How Do I Install and Uninstall the GPIB Driver on
When I use GPIB as interface, I meet the problem "GPIB-32.DLL is either missing or damaged." In order to solve the problem, I need to uninstall all GPIB software, including NI-488.2 and reinstall NI-488.2. How can I do that. Thanks
One more suggestion. Can you find your gpib-32.dll file, if it still exists. It should be located under the system directory "C:\Windows\system32" (for 32-bit systems). From there, right-click on the file and select properties. In the properties you can go to version»company or digital signature and it should display a company name. I would be curious to see who made the dll. If another dll with the same name got copied over this one it may give you the same error that you are receiving.
Regards,
Steven Zittrower
Applications Engineer
National Instruments
http://www.ni.com/support
Similar Messages
-
after downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring. I do not know how to fix this problem so I always return to the old version.
If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
How can I install Itunes in the data drive and not in OS partition?
My PC has a 3 partitions and I hace installed Itunes in the OS partition, very small. How can I install Itunes in the data drive?
See Williams Lloyd's post > https://discussions.apple.com/message/15670671#15670671
-
I have tried to access the itunes store by many different means. I know I have account balance as I put in 2 gift cards back in March and have not used them all. I recently installed and uninstalled itunes several times but I still cannot open it on my computer. When plugging in my ipod shuffle it does not automatically load either although my computer says it's working correctly.
Click on the "Start" button. Click "Run." Type the word "cmd" in the open box. When the DOS screen comes up, type "netsh winsock reset." Press "Enter." Type "exit" to close the DOS window and go back to Windows.
Restart the computer.
Read more: http://www.ehow.com/how_2125133_do-winsock-reset.html#ixzz2kyccghec -
Need AD Account for Only Install and Uninstall the App (exe)
Hi Team,
Anyone can help us for our below query?
we are planning to create an account in AD for Application(EXE) installation and un-installation.
Important : That ID should not have any other Privilege.
is it possible to create in AD ?
Thanks and Regards,
Dhinesh P
Dhinesh P> we are planning to create an account in AD for Application(EXE)
> installation and un-installation.
> Important : That ID should not have any other Privilege.
Impossible... Application maintenance (install/patch/uninstall) requires
administrator privileges for most applications.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
How do i install and use the lacie hard disk
i bought the 1TB Lacie Rugged Hard Drive because I have run out of disk space on my Mac desktop. Once I plug it in, I can't seem to format it for the Mac and then use it to transfer my iPhoto library from my desktop to the Lacie Hard drive. Please help! Thanks.
I went into Disk Utility and into Erase and selected Mac OS Journaled and hit "Erase" (I hope that wasn't a big mistake.)
... it was only a mistake if the LaCie drive has multiple partitions on it. Sometimes they have a utiliy partition that I like to remove.
Then when asked whether I wanted to use Time Machine to back up everything on my Mac, I hit "yes". (I hope that wasn't a big mistake.)
... it was only a mistake if you didn't want TimeMachine to use it.
So now the Lacie image on my desktop has turned from orange to green (Time Machine?) and is backing up 700,000 things. . .I just want to free up space on my Mac so I was thinking of moving my iPhoto library from my Mac over to the Lacie Hard Drive. Will I be able to still do that, given what I just did above? If so, do I just drag the iPhoto library icon onto the green (Time Machine?) icon on my desktop?
... if the LaCie has enough space this should be fine. You might run into problems later when TimeMachine starts to fill up your drive; iPhoto might start giving you errors if there isn't enough freespace. -
How do I install and work the speaktext for ebooks app?
I just downloaded the speaktext for ebooks, and I'm haveing a hard time understanding the instructions. I want this app to read the book while I'm doing something else.
I went into Disk Utility and into Erase and selected Mac OS Journaled and hit "Erase" (I hope that wasn't a big mistake.)
... it was only a mistake if the LaCie drive has multiple partitions on it. Sometimes they have a utiliy partition that I like to remove.
Then when asked whether I wanted to use Time Machine to back up everything on my Mac, I hit "yes". (I hope that wasn't a big mistake.)
