How do i install airport extreme on a windows pc and route it to another windows desktop?

How do I install airport extreme into a windows desktop pc and then successfully route it to another windows desktop?

The AirPort Extreme Base Station (AEBS) is an Internet router that supports both wired and wireless network clients. You can connect both of your desktop, using either media, to the AEBS for network connectivity.

Similar Messages

How do I connect Airport Extreme in place of Buffalo wireless router in Japan?

How do I connect Airport Extreme to replace current Buffalo wireless router? ISP is StarCat in Japan.

Hello DM1960,
Thanks for using Apple Support Communities.
To set up and configure your AirPort Extreme please follow the steps in the article below:
OS X Mavericks: Set up an Apple wireless device
http://support.apple.com/kb/PH14058
Take care,
Alex H.

How do I install Airport Extreme + Bluetooth 2.0+EDR card on new G5?

I just received the card (Part# MA252G/A) in the mail but have no instructions on how to install it. The Apple website makes it seem like you have to have a BA in computer science to do it, so I'd like to see what's involved before attemting the install myself. Mind you, I've built computers from scratch so I'm inclined to believe I can so this myself with a little help.
Thanks!

Hi Nick -
Installation instructions that accompany cards are often sketchy as configurations can vary considerably from one system to another. If you take a look at the User's Guide that came with your G5 you should find the instructions you need for installing any type of card. In fact, my G5 User's Guide provides specifics for Airport Extreme installation. Check in the Index under 'Installing' & post back with detail if you have any problems. I think you'll find it rather straightforward.
Good Luck |:>)

How to properly install airport extreme?please help

please help me install this airport extreme
i think im doing everything right but i dont know
please help
thanx

When changing ISPs (or networking equipment) it's always a good idea to start from "scratch" in configuring your equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Installing AIrport Extreme card (which one? and WHERE?) in Dual 1.8 G5

I'm having an incredibly frustrating time trying to check out this (used) G5 which I thought, up until yesterday, might replace my G4 MDD. (Never mind that any topic I run a search for on the support.apple website returns NO results. Is it my antediluvian 10.3.9 and Safari 1.x--newest possible for that OS? But I digress...)
I keep running in a circle of Google search results that keep bringing me to a .pdf showing an AE card installation on a single processor G5. While not vividly clear in the illustration, the architecture seems to be different. I don't see the same "landmark" components here as in my G5. My Apple Support search difficulties have frustrated a search for a manual for this model.
Also I'm just now learning of the necessity of the Rube Goldberg-ian additional antenna that seems to be required. (As it sits, the G5 is about 3 feet away from the base station, but I guess I'll have to play along anyway and get one.) Having used an Airport card on a pre-Cambrian white iBook G3 >>>without any bloody antenna<<<, I find this too depressing to be laughable. ("...strain at a gnat and swallow a camel." --NASHVILLE, 1975; Robert Altman, dir.)
I'm under the assumption that this beast came BEFORE the late 2005 makeover that necessitates the Airport and Bluetooth combination card. Please correct if I'm wrong about this.
The card I bought on eBay is Model A1026 EMC No. 1951 (thinking an Airport Extreme Card is an Airport Extreme Card is an Airport Extreme Card...ain't that rich!)
Computer is YM425(XXXXXX) 1.8 GHz DP/256MB 400 80GB/SD/G5200/56K
I did the installation of the Airport (after having uninformedly bought an AE card first) card on the iBook, but I can't begin to see where one goes on the G5 desktop. I don't even see the connector cable that goes in the back of the card.
I feel like my good intentions have landed me at Alice's tea table while hardly being on the cutting edge of anything. I'm a sheet of paper's width (see below) from just jettisoning this thing back to Craigslist whence I fetched it.
(Although I've long waved the banner of "Think Different" superiority, I'm beginning there's not a sheet of paper's width of difference between the respective byzantine frustrations of Planet Jobs and Planet Gates. At least I didn't make the pricey leap all the way into the MacPro rabbit hole...)
To sum up: which AE card, where does it go, what else isn't Apple telling me and are there any specific links?

