How do I install and work the speaktext for ebooks app?

I just downloaded the speaktext for ebooks, and I'm haveing a hard time understanding the instructions. I want this app to read the book while I'm doing something else.

I went into Disk Utility and into Erase and selected Mac OS Journaled and hit "Erase" (I hope that wasn't a big mistake.)
... it was only a mistake if the LaCie drive has multiple partitions on it. Sometimes they have a utiliy partition that I like to remove.
Then when asked whether I wanted to use Time Machine to back up everything on my Mac, I hit "yes". (I hope that wasn't a big mistake.)
... it was only a mistake if you didn't want TimeMachine to use it.
So now the Lacie image on my desktop has turned from orange to green (Time Machine?) and is backing up 700,000 things. . .I just want to free up space on my Mac so I was thinking of moving my iPhoto library from my Mac over to the Lacie Hard Drive. Will I be able to still do that, given what I just did above? If so, do I just drag the iPhoto library icon onto the green (Time Machine?) icon on my desktop?
... if the LaCie has enough space this should be fine. You might run into problems later when TimeMachine starts to fill up your drive; iPhoto might start giving you errors if there isn't enough freespace.

Similar Messages

  • How do I install and configure the Java Access Bridge?

    I've just installed the Oracle 9i database on this Windows 2000
    Pro box with a view to learn what there is to learn about
    Oracle. I need to install the Java Access Bridge so that I can
    access the Oracle applications. I use a screen reader called
    JAWS from Freedom Scientific.
    Can anyone please tell me how to install the necessary Access
    Bridge components and how to configure things accordingly so
    that adaptive software will work correctly with the Oracle
    applications.
    Adrian

    You can do all the networking stuff you need by setting a "bridged" adapter in the VM setup, then configure a valid IP in your guest OS, probably using the same gateway and name servers similar to your host OS.
    If you you cannot use a bridged mode adapter because your host network does not support another network card, you can configure a NAT and a host-only adapter in the VM setup as following:
    When you configure the network device that corresponds to the NAT device on the on the guest side, set it up to obtain the IP address via DHCP. The NAT device is for outgoing connections to the internet only. VBox will not provide any routing from the outside network to interface behind a NAT device, only via it's own internal DHCP routing.
    The host-only adapter is only good for connection between the host and the VM guest. It is primarily designed to provide DHCP like the NAT interface, but does allow a manual configuration, by customizing the "vboxnet0" configuration in the Vbox Network preferences. By default, the IP address range 192.168.56.1 to 192.168.56.100 can be used for manual IP configurations.
    It was not mentioned in your requirements, but you need a bridged mode adapter if you want to connect to your guest VM from any other machine beside your host system, e.g. local LAN.

  • How can I install and run the Java Telephony API

    Hello!
    I have downloaded the Java Telephony API but I couldn't find the installation notes for installing it on my PC (Win2000).
    Can anyone help me?

    Since the package is downloaded as just .class files just set your classpath like you normally would if you were creating your own package...I personally would install the class file version...run a sample program and see if this works...

  • How Do I Install and Uninstall the GPIB Driver on

    When I use GPIB as interface, I meet the problem "GPIB-32.DLL is either missing or  damaged."  In order to solve the problem, I need to uninstall all GPIB software, including NI-488.2 and reinstall NI-488.2. How can I do that. Thanks

    One more suggestion. Can you find your gpib-32.dll file, if it still exists. It should be located under the system directory "C:\Windows\system32" (for 32-bit systems). From there, right-click on the file and select properties. In the properties you can go to version»company or digital signature and it should display a company name. I would be curious to see who made the dll. If another dll with the same name got copied over this one it may give you the same error that you are receiving.
    Regards,
    Steven Zittrower
    Applications Engineer
    National Instruments
    http://www.ni.com/support

  • How do i install and use the lacie hard disk

    i bought the 1TB Lacie Rugged Hard Drive because I have run out of disk space on my Mac desktop. Once I plug it in, I can't seem to format it for the Mac and then use it to transfer my iPhoto library from my desktop to the Lacie Hard drive. Please help! Thanks.

