How do I install a Lion Recovery Partition

I recently installed a new Hard Drive in my Early 2011 Macbook Pro, and I was wondering if there was any way I could out the Lion Recovery Partion on it.
Thanks In Advance

CCC Carbon Copy Cloner has a utility called "Disk Center" that is included with CCC that will create a Recovery Partition for you.  I understand that CCC is not free, but it does have a free 30 day trial. 
The "Disk Center" in CCC Carbon Copy Cloner is not obvious or easy to find, unless you know where to look for it (in the Window menu pulldown)... it's easy to miss.  Once you find it in the CCC menu system, it is a quick (<5min) turnkey way to create a Recovery HD Partition on any disk, internal or external.
I  thought I should share this, since I burned several hours of pain-staking research and experimentation in search of how to create/re-create a "Recovery HD" Partition for my MacBook Retina Mavericks laptop.  My journey was varietal, including:
Successfully using a manual set of instructions with Terminal to execute a multi-step approach that worked ( http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html )
As well as a utility from musings.slivertooth.us that worked for me as advertised.  Only problem is that while I appreciate and respect the great utility that guy created, my risk-averse nature prevents me from using a non-commercial utility to muck with the low-level details of my boot drive.  Great job, but I prefer CCC since it's backed by a commercial SW company.  Here's his great uility, as referenced in Apple discussion threads like this one:  ( http://musings.silvertooth.us/2012/03/restoring-a-lost-recovery-partition-in-lio n/ )
Therefore, I was relieved to discover that CCC has a utility specifically designed to do this for me.
FYI: How did I find myself in this position?  I lost my Recovery HD partition because I used Super Duper to Clone my HD/SSD, and subsequently restored my MacBook at one point.  Super Duper has worked awesomely well for me for several years.  It clones HDs/SSDs without a glitch, and makes them bootable automatically.  The only gap or lack of function I have discovered is that "Super Duper" does not Clone the "Recovery HD" Partition.  CCC Carbon Copy Cloner does.  So, while I like Super Duper, I'm switching to CCC Carbon Copy Cloner for my backups from now on.
Disclaimer: I don't work for CCC.  I'm just an I/T Professional that needed to figure out how to create/re-create a Recovery HD Partition...

Similar Messages

  • When starting up my iMac with Option Key held down, my recovery partition shows 10.9 instead of 10.10.  How do I install the correct recovery partition?

    iMac (27-inch, Mid 2011)
    Yosemite 10.10.1
    When I start up my iMac with option key held down, the recovery partition is shown as 10.9 instead of 10.10 which is the installed version.
    How do I install the proper recovery partition?

    Thanks very much for the quick reply.  I figured it would something that simple.  Like I said, I only know enough to cause trouble.  LOL
    Thanks again,  Guess I need to find a new game to play.  LOL

  • How to rename a hidden Lion recovery partition?

    I want to put a Lion recovery partition for each post Snow Leopard computer I'm supporting, but can't find a way to rename them, so that I don't have a bunch of identically named partitions to choose from. Any ideas?

    First enable Disk Utility's Debug menu by entering this in Terminal:
    defaults write com.apple.DiskUtility DUDebugMenuEnabled -bool YES
    Then relaunch Disk Utility.  Under the Debug menu, select "Show Every Partition".  The Recovery HD will appear in the sidebar.  Click it once, and then click "Mount" in the toolbar.  The Recovery HD will then mount on the Desktop, where you can rename it like any other Finder item.

  • How do I install just the Lion installer via the lion recovery partition.

    I am trying to bootcamp windows 7 on my new macbook pro (early 2011), the installation was successfull but i am missing drivers on the windows side and cannot access the internet until i install them.  I installed all the bootcamp updates and put them on a usb to transfer to windows partition but windows kept telling me i need an earlier version of bootcamp which is not available from the update support downloads section of the apple website.
    After some research i realized i needed the mac boot disc for lion, which doesnt exist so i need to create my own.  I was told i could install lion from the lion recovery partition.
    here is my question....If i install lion onto my mac partition that currently has lion, can i stop the download after the initial 4 gb installer and not go through with the full re-installation of lion?  so that i can then take the installesd.dmg (i think thats right) file and put it on a dvd to install from the windows partition and finally get the drivers i need to get it running.
    Comment: based on what i have read on how you used to bootcamp a mac, apple has made it very difficult, unneccesarily difficult it seems.

