How do I install a new AirPort Extreme on a Windows network?

How do I install a new AirPort Extreme on a Windows network?

To configure a new 802.11ac Extreme requires AirPort Utility for iOS or AirPort Utility for OS X.
http://www.apple.com/airport-extreme/specs/

Similar Messages

  • How do I make my new Airport Extreme a base station?

    I have been using an Airport Extreme (5th generation) as my base station router for a few years. I set the main network for my and my wife's use and created a guest network for when my sons visited and needed to use the wi-fi connection. I used passwords for both networks. Today I purchased a new 802.11 ac Airport Extreme. I unplugged the 5h gen. Extreme and plugged in the new Extreme. After a short hunt, my new 27" (late 2013) iMac found the new Extreme and had me set up a name and a password for it using Airport Utility. I was expecting it to ask if I wanted to set up a guest network, but it did not. I was expecting it to ask since I believe that is what happened when I installed my 5th gen Extreme a few years ago. For the 5th gen Extreme, I had to enter a password to protect settings on the Extreme, a WPA2 password for my main network and another password for my guest network. It took about 10 minutes to set up. For this new Airport Extreme I entered just one password. It took about 2 to 3 minutes for the entire setup. When I checked the menu in the Airport Utility under "Base Station", all lines are grayed out. Under the File Menu in Airport Utility, "Configure Other" is available, but "Import Configuration file" and "Export Configuration file" are also grayed out. I checked Network Settings in System Preferences and I see my new network name in the Wi-Fi menu and under the "Advanced..." button, I see the old and new Networks listed in the "Preferred networks" box.
    So, how do I get the new Airport Extreme to act as the Base station and be able to enter a guest network? Does it require me to delete the old Network name from the Advanced... button page in System Preferences > Network Settings? Will I just have to start all over with the new Extreme to make it a base station?

    Hello Leo,
    I'm not at home so can't confirm but I can only assume that maybe some of the "old" settings in airport utility have changed, and simplified.  Hence why you probably only need one password.
    When I bought the new "tower" like AirPort Extreme, I just plugged it into the Ethernet, powered it on with the previous generation Extreme in place and in Airport Utility it just asked me if I wanted to copy the settings to the newer device, which included a few "port forwarding" settings.  All done in this sequence.  I didn't have guest network set up but you can still set up guest network under wireless in Airport Utility, hope this helps!

  • I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
    If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
    If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

  • Installed my new Airport extreme and try to link it to airport express  but the wifi still very slow

    I installed my new Airport extreme today and try to link it to my airport express to expend my wifi coverage to my second floor  but the wifi si very slow on second florr not better then without express? what can I do??

    Hi Francois
    Any wired connection or WiFi network extension (using your AirPort Express) with your second floor will make your network signal stronger but not necessarly faster.  If your WiFi signal is so poor that internet connection keeps dropping, it will make a speed difference.  Otherwise the only difference you'll notice is that the range of the wireless network has increased.
    You say "wifi is very slow on the second floor".  Do you mean that the internet is slow?  Is it very fast on the first floor?
    Try checking your internet connection speed on a laptop on each floor:
    speedtest.net
    and press "begin test recommended server".
    The download speed should approximate your ISP contracted speed.  Upload speed will be a fraction of this.  Wifi will be slower but unless you have a super-fast internet connection, you probably shouldn't notice it.
    Peter

  • After we installed a new airport extreme, the imac running snow leopard displays black box msgs saying to hold down the power button and or the reset button and then restart your computer. Can anyone provide info that can help resolve this issue?

    Experiencing similar issues on both imac and power book: after replacing an original airport extreme with a new airport extreme both computers display a black box msgs that reads: "...turn off your computer by holding down the power button and or the reset button for a few seconds and then restart your computer."...
    one of the printers are usb'd to the imac. The printer is not "seeing" the imac nor will it print wireless from the powerbook which was the norm prior to the upgrade on the airport extreme.
    Upon restart, the imac does not "see" the wireless keyboard or the mouse until it is "found" again.
    At this time the imac or the powerbook can get on line.

    It sounds like your computer is getting Kernel Panics. Please look at About "You need to restart your computer" (kernel panic) messages and if the message seen on your display is like the one in the link then you have confirmed you had a KP. KP's can be tough to track down because they can be caused by software or hardware. The first place to start is to post the complete crash log so we can look at it, often there are clues in the log. You can find it at:
    /Library/Logs/DiagnosticReports

  • How to add old airport extreme 11g to new airport extreme 11n to extend network?

    I am trying to use my old Airport Extreme 11g to extend my wireless network from my newer Airport Extreme 11n. Are they compatible?