Hi, and a Warm Welcome to Apple Discussions and the Power Mac G5 Forum!
From the details you have given, your G5 requires the Airport Extreme! card
http://store.apple.com/Apple/WebObjects/ukstore?productLearnMore=M8881
The installation instructions are here
http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
The antenna cables and connectors are pre-installed in G5s. The Airport Extreme! antenna connector, with the brass tip, is shown clearly if you click on photo #4 here
http://tersus.no/bluetooth/
(They are the Bluetooth instructions - the photo is for identification only)
You will need an antenna
http://docs.info.apple.com/article.html?artnum=86413
which should have been in the G5 packaging (originally) - but can usually be picked up on eBay - or here
http://www.mac-pro.com/Airport-Extreme-External-Antenna-for-Power-Mac-G5-Tower?s c=2&category=7286
if not.
There is a G5 manual here
http://manuals.info.apple.com/en/PowerMacG5_UserGuide.pdf
Please post again if you have any questions. Good Luck.

How to get an Airport Extreme to work behind a wired Router????!!!!!!

Hey all major issue I am at my inlaws and they have a cable modem going into wired linksys router in their basement where the cable comes in and then distributing out through the house ethernet to key areas. Recently they have gotten wireless laptops and want to setup their airport extreme off of one of these ports so they can sit out on their deck and use the net.
I tried the auto-configuration and get no internet connectivity, occasionally it comes through at like 4 k/s(using the WAN port, the Lan port gives no connection like it should). If I plug directly into the same port I get 8MB down and 1MB up, so I am confident its not the ethernet coming to the location.
Additionally, if i take the extreme downstairs and run it form the cable modem and do the autosetup it works beautifully as well.
So obviously the autosetup isnt working for the Airport running behind the router why? I have tried to muss with the settings, run it in bridge mode and such but to no avail.
Any advice on how to do this? The base is updated to its latest firmware 5.7.

I have been using an AEBS connected to one port of my D-Link Router for years. 2 months ago I have upgraded to OS 10.5 and have had no problems with having wireless computers connecting. I just decided to change my Security to WPA and after the Airport Utility (V.5.3.2) did the settings UPDATE, I haven't been able to connect via WIFI. I had all WIFI IP address be in the 10.0.1.1 range, and now I have tried everything I can think of to get it to work like I did but no luck.
I should mention that my router is set for static IP because of webcasting and other requirements.
I have searched and asked and can't solve the problem.
Mike

How to install AirPort Extreme card in eMac?

I just recently acquired a 2005 G4 eMac (the top-of-the-line model with the SuperDrive and 160 GB hard drive), and I am trying to install an AirPort Extreme card into it. Apparently I think the instructions must differ from this one:
http://support.apple.com/kb/HT2596
Since this is for the older AirPort cards.
I pushed the card in all the way, logo facing downward, screwed in the antenna, etc., but the Mac still won't recognize it! What should I do to get it working?

Numerous eMac users who installed Airport Extreme cards in the past have brought up that the Extreme card is a very tight fit in the eMac Airport slot, especially compared to the original Airport card. Often, the card appears to be fully seated, but is actually some fraction of a millimeter out. After seating the card according to all the instructions, you have to push hard on the edge of the card to get it to really seat all the way, hard enough to just start to push the 50-lb eMac away from you (don't try this with the eMac on the very edge of the table or desk!). I ran into exactly that putting an Extreme card in my in-law's eMac, and I had already read other's warnings; that may give you some idea how firmly you really need to push the card once it feels as if it's seated.

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

How do I reset Airport Extreme Model A1034?

How do I reset Airport Extreme Model A1034?
I am using a MacBook Pro to set up the airport, but, I get this message:
"This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information."

You would download and install AirPort Utility on the PC.
For Windows 7 and above.....use AirPort Utility 5.6.1 for Windows - Support - Apple
For XP SP3 and Vista SP2......use AirPort Utility 5.5.3 for Windows - Support - Apple
For XP SP2 and Vista SP1......use AirPort Utility 5.4.2 for Windows - Support - Apple

I have already installed airport Xtreme as a base station and airport xpress as amplifier of signal. problem is I couldnt make them talk. Extreme is working properly and Xpress is flashing ambar.

i have already installed airport Xtreme as a base station and airport xpress as amplifier of signal. problem is I couldnt make them talk. Extreme is working properly and Xpress is flashing ambar.

