How do I install a program and assign it to one user?

I would like to avoid that all installations, for example a VPN client, is visible for all users.

mende1 wrote:
Apple used to put a "special" Applications folder inside every user's folder…, but note that you can run them in every user's folder (even if you put the app in the Downloads folder).
If I understand your statement says that another user could run those apps from another user's Applications folder, that would be because when you create the Applications folder, it has default permissions giving the staff group and everyone read access. Get Info on the user's Applications folder and delete the staff group from the permissions list and set everyone to no access. To do so,
Click the padlock at the bottom of the window and authenticate.
Select the staff group line and click the delete ( – ) button.
Select no access from the popup menu next to everyone.
Having done that, no other users will be able to see into the user's Applications folder to run the apps.
For anyone else stumbling across this thread, this applies to the User Applications folder in the user's Home directory, NOT the main Applications folder where all other apps are located. If you change those permissions, you will not have access to any of the apps.

Similar Messages

I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?

In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?

Here is a copy of the error
This means : Installation failed.
Verification of the Adobe Software failed
The product you want to install is no valid Adobe product and seems to be falsified.
HUgo
Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Hugo please turn off your e-mail signature.
If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files. You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
To download a fresh copy of the installation files please see Download CS6 products.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and als

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and also to open it as Administrator as suggested by a friend but it still refuses to work. I need direct help from Adobe but don't know how to get to them on this website as they seem to rely on user forums to advise customers.

WhiteHouse Norm
This question is already being responded to in the following duplicate thread
Premier elements 11 keeps stopping
Please reply in the other thread which has a discussion in progress.
Thank you.
ATR

How to create authority check object and assign to ztcode which is of modu

Dear ,
how to create authority check object and assign to ztcode which is of custom module pool program.its urgent kindly help points rewarded.

Manoj,
You can check with your Basis team to create authorisation object and assigining tcodes to the user profiles.
K.Kiran.

I have purchased indesign suite 6. how do i install this program? Please

i have purchased indesign suite 6. how do i install this program now? Please

InDesign is single product of Adobe's various products, not a suite. But anyway, I presume you purchased it as a download? If so, you'll have a .dmg file. This is a disk image. Double click the file and a pseudo drive will appear on the desktop. There should be an app clearly named as the installer, though it may be one folder deep.

How do I install a program like adobe photoshop from a cd to my computer

How do I install a program adobe photoshop from a cd to my computer

Michelle Willson wrote:
How do I install a program adobe photoshop from a cd to my computer
You've posted your question in the Mac Pro desktop computer forum and all but the most recent Mac Pro's came with a CD/DVD drive built in. Since you have a MacBook Pro, is your question how to install from a CD when you don't have a built in CD drive? If so, one solution would be to get a USB SuperDrive. Or, since many programs require entering some form of validation code, and that's often on the CD or the box it came in, see if there's a downloadable version and use the printed code with that.
If you mean you've got an optical drive but the installation process is not clear, just follow Kappy's and Niel's advice.

This phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

this phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

Have managed to cure it based upon the following information received -
I keep having this problem with iTunes when I try to connect my iPod Touch to iTunes. I keep getting this error message: "This iPod cannot be used because the required software is not installed".
What I did:
Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
I have already done this required step about a hundred times and I am still getting this same error so if you have any idea of what I can do please help.
Solution
I was running the 64-bit version if iTunes, and I did uninstall and re-install just to make sure -- no luck. Turns out there's a really easy solution, I'll spare you the detail of how I figured it out, but if you encounter the same issue, here's the solution:
1) Using WinRAR (or any other decent archiving program), extract iTunesWindows64Setup.exe
2) Right click on AppleMobileDeviceSupport64.msi and choose Properties.
3) Switch to the Compatibility tab and check the "Run this program in compatibility mode for:" box, and select your only option, "Previous versions of Windows", in the drop-down box.
4) Click OK
5) Double click the AppleMobileDeviceSupport64.msi
6) Tell it to Repair your current installation
7) Done!

How can I install free program

How can I install free program to my I pad

You can only install Apps / programs from the App Store App.
You cannot download from the web and install through safari or anything else.
Also only Apps designed to run on iOS (The operating system on iPads and iPhones) can be installed.
Where is this program located???

How can I install a program that comes in a CD when the iMac does not come with a CD entrance?

How can I install a program that comes in a CD when the iMac does not come with a CD entrance?

Another option if you have access to a second Mac with a drive is to connect the two together with the iMac in Target Disk Mode, Transferring files between two computers using FireWire, and installing from the Mac with the optical drive.
OT

I bought Creative suite 5 a few years ago, my computer's hard drive failed, after It was fixed I re installed my program and it now says my Serial number is not valid.

I bought Creative suite 5 a few years ago, my computer's hard drive failed, after It was fixed I re installed my program and it now says my Serial number is not valid.
I'm on the last day of a 30 day trail... it won't take my serial number which is the same one that worked before

Contact support by web chat.
Mylenium

How to create a moveable holiday and assign it to a Holiday Calendar?