    Before you do anything else, I suggest a thorough read of this:
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • How to delete lion recovery partition

    i have mac book air 13inch with 128g hdd
    when i install lion, it creats lion recovery partition on my HDD
    and it does not clear out and stays all the time
    i want to delete the lion recovery partition and make my HDD united to only one partition
    how can i do this?
    it there any way to do this?
    help me~~~

    You could, but not recommended.  The recovery partition is
    there so that you can repair or re-install Lion if necessary.
    I don't recall, but I think some people have had issues with
    some Mac models booting Lion if a Recovery HD is not
    present.  Not sure if the Air is one.
    First, to be safe, you should probably make a USB stick
    installer or DVD for Lion should things go south on you and
    have to reinstall from scratch.
    Next,the simplest approach would be to clone your Lion
    install to an external, bootable hard drive using either
    Carbon Copy Cloner or Super Duper.  When that is
    complete boot to that volume then reformat the internal
    volume, then clone the external volume back.
    Don't interrupt any of the processes or you could
    end up with a MacBrick.

  • How do I install Leopard on the partition I've created on my MacBook Pro running Lion?

    I've partitioned my hard drive (running Lion) so that I can run Leopard. How do I install Leopard on the partition? I've put in the Leopard CD and restarted, but all I get is a black screen with a bunch of gibberish.

    There's no way the MacBookPro will boot to Leopard.
    Snow Leopard may be possible, but you'd need the original discs from Apple customer Service - the retail disc isn't a high enough version.
    To check viability of Snow Leopard, have a look at a.brody's article;
    https://discussions.apple.com/docs/DOC-2455
    If it looks like SL is feasible ring the Apple Customer Services with the model and serial no. and see if the original SL discs are available.

  • How do I restore a missing recovery partition in Mountain Lion so I can activate Find My Mac?

    I am missing my Recovery Partition on my MacBook Pro (Retina), so I cannot activate Find My Mac.  How can I restore the missing recovery partition?

    Gin Tonyx wrote:
    Kessler, thx for your insight. That helped me.
    [personal]
    Csound: I read the terms. Section 3 of the submissions rules says "Post constructive […] questions. Unless otherwise noted, your Submission should […] be a technical support question […]."
    I don't see where I went wrong. Maybe you could get off my back, please. Willya?
    [/personal]
    You should have kept reading until item 5
    5. Test your answer. When possible, make sure your Submission works on your own computer before you post it.

  • Hi, I have a late 2008 iMac with a new hard drive. How do I install Mountain Lion from my bootable USB flash drive.

    How do I install Mountain Lion to a new hard drive without having the recovery partition on it.
    I have the USB flash drive with software on it but when I switch my Mac on all I have is a white screen & a flashing question mark.
    ATB,
    Steve.

    Did you use LionDiskMaker or DiskMaker X?
    Boot the machine with the option key down until you see your bootable USB stick.  Select the latter, and reboot.
    When the installer boots up, you will first need to choose Utilities and Disk Utility. Select the target HD device name and then the partition tab. Select 1 partition, name it Macintosh HD. Format is Mac OS Extended, and option is GUID. Apply. Exit Disk Utility and return to the installer, which will now show your newly partitioned HD as available for install.
    When OS X is installed and all updates applied, press shift+command+U and run disk utility again. Verify/repair permissions and verify the boot disk.

  • Will reinstalling Lion via the Lion recovery partition cause you to loose all of your applications, documents, etc or does it just replace the Lion operating system and leave everything else untouched?

    Will reinstalling Lion via the Lion recovery partition cause you to loose all of your applications, documents, etc or does it just replace the Lion operating system and leave everything else untouched?

    The latter. I cant tell you how many times I've reinstalled lion! all your apps will be fine!
    Things that will change are system graphics if you altered them with something like candybar or did it manually.
    Having said that, you should always backup your stuff with time machine incase something does happen.
    This is a very important step which will insure the safety of your files while doing things like updating or installing the OS.
    Please exercise caution when doing things with a Hard Drive.

  • Removed Lion Recovery Partition!

    I have removed the Lion Recovery partition and shat should I do now to get that back again?