... it was only a mistake if you didn't want TimeMachine to use it.
So now the Lacie image on my desktop has turned from orange to green (Time Machine?) and is backing up 700,000 things. . .I just want to free up space on my Mac so I was thinking of moving my iPhoto library from my Mac over to the Lacie Hard Drive. Will I be able to still do that, given what I just did above? If so, do I just drag the iPhoto library icon onto the green (Time Machine?) icon on my desktop?
... if the LaCie has enough space this should be fine. You might run into problems later when TimeMachine starts to fill up your drive; iPhoto might start giving you errors if there isn't enough freespace. -
How can I install something on the D:\ drive?
Hi! Very very simple question.
I would like to create installer within LabVIEW 8.5 and add some file which should be installed on the D:\ drive on the target machine. I see a lot of predefined folders, but how can I add D:\ as destination???
many thanks in advance
Andrey.
PS
I know, its stupid question, especially after six years experience with LV...Press the plus sign to add a directory.
Select the file and the destination.
Message Edited by andre.buurman@carya on 11-01-2007 04:38 PM
Message Edited by andre.buurman@carya on 11-01-2007 04:39 PM
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)
Attachments:
App builder new dir.PNG 24 KB
App builder new dir select.PNG 28 KB -
How do I install bootcamp on the new drive that I installed with the dvd drive adapter
Hello, I have a macbook pro mid 2012 13 inch, I have just earned some money, enough to buy a SSD, and I happily went to the store and bought a samsung evo 840 120gb SSD. My plan was to clean install windows 8.1 on the SSD, I already had bootcamp on the 500GB HDD with windows 8 that came with the mac, so I backed up the important files from the windows partition. I deleted the partition, and restored it to the mac's partition (which I was going to partition again after the windows installation is complete for the storage for my windows partition) I made a installation usb with the iso I have made with bootcamp assistant, and waited. After that was done I restarted my computer holding the option key, then I booted into the EFI boot partition, and went through the process, entered the serial key, and agreed the thing, and then when I did the format it said it couldn't do it, so I took it out put it in an external hard-drive case, then I plugged it into my windows 8 laptop, then I opened command prompt, then I typed "diskpart", then after the administrator thing popped up, I clicked yes, then in the diskpart prompt, I typed in "list disk", and my SSD was disk 1, so I did "select disk 1" then I typed "clean" Then I went into the drive manager, then a thing popped up saying which one would I choose between MBR or GPT so I selected GPT, then made a new NTFS partition on the SSD, then took it out, then I popped it back in then went through the installation, until the actual installing part where after copying files is done, this pops up "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code 0x8007045D" So I downloaded a torrent because I had thought that this was corrupted, and downloaded a torrent from a website, and downloaded the iso, and I tried and the same error, again and again of taking out the drive from my computer to format it and putting it back in again (since there was some files made on the SSD) so I had decided that I would download a windows 8 torrent, then I did then it couldn't even start, so I want to install windows 8.1 on my macbook pro, on a separate drive in the the DVD cage (not external, internal), would there be any way to do it, please help!
Specs:
Macbook Pro Mid-2012
OSX 10.8.5
i5-3210m
Samsung 2x4GB 8GB RAM (Dual Channel)
Hitachi 500GB (comes with it) in the normal hard drive cage
Samsung EVO 120GB SSD in the DVD cage1. The disk layout in OSX Disk Utility.
2. Choosing the Free Space partition.
3. Executing the installer
4. After the installation, from W8.1 Disk Management.
5. On a soon-to-be-released OS, diskutil list before and after W8.1 EFI installation.
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *256.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 128.7 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS OSY-MBP13 *128.3 GB disk1
Logical Volume on disk0s2
AFB7276E-51EF-478F-98A1-47D941BD9843
Unencrypted
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *256.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 128.7 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Reserved 134.2 MB disk0s4
5: Microsoft Basic Data 126.4 GB disk0s5
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS OSY-MBP13 *128.3 GB disk1
Logical Volume on disk0s2
AFB7276E-51EF-478F-98A1-47D941BD9843
Unencrypted -
^______________________________^^^____________________________________^
What can i do.., btw im a bit of a newby for this stuff!The grey installation DVDs supplied with Macs are specific to the computer they are supplied with. They cannot be used to install on any other Mac.