Hi Experts,
How to create a moveable holiday and assign it to a Holiday Calendar?
Regards,
Tomesh

Hi Tomesh,
Floating Holidays are created for holidays for which the dates are not decided for the years ahead or dates may changes each year or when a unusual holiday is just introducted for one year.
1.Use transaction SCAL or use the IMG path to the holiday calender.
2.Create a new holiday and select the option " is a movable holiday".
3.Fill in the " public holiday attribute tab" and hit insert date.
4.Fill in the year, month and date for the floating holiday or you could do multiple years at the same time if dates are know and hit create.
5. The new public holiday is created.
6.Assign the new holiday to the holiday calender, while saving you will get a message that " an irregular public holiday is created and being save hit ok. This message will appear in cases when the holiday calender validity and the validity of the floating holiday are matching.
Generate the work schedules and check if th holiday appear in the work schedule.
Award point if useful.
Thanks
Gita

How to create a new UoM and assigning it to characteristic?

Hi,
How to create a new UoM and assigning it to characteristic?
i want to enter cost ( in rupees and laks) against a counter
but for that counter charecteristic required and for taht charecteristic unit of measure Rs and Laks are not defined in the system.
So please help me ....

Hi,
Use T Code CUNI
Enter Unit of Measurement as RS and Text as Ruppes
Commercial and Technical Display is same as RS
Numerator is 1
Denominator 1
Exponent 0
Save
Thanks
Raj

How to debug BDC , Dialog program and Script

Hi all,
Please let me know, how to debug BDC , Dialog program and Script
Thanks&Regards
Devi

SCRIPT DEBUGGING
When we want to debug the SAPSCRIPT, we need to first activate the debugger, we have 2 ways to activate the Debugger.
1) Execute the program RSTXDBUG
2) Go to SE71, from the initial screen enter the form name and press Utilities --> Activate Debugger
When we are in the Debug screen,
3.1) F5 will be debug filed by field, that means if a single line is having 5 fields, if we press the F5 this will do field by field,
3.2) F6 will be line by line, that means when we press the F6, it will debug the line and it will go to the next line. F7 also do the same way
3.3) F8 will be very useful when we have any include statement in the SCRIPT, if any include is there and we press the F5 or F6 then this will go that Include (normally SO10 or any transaction text), then if we want line by line debugging then we can press the F5 or F6, or if you want to execute that in a single shot then press the F8, then the debugger will be executed that include and come back to the Script debugging.
Some times in the script, we may right lengthy lines, if we want to debug that whole line, we have an option called Left/Right, this we will find the Debug screen of the script, there is a Push button, we can make use this button to debug.
We can put the breakpoints in the SCRIPT DEBUGGER also, just press the BREAKPOINT Pushbutton from the debugging screen or press EDIT --> Breakpoint
If we want to debug the print program from the SCRIPT DEBUGGER, just press SHIFT+F7 or EDIT --> ABAP Debugging
If we want to see the Windows which are defined in the forms, just press the Go to --> Form --> Windows .if we want to see the pages go to --> Form --> pages. Here we have an option to see the page wise window also go to --> Form --> page Windows
If we want to see the paragraphs which are defined in that script, press go to --> Styles --> paragraphs.
If we want to see the Character formats which are defined in that script, press go to --> Styles --> Character Strings.
If we want to see the Page formats which are defined in that script, press go to --> OTF --> Page.
If we want to see the Elements which are used in the Script, then press go to --> Text Elements --> Form Elements.
If we want to see the commands which are used in the script, press go to --> Commands --> List
Finally, if we want to exit from the SCRIPT DEBUGING, simply press Debugger --> Exit
DEBUG BDC
ust go into debugging mode and do the BDC step by step, when it comes to the Call Transaction line, check the mode which will be 'N'....Now, overwrite this with 'A' and execute the BDC...It will run in All Screens Mode....
As suggested above the MODE 'A' will do the trick as it takes you to all screens.
Normally MODE N will be defaulted as it will be used for background processing,
Here is a simple tip,
This will be the call transaction part of the program,
CALL TRANSACTION 'IW32' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
I would suggest you to make it like this,
DATA: V_MODE TYPE C VALUE 'N'.
*<In debug mode set V_MODE = 'A' for debugging>
CALL TRANSACTION 'IW32' USING BDCDATA MODE V_MODE
MESSAGES INTO MESSTAB.
This will be very useful because you just need to change the value of the V_MODE at runtime as A for debugging besides it has N which is the default to be used. (i.e. you need not change the code again and again).
This will be very useful when you have to debug some program in QA or PRD servers.
regards,
srinivas
*reward for useful answers*

Reboot the iphone to install a program and has been left all the time with the apple on the screen

reboot the iphone to install a program and has been left all the time with the apple on the screen.
takes so hours without turning away. I can do?

Reset your phone , you wont lose anything. Hold the home and off button down until the apple symbol comes up.

How do i install yahoo messenger and gtalk on my n...

How do i install yahoo messenger and gtalk on my nokia 305.

Nokia's new asha models come up with the chat app pre-installed. Just open Chat from the home menu and add your Yahoo and gTalk accounts there. You can also use Nimbuzz which does the similar work too..
If you're looking for Yahoo Messenger or gTalk for calling, that isn't possible. You can only use the chat from your phone.

How do I install a program and assign it to one user?

Similar Messages

Maybe you are looking for