    Download Carbon Copy Cloner and WinClone 3
    Get two blank external drives, make sure they are formatted GUID and OS X extended journaled in Disk Utility (actually check Winclone for their external drive format requirments for Windows)
    Use CCC to clone the OS X partition to one external drive.
    Use Winclone to clone the Windows Boot Camp partition to the other external drive.
    Disconnect all drives.
    Now the problem is how to get Recovery HD back onto the machine.
    If you upgraded 10.6 to 10.7/10.8, then hold option/alt and boot off the 10.6 disk, use it to erase the entire internal drive of everything, then install 10.6, upgrade to 10.6.8 and reinstall 10.7/10.8 from AppSore by option click on Purchases or whatever it uses, that will put the Recovery HD back on the machine.
    If your machine came with 10.7 or 10.8, then hold the command option and r keys down and boot the machine on a fast Internet connection (Ethernet the router preferred) and this will load Internet Recovery from Apple's servers. Use Disk Utility there to erase the entire drive of everything and quit, then reinstall OS X from Apple's servers, it will recreate the Recovery HD partition that way, as it's assuming it's a new drive it's installing on.
    When you have your machine in order, go to BootCamp and set up your partition again, then quit.
    Hold the option/alt key down and boot off the OS X "CCC" clone you made, now use CCC to reverse clone OS X back onto the internal drive.
    Connect the Winclone drive, run Winclone and clone that back onto your BootCamp partition.
    When done, reboot and disconnect all drives, head to System Preferences > Startup Disk and set it to either OS X or BootCamp as the default boot. As you know if you change your mind to hold option key at boot to go to the other instead.

  • Problem creating Mtn Lion Recovery partition on external drive.

    USB external.  Newly erased, three partitions: one 2GB for Recovery HD, other two backups of my old SL machine and new ML machine (Mini). Those work and their respective machines fine.  Drive seems OK.
        Used Recovery Disk Asst v. 1.0 to create Recovery HD on the small partition while booted into 10.8.2 (the brand new Mini).  Factory installed Mtn Lion Recovery HD exists on internal drive and it works— when starting with command-R or command-shift-R, not with Option key.     Install of Recovery HD to external seemed to go fine and doing a "diskutil list" in Terminal showed both the internal and external Recovery HD's, properly named as such.   However, when restarted with Option down the recovery partition showed up named the same as my internal— at that point "Macintosh HD" but later when I changed the internal's name, reinstalled the Recovery HD, and restarted with Option key the recovery partition now was named the same as new internal drive name.   Both times choosing the recovery partition resulted in booting into internal drive.   
    Was wondering if anyone had a similar problem— and found solution/reason.   Apple Tech Support particularly not helpful/knowledgeable on this subject. 

    Hi Baltwo
       Really appreciate the help.   Many thanks.     Finally seems to be working.     Not sure exactly what worked but in case you're interested I'll give you a, hopefully, short summary:
    Using DU (after copy/paste of the command you wrote above into Terminal) I cloned the working internal drives RDH to the partition for it on the ext.   Failed— still seemed to work as almost an alias pointing at the boot volume on the internal.
    So, erased the external again; didn't partition, did a reinstall of ML from DU while booted into RDH of internal.  Then started from that new ML partition on external and let Setup Asst migrate everything over from the internal to keep Users/Permissions from being a problem.
        When that finished I tried to restart w option key.   Got a recovery HD that was called exactly that but, again, booted into internal boot drive.   Booted into internals RHD just to make sure it was OK and it was.
       For whatever reason again restarted w option key.   This time I got four choices:  the boot volume of internal and external, an ext volume called Recovery HD (the trickster), and another volume called Recovery 10.8.3.   Something new— and, as Bill Murray said in Ground Hog Day, "anything new is good."   So I tried booting into that new RHD 10.8.3.  (Note, I'm still running 10.8.2 on boot volumes.)
      And that worked— booted into Recovery HD but no way that I could figure to see for sure that it was the Recovery HD on ext vs. on internal.   I think I need to activate the Debug menu on the RHD DU so I can choose the 10.8.3 recovery and see if I have the option of Repairing the disk or it's greyed out.  If greyed, then proves I'm booted into it.   Might be a more elegant way to see that but it's the one I know.    Still, I assume I was in the RHD on the external.
      Then made a second partition for the old mac's backup and that initially resulted in the boot volume of the internal backup not be mountable but after a restart or two testing the two RHD's, the mini decided to see all the volumes and things are, for the moment, copacetic.  
      Hope that wasn't too long and boring.    From my experience and reading on the 'net, my general sense is that there are a bunch of variables that all have to be right for this process to work.  Probably less is more and just installing ML on a disk by itself will be the most reliable method, if most wasteful of data storage. 
    Regardless, couldn't have done it without you, baltwo.   I don't use this forum enough to know what the etiquette and protocols are but I marked all of your posts as useful, which they were, and, finally, as solving my issue, which they did. 
    Thanks again