Please describe whether your two AirPort base stations are both 802.11n-capable. Also describe how you configured them. Did you configure the AirPort Extreme to "allow this network to be extended"? Did you configure the AirPort Express to "extend a wireless network"?

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How can I use Airport Extreme just as a file server - no wifi

I'm setting up a new Apple environment for an invalid music buff. Here are the components, all newly purchased.
MacBook Pro
Airport Extreme
Airport Express
I was handed a G-Drive with a large iTunes file collection on it.
The user will have Comcast as his network provider and he already has a Comcast wireless router, so none of the Apple devices will need to be used as a wireless router or base station (assuming I understand what Apple means by a "base station").
The Airport Express has the primary function of acting as an AirPlay device, feeding an analog music signal to the user's hi-end audio system (Denon integrated amplifier, Thiel Loudspeakers).
The Airport Extreme has the sole function of acting as a network file share for the G-Drive.
The MacBook Pro will operate iTunes and will get its music files from the network shared G-Drive and send it to the AirPlay device, which will feed the music signal to the hi-end audio system.
I am able to get the Airport Express to simply act as a wireless client on the Comcast provided wireless network. The MacBook Pro is also on the network and can see the Airport Express as an AirPlay device and send music to the audio system.
What I'm having problems with is getting the Airport Extreme to simply act as a file server on this LAN. It can either work in bridged mode and just be a wireless network client, or I can readily run an ethernet cable from the Airport Extreme to the Airport Express, or even to the Comcast router.
I tried to connect the MacBook Pro to the Airport Extreme with an ethernet cable and get it to "join an existing network", but it refused to recognize the Comcast provided network. All it could see were some networks in homes nearby.
I was hoping that if I just ran a network cable between the Airport Extreme and the Airport Express, that it would just get a network address over DHCP through the Airport Express. Nope.
So I'm stuck. How do I get the Airport Express to simply act as a file server for the G-Drive on my LAN?

+Can I use the Airport Extreme base station as a wired router, with wireless disabled for the time being?+
Sure, but it will probably take just as much time...a few minutes....to turn the wireless off than simply change the name on the default wireless network to your personal choice.
The AirPort Extreme is pre-configured to create a wireless network when it is hooked up to a modem. All you need do is assign a name to this network and establish a password. If you don't want to do this, you can turn the wireless off and use the device as a wired only router.
AirPort Utility, the application that is used to setup the AirPort Extreme has a simple guided step by step process for you to configure the device the way you want.

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal?

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal? What equipment & devices do I need to travel with to make this possible?

You may mean the AirPort Express.....not AirPort Extreme.....as the Express is a popular travel router.
The whole idea behind using this device is that the hotel must provide an Ethernet jack in the hotel room. Then you connect the AirPort Express to the Ethernet jack with an Ethernet cable and configure it to provide your own wireless network in the room. You still have to agree to terms, pay the fees, etc.
The problem with this approach is that it is getting very difficult to find hotels in North America that prrovide an Ethernet jack....most have moved to wireless networks and the others are not far behind.
So, if the hotel is already providing a wireless signal, the AirPort Express is of no use in that situation.
If you normally stay at the same hotels, and know that they provide Ethernet ports, an AirPort Express might make sense in terms of convenience.

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.

How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.

You can set up daily time limits for each computer that connects using wireless, but it is not possible to do this when a computer is connecting directly using a wired Ethernet connection.
Open Macintosh HD > Applications > Utilities > AirPort Utility on your Mac and click Manual Setup
Click the Access Control tab below the icons
Select Timed Access
For more details on this, click the Help menu at the top of the screen and enter the following phrase into the search box:
Controlling access to your wireless network
A more sophisticated approach would be to use a service provided by OpenDNS. From your computer, this would allow you to monitor web sites visited, and block any unsuitable sites. More info is here:
http://www.opendns.com/landings/familyshield

How do i install airport extreme on a windows pc and route it to another windows desktop?

Similar Messages

Maybe you are looking for