    They are, but you may want to think twice before using this approach. The reasons are: 1) The extended network will only operate in the 802.11g Radio Mode, and 2) The overall bandwidth will be reduced by half for each base station added. Since this will be a "g" network, you'd be getting around 25-27 Mbps maximum of bandwidth.
    If you still would like to pursue this, please check out the following Apple Support article for the details.

  • Help Installing My New Airport Extreme

    So I bought a AirPort Extreme 802.11n Wi-Fi but I'm not really sure how to hook it up. The Main computer is a dell with windows xp media center and my mac is a G5. the first thing i need to know is which computer to i hook the router up to the main pc or the mac?

    Depends on where you want to put the Extreme. For setup, either machine will be able to set it up once you fire up AirPort Utility to configure it. Just follow the setup manual. Ideally, if you need Extreme to create the wireless network, you will place the Extreme near you internet broadband modem.

  • How can I utilize a 2nd Airport Extreme to extend a network but not WIFI, only hardwired?

    Hi All.  Need your help figuring this out.  The location of the cable line in my home causes a bit of an issue for my internet dependant electronics.  My computers have no problem connecting over Wifi but certain peripherals require an ethernet connection as Wifi is not an option for them.  I have prepared this quick diagram to explain my perfect set up.  I have a current gen Airport Extreme and a Previous gen as well.  How can I set my 2nd Airport to receive the Wifi from my main airport, but then only serve as a router, not extend the WIRELESS network.  Only provide a hardwired network.  In other words, I know how to "extend network" with airport utility, but then the 2nd airport also casts its own wifi network and causes problems.  I only want the one single Wifi network.  The 2nd router should only be providing ethernet connectivity.
    Is this even possible?  Both Airports are running the most updated firmware.  Any advice would be greatly appreciated!!!

    With a properly configured extended network both AirPorts will be broadcasting the "same" Wi-Fi network. This shouldn't impact wired clients at all. The other advantage of using an extended network is that your older AirPort Extreme's Ethernet ports will be enabled for wired clients.
    At present the only other option would be to connect the older Extreme to the newer one using an Ethernet connection between them. Then disable the older Extreme's Wi-Fi radios.

  • How do I install a new airport express and link a second airport express to extend the network of the first airport express?

    I currently have a linksys wireless router attached to the Internet.  I have an A1264 Airport Express connected by Ethernet to the linksys router.  I have two network names, one for each wireless network.
    I purchased a new A1392 Airport Express to replace the linksys router and join to the A1264 Airport Express, and I want to have one network name as a result.
    How do I do this?  I realize that I have to reconfigure the A1264 device so that it is an extension of the A1392 device.

    You have a fairly complicated set up, so I suggest that it would make sense to tackle things in stages, testing each stage as  you go, before proceding to the next stage.
    Stage 1 would be setting up the A1392 first to the cable modem, and then making sure that everything is working correctly on the A1392 Express
    Stage 2 would be adding the Netgear switch and testing each port with a laptop connected via Ethernet to make sure that everything is operational on the switch
    Stage 3 would be connecting the A1264 Express and testing to make sure that it is extending the network correctly
    Stage 4 would be adding other Ethernet devices to the Netgear switch and testing each one at a time before adding the next device. There is some question about whether an iOS device can print to an Ethernet connected printer....even if the printer is AirPrint compatible. You may need to connect the HP using wireless...not Ethernet....to gain full AirPrint functionality, or use another application that will allow printing like Printopia or Print Central using the Ethernet connection on the HP.
    Stage 5 would be adding the printer to the A1264 AirPort Express.
    You do not mention how the printer will connect to the A1264 Express, but I assume that it will be USB from your description.  Most printers will work, but you really will not know if your printer will work until you try.
    Remember that only printing will be supported at the USB port of the Express. If you have an all-in-one type device, scan, maintenance, and other advanced features will not be operational whent the device is connected to the AirPort Express.
    If you want to print from an iOS device like an iPad or iPhone, plan to add additonal software like Printopia or Print Central to possibly allow this function. There are no guarantees here as far as the iOS devices.

  • Does the new Airport Extreme work with Airport Express??

    I just installed the new airport extreme and I can't get my airport expresses to function as a part of the network. Does anyone know how to get past this? Do the expresses work with the new extreme?