  • How do I setup the HP recovery partition on my HP Pavilion DV7-1232nr

    How do I setup the HP recovery partition on a drive that has been erased of it’s HP tools recovery partition like in the recovery patition size needed on the harddrive and how it should be setup like in should it be set as Active,Logical,Primery,etc etc etc
    I get the following errow when trying to restore from my recovery disks I made with HP phone support
    Error ---> this pc is not supported by the system recovery disks. you will not be able to continue to recover this system this these disks.
    go figure ) > :
    system
    HP Pavilion DV7-1232nr
    HD 320 gig
    Ram 4 gig with 3.75 gigs still free
    CPU AMD Turion X2 doul core mobile RM-74 2.20 GHZ
    HP Windows 7 Home 64 bit Full install
    This question was solved.
    View Solution.

    The Recovery partition is recreated when doing a successfull reinstall from the Recovery Disks.
    Enter BIOS by tapping away at the F10 key immediately after powering on. Is all system info complete there?
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Lion Recovery partition on 2011 MacBook Airs

    I did a post for my blog yesterday concerning the use of the Lion recovery partition in solving the problem of turning on Find My Mac. I've had a very positive response from readers, most reporting success. But one has raised a question I cannot answer.
    Here is the original article
    http://www.macfilos.com/home/2011/10/16/icloud-cannot-turn-on-find-my-mac-recove ry-system-update-req.html
    My reader maintains that the Lion recovery partition is not active on her 2011 MacBook Air. She has the latest OS X build and has also installed the Lion Recovery update. I can't really believe this, but I only have a 2010 Air to play with. Can someone confirm or deny?
    The problem I (and many others) had was that the recovery update was not being recognised, the reason being a corrupt volume. After repairing the volume using the recovery partition it was then possible to reinstall the recovery update and subsequently turn on Find My Mac. It could be that my reader has a more intransigent version with the same cause that needs additional work.
    Michael

    If she enters in Terminal
         diskutil list
    if there is a Recovery Partition, she'll see:
         Apple_Boot Recovery HD             650.0 MB   disk0s3
    as the last partition.
    See also: https://discussions.apple.com/message/16417843#16417843
    Tony

  • How do I install Mountain Lion on both my iMac Desktop and my wifes MacBook

    How do I install Mountain Lion on both my iMac Desktop and my wifes MacBook Pro?

    Open the app store, purchase ML. go to second computer open app store select purchases at the top and click download.  This is provided both computers use the same account. 
    http://www.apple.com/osx/how-to-upgrade/

  • How do I install Mountain Lion on a thumb drive?

    How do I install Mountain Lion on a thumb drive when my computer is running Mavericks? I downloaded the Mountain Lion installer, but when I attempt to run it I get a message that says "You cannot install OS X 10.8 on this computer." I don't want to install it on the computer, I want to install it on the thumb drive—but it won't give me a choice of drives.
    The reason I want to do this is I want to be able to boot my iMac into Mountain Lion in order to test a hardware/software combination I suspect might be incompatible with Mavericks.
    (Note: there are plenty of instructions online for how to create a bootable thumb drive with the Mountain Lion installer, but that's not what I want. I want to install ML on the thumb drive itself.)

    Sure you have a proper installer application. When I start it I get:
    Clicking on Continue, then accepting the licensing stuff, gets me to:
    If you click on Show All Disks, then all mounted disks will be presented including your flash drive.
    Now the above is a Mavericks installer, but it's the same for Mountain Lion.

Maybe you are looking for