How do I install a fresh copy of WinXP SP on Protege 2000

I have this P2000 since a month, which has a running version of Windows XP Professional. As it had encountered problems and frequent crashes and delayed reboot and gotten to become slow to a point where booting it up to see the windows desktop seems like an achievement.
I took the necessary back up, and now am planning to install a fresh copy. I burned a Bootable CD containing to set up files and tried booting the P2000 with an USB-CD/DVDROM. I even changed the bios setting to boot from the CD-ROM, and yet it fails to boot. It says some error.
My HDD is MK2003GAH 1.8 inch.
The CD-RW/DVD Drive is H.L Data Storage Model No. GCC-4241N TYPE GYGO REV. SO FW:OP34
Intel(R) Boot Agent Version 4.0.10
Copyright(C
PXE-E61: Media test failure, Check Cable
PXE-MOF: Existing Intel PXE ROM.
and proceeds to load windows XP for more than 25 minutes and restarts again.
Yes, I read through a couple of threads on how one could use a PCMCIA and all. But I am clueless. Please Help.
Thank you.
Samir

the problem is :
1 : the bios of your portege only recognizes a few CDrom devices
2 : the installation procedure of Windows XP doesn't know how to cope with the external CDrom devices
the only way is to go back to a DOS environment ( fat32 ) and load the proper drivers for your USB-CDrom from a floppy-disk and than start the DOS-installation of XP ( winnt.exe )
In these threads you will find all the information you need :
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=23921
success

Similar Messages

How do I install a fresh copy of Safari?

Operating 10.9.3. Safari is corrupt and crashes on start. Have run Disk Utility with no other complications. How do I replace/restore Safari?

Reinstalling Safari is unlikely to solve your problem, unless you know you corrupted it somehow. How are you connecting to this website?

How to install a fresh copy of windows xp with sp2 on a msi k8t neo

My specifications:
CPU: AMD ATHLON 64 - 3000MHZ
MOTHERBOARD: MSI K8T NEO
RAM: CRUCIAL MICRON 1024MB DDR
HDD: WD 120GB ( C: 60GB, D: 60GB )
HDD: SEAGATE 4GB ( E: 4GB )
DVD: NEC 3520
CD: SONY
The system is on drive C:
primary master HDD 4GB ( on drive E: )
primary slave NONE
secondary master CDR DVD-RW
secondary slave CDR SONY
and last HDD 120GB on primary raid ( on drive C: and D: )
NONE on secondary
I have 2 floppy disks: on the first one it says G72-PRSA060, Promise 376/378 Driver, Disk 1 of 1
on the second one it says G72-VASA040, VIA SATA RAID Driver, For VT6420/VT8237, Disk 1 of 1
Can please someone tell me how to install a fresh copy of windows xp on my computer from scratch? All I know that I have to press F6 at some time and insert one of the disks but I don't know which one. And I don't know when to insert a second disk.
Thanks for helping me

Yeah. I remember when I had that board. I found the best SATA ports were the Promise ones, but...
What do you think, Tiresmoke? You had the same board too if I'm not mistaken.

Hi, how I format the drive and install a fresh copy of Lion?

Hi, I have a Lion installed on a Mackbook Pro 2011, I had Leopard, then Snow Leopard and then Lion, but with so many instalations without formating the system is not working well, I am using an iMac at work with a clean install and is much more stable.
How can I format the hard drive and install a fresh copy of Lion???

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

How to format and install a fresh copy of Mac OS 10.6.4, with another MacBook CD, because i lost the one that came with mine, thanks.

Dear user, can i format and install a fresh copy of Mac OS 10.6.4, with another MacBook CD, because i lost the one that came with mine, thanks.

As you need to be on 10.6 to be able access the App Store to download Lion, either get replacement discs via Applecare (you'll need the MBP's serial number to get the right ones) or get the SL retail disc. I would recommend the Original disc replacement set (assuming they were 10.6) as they carry not onlyApple Hardware Test for your model, but the iLife apps other bundled sftware that isn't on the retail disc.
Once you've installed, and used Software Update to get to 10.6.8, you can then get Lion if you're feeling masochistic.

HT204389 Siri sounds like beta Siri after installing a fresh Copy of iOS 7.0.2

I have a 32GB iPhone 5s on AT&T I recently installed a fresh copy of iOS 7.0.2 and now Siri does not sound like the new Siri she has the robotic voice again. I have went to Settings>General>Accessibility>Voice Over(Which is off)>Languages & Dialects>Default Dialect(Set to U.S. English) and turned enhanced voice on. I watched it download the enhanced voice. Still the same thing. I have powered off the phone and powered it back on. Siri still sounds like the siri of old. I have performed a hard reboot. Siri still sounds the same. When I first got the phone she sounded as advertised. Is there anything else I should try?

