problem in the past, but their fix was to download bootcamp 3.x from Apple's download site, but obviously that doesn't work now as the version is newer.
Does anyone know how to correctly install Windows so this doesn't happen, or how to get the drivers installed correctly?
Thank you very much for your time

For 2 reasons, and they are about the hardware.
1) Apple/Mac and BC restrict the way you use the computer. Maybe not for you but for me. It does not allow you to create any other parttitions for Windows to use. You can't even re-partition the BC partition into 2 drives. That will HOSE the Windows system and maybe the OS X part.
2) Apple/Mac does not allow the use of all the hardware. You can not use both graphic cards. switch between them. Windows Must use the descrete graphics adapter which cause the system to run hotter. This is a limitation imposed by Apple as with Reall Windows PCs that have both the Interl embedded and add-on descrete graphics you can switch between them.
Actually BC 4 has been out since Lion shipped on new Mac's. BC 4 also restricted the installation of Windows to just Win 7, no more XP. Which was what you could do with Snow Leopard and BC 3
Message was edited by: Shootist007

How can I install epson stylus nx625 driver on my Macbook Pro?

I've spent a frustrating few hours today going back and forth between Apple tech support and Epson tech support and still do not have a solution to what should be a simple problem. I got a new MacBook Pro as a work computer and want to install my home printer on it so that I can print when working from home. The printer is an Epson Stylus NX 625 all in one.
The directions on Epson's website indicate that the only way to install is use the "Software Update" function by going to the Apple icon on the upper left corner. When doing this, the system looks for an update and finds nothing. Printer is connected to the MacBook via usb cable and is also on my wireless network. I called Apple tech support and they said they don't have a driver for this Epson device and I should contact Epson. I called Epson tech support and they say that they don't even have the driver for this device on their website because "Apple has signed off on ownership of this driver and only they can deliver this to you via their software update". Can anyone help?
I am running Mountain Lion, OS X 10.8.1
Thanks for any assistance provided.

Patrickdom wrote:
The directions on Epson's website indicate that the only way to install is use the "Software Update" function by going to the Apple icon on the upper left corner.
I am running Mountain Lion, OS X 10.8.1
Thanks for any assistance provided.
Epson Stylus NX 625 drivers for Mountain Lion.

Problems installing HP LaserJet 1018 printer on new MacBook Pro

Hi all,
I just entered the wonderful world of Mac and I am really enjoying it. Too bad I waited so long. However, I have a problem installing my printer, an HP LaserJet 1018 printer, on my new MacBook Pro intel based computer. I checked at HP's website and it says that the printer is not supported for the Mac environment. Could there be other possibilities with drivers to download or should I buy a new printer?
Looking forward to hearing from you.
Best regards,
Christian
MacBook Pro 15", Intel based Mac OS X (10.4)

Hi Crelle,
When the manufacturer says they don't support something, it's generally best to stay away from it.
There's almost always 3 ways to do any 1 thing, but you may need you printer to do more than 1 thing and therefore you're going to have issues with all the other things.
Printing to a printer sounds like 1 thing, but it's not.
It's many things working together to get ink on paper.
My advise is get a supported printer and live without a headache.

How do I install Samba 3.4.6 on my MacBook Pro?

I'm having many odd problems associated with using Samba at work (where PCs and linux boxes rule & Macs are shunned). I hear the samba version that ships with the latest OS X (I have a 17" MacBook Pro running 10.6.2) is kind of out of date and was hoping to install the latest Samba version 3.4.6 available via:
http://www.macupdate.com/info.php/id/16066/samba
http://us1.samba.org/samba/
However, despite someone advising me (in a MacUpdate forum post) to use MacPorts and Porticus along with the implication that would 'just work', I can't for the life of me figure out how to install the latest version into my Mac. There is an installer for most other platforms, just not for the Mac.
Is there some kind soul out there who can help me please?

Mick_M wrote:
Thanks - I'll try my luck in the Windows forum. I just figured I was in much the same sort of domain as with Apple's X11 i.e. the X11 that shipped with snow leopard was very rough around the edges and the latest xquartz release (http://xquartz.macosforge.org/trac/wiki/Releases) runs rings around Apple's version and it comes with an installer that replaces Apple's X11.
What is "run rings around"? I use X11 every day and it works fine. X11 is one of those things that is easily misconfigured and poorly understand. People like to replace it hoping that the "new" version will replace the "buggy" version that Apple ships with the OS.
But while I'm here, I may as well state the most irritating issue I have with Samba. If I connect to my own linux box via samba in the Finder then I can certainly see and edit all my files etc. However, if I select a file and do cmd-D for copy or do a cmd-N to create a new folder then I get messages saying that there is no disk space left. That is simply not true, and I can get around these limitations by e.g. editing a file a want to duplicate and doing a save-as in the same directory. The new file is created without any complaints about the disk being full.
That sounds like a misconfiguration on the Linux side. Most users of 10.6.2 have no problem duplicating files and/or creating new folders.