    I assume this issue is true for both Express base stations ... that is, that their status lights go to solid amber when removed from the Extreme base station. A solid amber would indicate that the base station has failed to reinitialize with its "new" configuration.
    The only recommendation I have at this point, is to start over with just a single Express. Perform a "factory default" reset on both the Extreme and the Express. Leave them both powered-off after they complete their respective resets.
    Power-up the Extreme. Leave it in its default configuration which is to broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN. Connect the Express to one of the available LAN ports on the Extreme, and then, plug the Express into power.
    Your Mac should shortly "see" the new base station in the AirPort drop-down menu from the OS X menu bar. Select this new station and the AirPort Utility should start up. Use the utility's automated steps to configure the Express to extend the Extreme. Allow the Express to restart.
    Now remove the Express from power, and then, disconnect it from the Extreme. Place the Express in another location in the same room and plug it back into power. Does it eventually give you a green status light?

  • New Airport Extreme, new problems.

    Hi all. I have just purchased and installed a new airport extreme and am having some issues with it already. Last night during install, When it got to the end of the setup process, the computer screen said that the Airport extreme was to restart. Well, that seemed to take forever, and then the airport that was visable from the Airport utility disappeared. The Green light on the unit was on, indicating no problems, but I was not able to access the internet. I played with it for a while, and tried resetting and going through the set up 2 more times, with the same result. I had given up and was going to contact apple in the morning when suddenly my Ipad received a message from my friend who had sent the message about an hour before. I assumed that the internet was now working, which I confirmed with my Ipad and my Imac. All seemed ok. I even downloaded the Airport app for my I pad and could see the device from the screen.
    Today, my Ipad's airport app could not see the device, yet the network was working. Is this typical?
    Also, can you hide the SSID (network name). My last wireless router had this feature, which I thought was nice.
    Last thing. I can't seem to print from my wireless printer any more. My previous router worked fine for this. It now says it is not connected any more. The network name and password are the same with this Airport as my last router, so I figured it shoud work fine. In the manual, it doesn't seem to mention wireless printing, only printers connected to the Airport with a USB. Does it only work that way?
    Sorry for all the questions. If This thing is not going to co-operate, it will be returned to the store. I normally love Apples products, but this one has me scratching my head in doubt.

    First you can block the SSID, you need to go into Airport Utility and click on wireless then click the wireless network options and make sure the Create a closed network is selected.  Regarding the iOS Airport Utility that could have sometimes.  On your printer the Airport Extreme has a USB connector that you can connect a printer to it.  It you want to add the printer to the network wirelessly then you may need to go in to you printer setup. 

  • HT4262 how do I secure my new airport extreme802.11n router and how do I add a wireless printer and my iPad2.  My computer is a HP

    how do I secure my new airport extreme 80211.n.  how do I add my iPad2 and my wireless canon Pixma MG8120B printer
    Thanks

    Did you try to put a lock on it?

  • Setting up New Airport Extreme with Verizon Fios Actiontec MI-424-WR Modem

    I just purchased the new Airport Extreme to run my network at home. My internet provider is Verizon Fios. With their installs, they use an Actiontec MI424WR modem/router. I would like to disable the router part of the Actiontec and use the AEBS for my router. Any advice on how to accomplish this? Thanks.

    ufbrad24, Welcome to the discussion area!
    FiOS does not require a modem. The Actiontec device is a router only.
    You could replace the Actiontec completely with the AirPort Extreme base station (AEBS). Many have discovered that this can be done by a quick call to Verizon.

  • I own an imac 2011 running osx 10.6.8. I want to the new airport extreme. but it says in the system requirements that it needs osx lion 1.7.5 or later. would it work with my older osx 10.6.8?

    i own an imac 2011 running osx 10.6.8. I want to buy the new airport extreme but it says in the system requirements that it needs osx lion 10.7.5 or later. would it work with my older osx 10.6.8?

    In order to set up and install the new AirPort Extreme:
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
    would it work with my older osx 10.6.8?
    Yes, if you set up the new AirPort Extreme using the guidelines above. The 10.6.8 Mac will be able to connect to the AirPort Extreme, but it will not be able to make any configuration changes.
    Only the devices listed above can be used to set up and make any changes to the new AirPort.

  • New Airport Extreme  - can't see old Airport Express

    I've succesfully installed my new airport extreme but the old airport express is not visible anywhere. What is the procedure to connect it to the network?

    Do a factory reset. Unplug the Express, take a paper clip or ball point pen, depress the reset button and hold it in while you plug your Express back into a power outlet. The light will blink green a couple of times and then blink amber rapidly. When the amber light stop blinking and stays solid, you can release the reset button. Give it s a few minutes to recycle. Then open Airport Utility (I assume when you say that you installed your new Extreme you mean the 802.11n. If you mean the Extreme g, use Airport Setup Assistant. Once it opens it should scan and your Express will show up with its factory ID. You can use the Utility to set it up.

Maybe you are looking for