Hey hmj9007,
Great question. After restoring or updating a device, the system initially uses a more compact voice while the natural-sounding voice is downloading:
About Siri
http://support.apple.com/kb/ht4992
Can I change how Siri sounds?
Your iOS device initially uses a compact voice for Siri. Your device will automatically download and install a more natural-sounding voice when you first connect to power and a Wi-Fi network.
Change the gender at Settings > General > Siri > Voice Gender. The voice genders that are available vary by country and region.
Change the language at Settings > General > Siri > Language.
If you change either of these, the new enhanced-quality voice will download when you connect your device to power and a Wi-Fi network.
Thanks,
Matt M.

Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy. What should I do?
I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM. But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install. It is like an infinite loop!
Please, someone help!
Thanks!

HI gener7!
I'm sorry but I am not on Creative Cloud. I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application. My AAM version is: 8.0.0160
The link you provided was the update that I wanted to install but it does not work. A window shows up during that install that says:
We've encountered the following issues.
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
Thanks!

HT4718 i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

First of all, I have to ask, why to you "need" to install a fresh copy of OSX?
This may mean that your hard drive is failing, so hopefully you have a backup.
I'm assuming you were in your recovery partition when you did this.
I would, from the recovery partition, repair your hard drive and permissions.
When to Run First Aid in Mountain Lion's Disk Utility - For Dummies
And then try to create the partition again.
If that doesn't work, you have a few options:
Try a third party utility like DiskWarrior or TechTool which may be able to repair your hard drive:
DiskWarrior 4 - The Disk Utility for Mac Disk Repair, Mac Directory Repair, Mac Disk Recovery, Mac Data Recovery or Techtool Pro 7
Try internet recovery, perhaps erase the entire hard drive and reinstall ML.
If nothing else works, then I'd replace the HD and start over.

How can i install a bundled copy of premiere 6.5 with no serial number?

how can i install a bundled copy of premiere 6.5 with no serial number?

shooternz wrote:
The serial # is there for a reason.
not everyone using cs6 is a pirate!
hahahahahahahahahaha!!!

Need to install a fresh copy of firefox

after I uninstalled Kaspersky Internet Security webpages stopped loading. I'm getting Unable to connect message. This issue affected 3 out of 4 browsers that I use. All browsers work in safe mode, but Safari is the only one that works in normal mode. IE Chrome, and Firefox will not work. I thought I need to make a fresh install of the browser to work. First I've tried to reset Firefox to to default settings - this didn't solve issue. Then I've cleaned all attributes via ccleaner: http://screencast.com/t/pOpgoO8c4Olf , then uninstalled FF, then downloaded and installed fresh copy. This didn't solve the issue either. So question: how do I install a truly fresh copy of the browser?

'''[http://www.mozilla.org/en-US/firefox/all/ Download Firefox Full Installer For All languages And Systems]''' {web link}
But before, try these;
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

Installing a fresh copy of OS X Mavericks from USB on iMac 12,1 with broken SuperDrive.

Hi,
I want to get a fresh copy of OS X Mavericks on my iMac 12,1 (mid-2011 - i5 2,5GHz, 8GB RAM, AMD Radeon 6750M with 512MB) with broken SuperDrive. I made a pendrive with DiskMaker X, but I can't boot it anymore on iMac. My flash drive isn' corrupt - it performs well on MacBook Pro. What can I do to install it on iMac?
Greetings,
Jakub Borys
Post scriptum - Sorry for my poor English.

Oh, man, I wish I had something useful to offer. It sounds bad. Really bad.
Do you have a friend -- or possibly a Mac ot work -- from which you could make a new USB Mavericks installer? I only say that because I've read of a few problems here and there with boot drives made with DiskMaker X. What I'd recommend, if it's at all possible, is to download the latest Mavericks DMG file, reformat the USB drive with a fresh GUID partition and then burn the disk image onto it with the Mavericks built in createinstallmedia method. Here's a link to an article which describes how to do it: http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html. This is, in fact, the very article which got me onto the right path.
You'd think that a bootable Mavericks installer would be a bootable Mavericks installer no matter how it was made. Sadly, that doesn't seem to be the case.