    I went into Disk Utility and into Erase and selected Mac OS Journaled and hit "Erase" (I hope that wasn't a big mistake.)
    ... it was only a mistake if the LaCie drive has multiple partitions on it. Sometimes they have a utiliy partition that I like to remove.
    Then when asked whether I wanted to use Time Machine to back up everything on my Mac, I hit "yes". (I hope that wasn't a big mistake.)
    ... it was only a mistake if you didn't want TimeMachine to use it.
    So now the Lacie image on my desktop has turned from orange to green (Time Machine?) and is backing up 700,000 things. . .I just want to free up space on my Mac so I was thinking of moving my iPhoto library from my Mac over to the Lacie Hard Drive. Will I be able to still do that, given what I just did above? If so, do I just drag the iPhoto library icon onto the green (Time Machine?) icon on my desktop?
    ... if the LaCie has enough space this should be fine. You might run into problems later when TimeMachine starts to fill up your drive; iPhoto might start giving you errors if there isn't enough freespace.

  • MY Ipod touch will say it is connected to the wi fi, but when I try and use the wifi for an app it say there is no internet connection.

    My Ipod touch 4.2 will say it is connected to the wi fi but when I try and use it with an app it says it is not connected to the internet

    - Do other devices successfully connect to the network?
    - Did the iPod successfully connect to this network before?
    - Does the iPod successfully connect to other networks?
    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    -iOS: Troubleshooting Wi-Fi networks and connections

  • HT5622 How do I return and get a credit for an app?

    Need Help

    For each app the App Store has a link to the developer's web site.
    Purchases from the App Store are final. You will need a very good reason to cancel a purchase.
    If there is a problem with an app you bought, check your Purchase History. There should a link to "Report a problem" wit the recently bought apps. Use that lin to contact the support:
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers

  • How can I print the tutors for numbers app, and how many pgs are there

    can I print out a hard copy of tutor for numbers that I have purchased. If so about how many pgs are there-thks

    Ask the Tutor for Numbers app developer >  Contact Us - Noteboom Productions

  • How to install and configure the SQL Server

    Hi All,
    We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
    Kind Rgds,
    Steve

    Hi,
    Try this solution:
    The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
    Below are some important parts that you should pay attention to during the Installation process.
    Resolution
    Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
    Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
    Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
    Rgds,

  • My Pro Tools program was damaged by the Creative Cloud system. I was invited to install and try the Cloud,but it did me a great dis-service and has set me back in Production and personal time trying to get my pro Tools working again. I am really disappoin

    My Pro Tools program was damaged by the Creative Cloud system.
    I was invited to install and try the Cloud,but it did me a great dis-service and has set me back in Production and personal time trying to get my pro Tools working again. I am really disappointed and would like you to advise me how to restore my program to its working state. I am in a traumatic state since I have Artistes life work being processed in the Pro Tools 9 Program. Help! Help! Please.Ps. I tried reinstalling the software from the Disc....Still NOT working.

    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • How to install and work with oracle webcenter 11g

    Hi
    Will please guide how to install and work on oracle webcenter11g, i am fresher in oracle that's why. so please guide me
    Regards
    Rajesh P

    In order to create and develop a webcenter portal application, you only need to install JDeveloper and download the WeBCenter extensions. That's true.
    But this install does not include the WebCenter services like dicussions, document services, analytics,... If you want to use these and integrate them in your portal, then you would need to install the suite as described on my blog.

  • How to install and working Eclipse Visual Editor

    How to install and working Eclipse Visual Editor

    GEF (graphical editing framework.)
    download and install the plug-in. it should help.

  • Since installing Firefox 4 Beta 5, the Add-Ons manager is empty. My add-ons still appear to be installed and working, but I can't install more, or uninstall, or configure them.

    My add-ons still appear to be installed and working, but I can't install more, or uninstall, or configure them.

    Try forcing Firefox to rebuild the list of installed add-ons.
    # Open the profile folder, for details of how to access it see the [[profiles]] article.
    # Close Firefox, then delete extensions.sqlite (you can also delete extensions.cache, extensions.ini, extensions.rdf if they exist)
    When you restart Firefox the list of installed add-ons should be rebuilt.
    If that did not work, you may have an add-on that is causing the problem, try the options in the [[troubleshooting extensions and themes]] article.
    If you type '''about:addons''' into the location bar does that bring up the list of add-ons? I have seen a blank add-ons list if Mr Tech Toolkit add-on is installed, accessing the add-ons manager by typing about:addons in the location bar is a workaround with that add-on installed. The author of that add-on is working on an update.

  • In my macbookpro airport showing as uninstalled.  How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

    In my macbookpro airport showing as uninstalled.  How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

    jeanfromisle-arné wrote:
    I'm new to MacBook Pro.
    My system is Mac OS X v.10.6.8.
    I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
    Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
    Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
    Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
    where do I find the exact version (in french)
    For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

  • I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

    I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon for that event is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

    a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card --  I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

Maybe you are looking for