How can I install software of a CD on my MacBook Pro 13' ?

I have bought software (SPSS, adobe, office) to install on my Macbrook Pro 13'.
However, the software has been delivered in CD format.
How can I install this software on my macbook?
Do I have to copy the CD to a USB?
Already thanks for your tips!
Fleur

Fleur,
you could borrow or buy an external CD/DVD drive with a USB connector to install the software from your CD to your MacBook Pro.

How do I install/upgrade iWork 2005 on my new MacBook Pro / Mountain Lion?

I just bought a new MacBook Pro (converted back from Windows) and installed an old version of iWork (2005) I purchased years ago, hoping to upgrade it. It didn't install properly as it only shows a folder in Finder/Apps, with a couple of docs in the folder and doesn't show up as an app for Upgrade. The guy that upgraded my MacBook Pro to Mountain Lion at the Apple Store told me this should work.
1) How do I install iWork 2005 on my MacBook Pro / Mountain Lion?
2) How do I upgrade it without having to purchase a new copy?
Thanks!

You cannot link any version of iWork installed from a retail disk or trial to the Mac App Store.
You install iWork '05 on your new Mac just as you always have, making sure you have the serial number to enter. But the iWork apps are very reasonably priced on the Mac App Store & have come a very long way in 7 years. And now Numbers is available for spreadsheets.

How do I install Adobe Photoshop Elements 12 on new MacBook Pro without DVD drive?

I just purchased my first MacBook Pro and am trying to get everything set up and installed. I purchased Adobe Photoshop Elements 12 and retrieved my serial number and have the redemption code -- but I can't figure out how to install Photoshop without a DVD drive. The Photoshop package I purchased only provides DVDs and I don't have a DVD drive. Is there a website I can go to to install Photoshop and enter my serial number or redemption code?

Have you tried downloading the trial version and using your serial
number to activate it?
The trial version is a complete product and can be activated by
inserting the valid serial number.
Good luck.

How do I install The Sims 3 on my new macbook pro?

I jsut got my MacBook Pro and im still learning how to run everything but i cant figure out how to install my Sims 3 game. I put it in and it acts like it is going to bring up an installer window like my old Dell used to do but then it stops and nothing happens. Where do i need to go to download the game?

Go to the top menu bar where it says Finder (if it doesnt, click anywhere on your desktop and it should show up)
Click on "Finder" Go to "Preferences", then under the "General" tab where it sais "Show these items in the desktop" make sure the option "CDs, DVDs and Ipods" is checked.
Close that window and reinsert the game disc.
It should show up on your desktop, a CD icon, just click on that icon.

How can I install my CS2 upgrade to my new macbook pro?

Help! I have a new Macbook pro and an old upgrade of CS2 photoshop (upgraded from Photoshop 6). I bought these two for a PC and was told in the Mac shop that I could run them on my fancy new machine..........apparently not, it won't install classic photoshop 6 as presumably it's too old. I also have CS2 Indesign but can't find the install button to press for that either......Am I screwed? I can't afford new programmes.

CS2 is the oldest version that can be upgraded to CS5. You may want to do that now before you lose the opportunity when CS6 comes out. You can upgrade and crossgrade to CS5 for Mac.
Another thought...
I run CS2 for Windows on Linux through Wine. It works fine. You could probably install Wine on Mac and do the same.
The salespeople might have been referring to running your Windows software on Mac with a virtual machine... with the help of such apps as VMWare Fusion or Parallels. These let you run Windows on top of Mac OS X without rebooting into a Windows partition. See the marketing line: "It Runs Windows Too".

How do I install creative suite already bought onto my macbook pro with no disk drive?

HI. I have creative suite 6 on my imac. The licence is for 3 computers. How do I download it onto my new macbook pro that has no disc drive?
Help? Cheers

You have a disk drive on your MacBook Pro. You may not have a DVD or CD drive.
You download Creative Suite 6 from this link (look at the bottom of the page):
Download and Installation Help

HT3986 how do i install blutooth driver for windows 7 in macbook pro

i m unable to install bluetooth drivers for windows 7 ultimate in macbook pro a1278.
pls. send me link or guide me.

Why isn't the files you put on USB that you downloaded from Boot Camp Assistant not working? That IS where you get drivers.
You are talking to users not Apple.
And everything is in BCA anyway or go to Boot Camp Support (apple support bootcamp web page).

How do I install a Canon MG6450 printer on my MacBook Pro?

Similar Messages

Maybe you are looking for