How can I install a fresh OS on my 13" macbook. It has a New HDD and I have no install discs. It is a Mid 2010 Model

Can anyone tell me How I can install a new operating system on a new HDD of my Macbook Mid 2010 model. I don't have another Mac to use, I only have a PC, I also don't have access to any discs or bootable USB's.

Thanks for the quick response guys. The fulll story is, I bought the machine as not working from eBay with no HDD. It was listed as water damaged. Im competent at fixing water damage and got the machine up and running again in no time. I put a HDD in that I had lying around that was working last time I checked with hope of being able to format it using a recovery USB download from Apple and then going from there but I can't even get that far. Looking at the model release time it seems it would have been released with Snow Leopard so it makes sense that i'd need to get a disk. Unless you have any other suggestions?

What about installing a fresh copy of Mail?

I am running Mac OS X 10.3.9 with Mail 1.3.11. I have had nothing but trouble with my mail program. Every time I to get one problem fixed, another arises. I am sorely tempted to reinstall Mail, but I'm wary of unintended consequences — the thing I worry most about is losing my saved messages.
I'd appreciate the view of a knowledgeable person regarding the pitfalls. Will I have to uninstall my current program first? Will this be difficult to do? Is there a good online tutorial out there that I can rely on?
I'd appreciate any relevant information. Thank you in advance.

Reinstalling Mail is rarely necessary or appropriate to solve a problem. It certainly cannot fix any problems caused by anything that could be wrong within your home folder or at the server or with the network...
Anyway, to answer your question, the main pitfall is that if the version of the system software on your install disks is earlier than what you’re using now (and only in that case), then you must also reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, to bring Mail back in sync with the rest of the system:
Mac OS X 10.3.9 Combo Update
Actually, for troubleshooting purposes, reinstalling the Combo Update is somewhat equivalent to reinstalling Mail and is often all that’s needed to fix problems that could be attributed to Mail itself.
You may also want to read the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

How to install a fresh copy of Solaris

I need to figure out how to boot from my CD ROM drive, so if someone could help me out finding out what the name of that drive is on my machine (Netra T1 200) and what command specifies to boot from this drive I would greatly appreciate it, thanks alot!

should be "cdrom", try "boot cdrom" or "boot cdrom - install" from the OK prompt.
7/M.

How do I install a bootable copy of Tiger to an external Firewire drive?

I've got a problem with my optical drive and cannot boot from a CD or DVD on my 17" flat panel iMac, running 10.2.8. I have bought Tiger and would like to upgrade my OS but want to be able to run some disc repair utilities on the iMac prior to doing the upgrade but can't run them on my boot disc.
I'd like to be able to install Tiger on my external FW hard drive, install Techtool pro on that same drive and then try to repair the internal drive on my iMac by booting from the external drive. Is that possible? Is it a good idea? Can I install to the external drive from my internal Superdrive without being able to boot from the install DVD? How should I do that?
Thanks in advance for any help.
Michael

Because you must boot from the Tiger DVD in order to install Tiger I'm afraid you are somewhat out of luck. However, with no guarantee either express or implied here's something you can try:
First, download a freeware utility called Carbon Copy Cloner from www.versiontracker.com or www.macupdate.com. Second, connect your Firewire drive and insert the Tiger DVD into the optical drive. Be sure it mounts on the Desktop along with the Firewire drive. Third, open your Disk Utility from the Utilities folder and use it to format or erase the Firewire drive. If you prefer you may wish to partition the Firewire drive to allocate a partition for the Tiger DVD (you will need about 6 GBs.) Fourth, open the CCC utility and click on the Lock icon beside the grayed out Clone button and authenticate. Then click on the Preferences icon. In the section labeled "Target Disk Options" be sure that the box labeled "Make bootable" is checked. No other items should be used. Click on the Save button. Fifth, select the Tiger DVD as the Source Disk, select the partition on the Firewire drive as the Target Disk. Now click on the Clone button.
Go away for a while because the clone process will take time. Once it finally completes you can eject the Tiger DVD. You now should be able to boot the computer from the Firewire drive partition. Open your Startup Disk preference pane, select the Tiger partition on the Firewire drive from the icon list, then click on the Restart button.
If this works your machine will boot into the Tiger installer from the Firewire drive. You can then install it onto your iMac. I would suggest you use the Archive and Install option. You may find the following helpful:
http://discussions.apple.com/thread.jspa?messageID=607363&#607363

How do I install a fresh copy of WinXP SP on Protege 2000

Similar Messages

Maybe you are looking for