Either erase and install the OS on the old MB from it's own grey DVDs, or go and buy the retail Snow Leopard installation DVD ($29 in the US, £26 UK). -
How do I install and configure the Java Access Bridge?
I've just installed the Oracle 9i database on this Windows 2000
Pro box with a view to learn what there is to learn about
Oracle. I need to install the Java Access Bridge so that I can
access the Oracle applications. I use a screen reader called
JAWS from Freedom Scientific.
Can anyone please tell me how to install the necessary Access
Bridge components and how to configure things accordingly so
that adaptive software will work correctly with the Oracle
applications.
AdrianYou can do all the networking stuff you need by setting a "bridged" adapter in the VM setup, then configure a valid IP in your guest OS, probably using the same gateway and name servers similar to your host OS.
If you you cannot use a bridged mode adapter because your host network does not support another network card, you can configure a NAT and a host-only adapter in the VM setup as following:
When you configure the network device that corresponds to the NAT device on the on the guest side, set it up to obtain the IP address via DHCP. The NAT device is for outgoing connections to the internet only. VBox will not provide any routing from the outside network to interface behind a NAT device, only via it's own internal DHCP routing.
The host-only adapter is only good for connection between the host and the VM guest. It is primarily designed to provide DHCP like the NAT interface, but does allow a manual configuration, by customizing the "vboxnet0" configuration in the Vbox Network preferences. By default, the IP address range 192.168.56.1 to 192.168.56.100 can be used for manual IP configurations.
It was not mentioned in your requirements, but you need a bridged mode adapter if you want to connect to your guest VM from any other machine beside your host system, e.g. local LAN. -
How can I install and run the Java Telephony API
Hello!
I have downloaded the Java Telephony API but I couldn't find the installation notes for installing it on my PC (Win2000).
Can anyone help me?Since the package is downloaded as just .class files just set your classpath like you normally would if you were creating your own package...I personally would install the class file version...run a sample program and see if this works...
-
How To: Identifying and locating the correct driver for your device
I have a Toshiba L50-A and recently had a problem with my Brother mfc-J220 printer, could not print anything. I first tried to download the drivers for my Brother printer device but didn't work. I was told it was because there was a missing driver in my Toshiba laptop related to printers?, but cannot see where I might be able to download these. Another person mentioned I should re format my Toshiba back to factory set and I would be able to recover these drivers?
Help! :-) could someone give me a "heads up " with this please?
ThanksWhich Satellite L50-A? There is a label on the bottom.
All-in-One / Multi-Function MFC-J220
Tell us more about what happened. "Didn't work" doesn't tell us anything.
-Jerry -
How can I download itunes when I get the following errors ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
Any help greatly appreciated.
billymacGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same
jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.
Maybe you are looking for
-
To get the list of queries in which a particular variable is used - urgent
Hi Friends, I have a list of variables which were used in some queries, now I need to know list of queries in which the given variable is used. for example: There is a variable called ZVBASMNT and used in some queries, I want to get the names of the
-
When I try to save a PDF file I get an error message that says: The document could not be saved. There was a problem reading this document(23). I am able to save on one of my computers but not the other. Can this be fixed?
-
LaserJet Pro 200 Color MFP M276mw
I am having issues installing the main driver for this printer and it won't complete without it. I have tried using Firefox for the driver download and nothing is working. I have installed straight from the CD, by just connecting and a variety of oth
-
Itunes app crash when downloading purchases in windows 7 64 bit
Hi guys I have recently upgraded to windows 7 64 bit. My I-tunes works fine until I try to download a purchase. As soon at the download starts I get an app crash error and I tunes closes. I turned off my anti-virus and that did not help. Here is the
-
Photos not appearing in view window
I have located all my photos on an external HD....well over a year ago. Never had any issues. Today I log on to do some work, and all of a sudden, where every photo should be in iPhoto viewer is a blank space....around 6500 library pics! I've re-boot