How do I install a Mac Pro AirPort Extreme Card?

I upgraded from a Verison USB Internet stick (shared amongst four computers--2 Mac and 2 PC) to a Verizon MiFi 4510L router, I found out that only my iBook was wireless enabled. MacMall told me which AirPort card to buy for my MacPro but it has no instructions and I can't find any online. Does anyone know how it's done or has a link to instructions they can share? Also, once the card is installed, is getting connected intuitive or is there more to it than that? Thanks.

http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/
https://discussions.apple.com/message/16276201#16276201

Similar Messages

Mac Pro Airport Extreme Card Install

So I've read just about every thread that I can find on this, and there's been so much discrepancy on which antenna wires to connect. I've tried just about every combination, and the card is showing up in the system profiler (en2), but when I click "Turn Airport On" in Network Preferences, nothing happens. At all. Anyone have any suggestions? Is there an airport update that I need to download? Thanks!

You probably don't need an update. But you have to enable it before you can turn it on. I suggest you do the following:
* Reboot and clear PRAM (CMD-OPT-p-r at boot time).
* Open the Network Preferences panel and highlight the Airport.
* Click on the gear icon below the list and make the airport active.
* Reboot.
This will probably solve your problem.

Mac Pro + Airport Extreme = Mouse Cursor Chaos Display Issues When Dragging

Graphic display issues (mouse lag and latency displayed on the screen when dragging an object (photo, window, application, document, etc.) from the top 50% of the screen to the bottom 50% of the screen. Mouse cursor starts to display serious lag and latency and loses ability to stay on the object being dragged anywhere below the 50% horizon line of any display.
Mac Pro (any model 2007 to current 2009 production) with Airport Extreme installed.
Symptoms:
On any object the mouse cursor selects and then drags from anywhere in the upper portion (50%) of the screen display (no matter the display being used) to the bottom portion (50%) of the screen display, shows great lagging and latency as if the cursor is "hanging on for dear life" or as if the processor were running several intense applications and cursor was not responding.
The mouse cursor fails to stay in concert with the object being dragged anywhere in the lower portion of the screen although is fine in the upper portion of the screen.
Issue only presents itself when selecting and dragging an object from bottom to top or top to bottom of the display.
I have deduced that the issue with this "polarity" (i.e. the 50% horizon level of the screen north and south) is due to some magnetic or waveform interference from the Airport Extreme card and most likely due to its position on the motherboard and/or next the the Intel processor. Also could be enhanced by the Bluetooth card which is also located next to this card.
After checking various Mac Pros (at Apple stores, friends and received via Apple Online store) the common denominator is the Airport Extreme Card. When it is NOT present, no issues are present with display cursor lag; when it IS present, all the above apply.
No one at Apple seems to realize this issue or cares about it. Ditto for Genius Bar Apple Employees; seems to be a mystery on par with the Bermuda Triangle (which ironically is also magnetically-polarity related.)
Still waiting for a Apple Product Engineer to contact me and have 3 tickets open with Apple from 3 different Mac Pros on this. Problem first noticed May 2009 although first generation Mac Pro from 2007 also suffered same issues and just now putting the puzzle together on this relationship.
Any others out there notice this as well? Check it out if you have a Mac Pro and Airport Extreme Card installed inside of it.

I also have the same exact problem. I have a i5 iMac Mid 2011 with an upgrade to 10.10 Yosemite connected to an external display. I like you never had this issue with Mavericks. Zoom is so painfully slow now that I had to disable it. My iMac has 12 GB of RAM and even with no apps opened, zoom is killer slow.. makes me want to punch a wall-kinda slow.
I think it's clear to say that something is up with 10.10.. some bug.
Apple please fix us zoomers

X64 driver for mac pro airport extreme

Does anyone know how or where to get the driver for the airport extreme that comes in the mac pro, that will work in windows XP x64 edition?

If i can just jump in here folks, i've just installed the airport enabler and it hasn't changed a thing for me. My menu bar icon still shows 2 or 3 bars and the info in network utility says MODEL 80003 ESB2, certainly not what it shows on Apple's website. I'm running 10.4.8 and software is all up to date?
I just reinstalled 10.4.7 on my spare drive and airport is showing full bars and that's without the airport enabler installed?

How do I install Enabler from the Airport Extreme disk?

Recently I purchased an new Airport Extreme. One of my 3 computers is a 2 GHz Intel Core Duo iMac with 20 inch display (iMac4,1). It is running 802.11g. I wish to enable it for 802.11n. I am confused by a statement about the enabler, which is found at the following link for the AirPort Extreme 802.11n* Enabler for Mac (http://store.apple.com/us/product/D4141ZM/A?fnode=MTY1NDAzOA&mco=MTA4MjgwNzI). The statement is, "Important note: The Enabler is included free with the new AirPort Extreme Base Station with 802.11n. If you purchase a new AirPort Extreme Base Station, you do not need to purchase the Enabler separately." On my iMac, the Network Utility indicates the iMac is not enabled for 802.11n. I have kept the software on the iMac up to date. Thus I assume that somewhere on the disk that came with the Airport Extreme, there is an enabler file I need to access. Where do I find this, and how do I enable the iMac for 802.11n? Thank you.
Sincerely,
Wilson

I am still a bit confused, because the information at the link I gave seems to indicate that a person with my model of computer should be able to use the AirPort Extreme 802.11n* Enabler for Mac.
1. My computer is not a 17 inch 1.83 GHZ. It is a 2.0 GHz Intel Core Duo iMac with a 20 inch display (measured diagonally).
2. The web page (http://store.apple.com/us/product/D4141ZM/A?fnode=MTY1NDAzOA&mco=MTA4MjgwNzI) says check "Before purchasing the 802.11n Enabler software, please check to make sure that your Mac does not already have the 802.11n enabler already installed."
3. It then shows how to use the Network Utility to see whether or not the enabler is installed ("If the section "Model: Wireless Network Adapter," if it says (802.11a/b/g/n), you already have the 802.11n enabler installed. If it says (802.11a/b/g), you do not have the 802.11n enabler installed." My computer lists "802.11a/b/g".
3. Thus I assume that all now I need to do is to install the enabler, which one then can purchase, which one then can do through the Apple Store web page.
4. My issue is that the same web page says I do not need to purchase the enabler if I have already purchased the Airport Extreme base station. ("Important note: The Enabler is included free with the new AirPort Extreme Base Station with 802.11n. If you purchase a new AirPort Extreme Base Station, you do not need to purchase the Enabler separately.")
What have I missed?

Epson D120 Leopard 10.5 Mac Pro Airport Extreme

Printer seen every where, except it;s staus while connected to the aiport is offline, communication error? any ideas?

Well here is an update.
I saw an entry in apple support that said I had to change some setting in the apache folder /etc/apache2 in order to avoid getting the 403 forbidden error. I tried this and it did not work, i checked my user configuration file as well and the path to my home site directory was correct
Anyone here have a similar setup and has it working? It shouldnt be too hard to set up web sharing through a router. It has to be possible or else a lot of people would not buy a router because of this.
thanks in advance to anyone kind enough to help
Bye.

What model of Airport Extreme Card for 2007 Mac Pro 2.6GHz

I am trying to find what model of Airport Extreme Card I need to install into my 2007 Mac Pro 2.6GHz
I understand that there is a 2008 card which is incompatible, so I don't want to buy the wrong one.
Any help appreciated.
Laus.

Its really confusing when Apple calls their internal wireless card on a Mac an AirPort Extreme card......and they also market an outboard wireless router called an AirPort Extreme. See info below:
http://www.apple.com/airport-extreme/
You posted in the support community for the Apple wireless routers.....AirPort Express, AirPort Extreme and Time Capsule.
While it is possible that someone here might be able to answer your question, you will likely receive a much faster and more informated response if you post your question again in the support area for the Mac Pro.
The link to that support area is here:
Mac Pro

IBook G4 won't start up after installing Airport Extreme card

Hi,
just installed an Airport Extreme Card into girlfriends iBook G4 (10.4.5), which now won't start up. After pressing the start button all I hear is the fan spin (pretty fast actually), but nothing else happens.
When I remove the card the iBook starts up normally.
Any thoughts what could be wrong? Bad card? Bad connection?
Thanks a lot

Sven, Welcome to the discussion area!
Are you certain that you have an AirPort Extreme card?
Are you certain that it is an iBook G4? The iBook G3s require the original AirPort card.
If both of those are OK, then one (or more) of these is true:
The card isn't installed correctly.
The AirPort Extreme card is defective.
The iBook's motherboard is defective.

Airport Extreme Cards File Sharing

Can two Macs with Airport Extreme cards installed file share? Can this be done with only the cards and without a base station?

Yes, file sharing is the same regardless if you are connected via Ethernet or wireless.
Can this be done with only the cards and without a base station?
Yes you will just need to use on of the Macs to create a wireless network. See KB 166640, Setting up a Computer-to-Computer network.

How do I install a airport extreme card in a mac pro (Intel 2008)

How do I install a airport extreme card in my mac pro (intel) 2008 computer

What Wifi Cards Do Mac Pro 2008 model use???
http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

Installing Airport extreme card for 2008 Mac Pro

After some searching I finally found which airport extreme card to get for my 2008 Mac Pro that I just purchased recently . According to the the link below in the Apple archives it is part number MB363Z/A. However the link further down in the thread for the instructions on installing the card doesn't seem to work any more. Anyone know where to find another link for some detailed instructions or pics on installing the card. I haven't found any as of yet. I installed the old extreme card in my G5 pretty easily, but this seems a little more involved in the Mac pro from what I've read so far.
thanks, Craig
http://discussions.apple.com/thread.jspa?messageID=6563623

Ok never mind I found the old link seems to work now with detailed pics and instructions. Sounds like it's a bit of a pain but can be done with patience. Just have to get the card now.
http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

Would an Airport Extreme card newly installed in a Mac Pro require Leopard?

Hello friends,
Yesterday I went to the Apple store and had them install an Airport Extreme card in my Mac Pro. The airport is found, activated, and works for a computer-to-computer network between the Mac Pro and a Macbook. However, it doesn't find any other wireless networks, even though the laptop is right next to it and detects them fine.
I am wondering if perhaps the Airport card I got is not compatible with OS X 10.4.11 and that I require 10.5.x for it to work.
Alternatively, whether there is some configuration tweaking I can do to get it working.
The Airport card is described in System Profiler as follows:
Wireless Card Type: Airport Extreme (0x14E4, 0x88)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.9)
Thank you for any help. Pretty frustrated; have a slow wi-fi connection here anyway and can't even get cell reception at the site so it's hard to research the problem!
- nick

Not sure what you mean "configure by ethernet."
Do you mean to connect the computer to the wireless base via ethernet to configure the computer's network settings for that network, and then have the wifi card ride those settings?
Do you have any idea whether OS X 10.5.x is required with the latest airport cards?
Thx
-nick

How to setup a network setup with an airport extreme card in a mac pro

I have installled an airport extreme card in my mac pro. Restarted the mac. The AP black triangle appears on right top of the screen. If I activate the AP than the a light grey triangle appears, with grey bars. I can create a network, than the triangle becomes dark grey with an kind of black computer icon in the grey area. The signal strength shows all blue bars.
I have two other wireless networks (linksys and another for streaming music) both are working and detected by my imac. But the mac pro does not detect these networks.
I would have thought that the two networks would be detected automatically.
Please some advice to solve this problem
Imac G5; Mac pro Mac OS X (10.4.4)

You won't believe this, but the card is a crock. Mine was installed by an Apple tech at an Apple store. He obviously did not check out reception.
At home, I tried setting this up right next to a Netgear wireless router (2 feet away!), and got no signal bars. Yet I pull the cover off the machine and I get 4 bars and can connect to an 802.11g network. This stinks. What idiot at Apple designed a card where the antenna is a 1" square piece of metal? Could this be an emi cage? Where did they hide the so-called "built-in" antenna. Who knows?
See if you can aim the back of the machine toward the wireless router. There is a back door into this mother, through the fan(ny) opening.

Installing an AirPort Extreme Card in a new Mac Pro 3

I am a brand new Mac convert. I just purchased a new Mac Pro 3.QX and have to install an Airport Extreme Card. I'll be damned if I can find out where it should be installed...

Ok, so this is pretty hard to explain without pictures but lets go through it step by step.
Before you ever handle the inside of your computer first make sure the computer is off and has had sufficient time to cool off. Also make sure that you have already discharged any static from your body. In addition make sure all cords are unplugged from the computer and you use all proper safety equipment.
-Lay the computer on it's side and take off the side panel.
-Connect the airport antenna wires to the antenna connectors on the card. (Make sure you connect the wires labeled "1" and "3", the other should be taped to the side.)
-Insert the card into the connector on the logic board at a slightly upward angle and then when it's in, lower the screw end of the card down.
-Install the two airport extreme card screws, replace the side of your computer, and you're done.

AirPort Extreme card not compatible with Mac Pro???

Hey,
I recently purchased my Mac Pro without thinking to include any hardware for connecting to a wireless network.
I have recently moved into a new apartment which I am keen to join to a wireless network which has just been set up by my roommate for his PC and Laptop.
I was going to buy an AirPort Extreme card, but I have read that it is not compatible with the Mac Pro. Yet when I looked at the configure process for a new mac it was listed as one of the devises offered for wireless networking!!
I am very confused...
I was wondering if anyone could help me, i just need to know what hardware i will need and how it would be installed.
thanks, all help will be greatly appreciated!
Mac Pro Mac OS X (10.4.8)

the mac pro takes a slightly different airport express card. you have to purchase it at the retail store and have them install it. in my experience they will not allow you to purchase one and install it yourself due to the difficulty of installing it. best thing to do take your macpro into a apple retail store and see what they can do.

How do I install a Mac Pro AirPort Extreme Card?

Similar Messages

Maybe you are looking for