How do i install d110 printer solution center software so it will actually run like is supposed to?

I have been battling this issue for six months with no end in sight!!! I have 3 ACER laptops with Windows 7 Home Premium and an HP Photosmart D110 printer. I installed the software onto all 3 systems and they worked great (for about a month). One of the laptops is still running HP Solution Center very vell but the other 2 allways give me the message that software did not install successfully and the install process does not "find" the wireless printer. I have uninstalled and insalled the software about 25 times with no success even after following the so-called solutions posted by the experts. One of the laptops was returned to Acer for a bad hard drive and when it was returned with a clean Win 7 install, I attempted to install the D110 again (same problem). I can print from all of the laptops but I'm only able to use Solution Center from 1 of them. Any other suggestions before I throw the printer and software disc into the trash? With all of the issues that I've seen on the forums concerning HP printer software, I would think that someone in power at HP would get to the bottom of these issues and patch their software.

Hello raider7
I have some questions that will help with troubleshooting.
What kind of firewall and antivirus software do you use on the laptops? Are they all the same laptop models?
Does your printer have a static IP address set?
Does the software fail when it comes to locating the printer on the network or does it state "The software installation is not complete" when you try to run Solution Center after installation?
If you could, please summarize any troubleshooting you have already done. Did the HP Print and Scan Doctor give any errors or indicate a problem? http://www.hp.com/go/tools
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Similar Messages

Need HP solution center software for hp psc 2110 running windows 7 32 bit

Hi,
The HP Solution Center Software has disappeared since I upgrade my HP laptop OS from Vista to Windows 7 32 bit. I use the HP Solution Center Software for years to create .pdf documents from the scanned documents of my HP PSC 2110 All-in-One printer.
Can you provide the link to download the HP Solution Center Software for Win 7? I searched the HP support website using the product name HP PSC 2110, it pointed me to the driver section; I followed the instructions however there is no link to download the the software.
The printer is connected via USB and works well. It is just annoying I cannot use the HP Solution Center Software (previously HP Director) to copy scanned documents to my computer.
Thanks.
This question was solved.
View Solution.

You are welcome.
You may download it from the following link:
http://sourceforge.net/projects/naps2/files/3.0b1/naps2-3.0b1-setup.exe/download
That means that as an older model its functionality is limited but there are some workarouds available. it surely worth trying.
For a Wirelss printer you will need a different printer indded, there are many factors to consider and recommend you any specific printer, do you have any specific needs? for example would you use a fax or not, I assume it should be a color printer with a scanner... do you use to print photos or use it more often for a daily printing and scanning capabilities, those factors may highly affect any possible recommendation so further clarification will be helpful.
Regardless, any current HP device with a scanner fully support scanning PDF scanning within the HP Software.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I don't have my disc to install hp6310 how can i install my printer without it

how can I install my printer without my disc
hp6310

Hi,
On the link below, select 'Software and Driver Downloads', select your operating system and then download the Full Feature installer.
http://h10025.www1.hp.com/ewfrf/wc/product?product=1119598&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I install custom printer profiles in Mac os mountain lion. I can.t fine the icc profiles directory (if that's what it is).

How do I install custom printer profiles in Mac os mountain lion. I can't find the icc profiles directory (if that's what it is).

NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder. You'll need to do it again after each system update that's applied.
OT

HP Solution Center Software

Hello.   First time post here and have a question.
I have an HP Photosmart 7280.   I have been using this printer for 5 or 6 years.   Have always been happy with it.
I just had to upgrade my desk top computer because of some problems. This upgrade included new hard drive and mother board, consequently also requiring a download of printer software. My upgraded computer is usisng Windows 7. I already have a laptop windows 7 with the HP Solution Center software.
My problem is t hat the new download of the HP software has a major change. No longer is automatic 2 sided printing supported.   All that is supported is manual, left booklet and right booklet. This is not good. In fact it is not acceptable.
Does anyone know how to get the version of HP Solution Cent er Software that has two sided printed supported.   I know this is a recent change because my laptop had this version of the software.
George

Hi George,
Duplex pritning is supported, however disabled by default:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available again.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP OfficeJet 6600 H711g HP Solution Center software for Windows 8.1

I have an HP Officejet 6600 H711g printer. No installatin discs were included with the printer. I downloaded the installation files from the HP website. However, apparantely the HP Solution Center software was not included in the installation files. The HP Solution Center shortcut is located on my desktop but when I access it i get a message that my instalation is not complete. I have tried downloading and installing again (without uninstalling current files) but the Solution Center is still not available. Can somone please help. I'm not sure where to go from here.
Thank you
This question was solved.
View Solution.

Hi,
The HP Solution Center is not a part of the software for the HP Officejet 6600, it is a part of your previous HP printer's software.
From the windows 8 screen type HP and open the HP Officejet 6600 software, the HP Printer Assistant which is the software for your current printer will launch.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Adding a 2nd device to the Solution Center software

I have and Officejet 6500 with the Solution Center software. How can I add another HP printer to the software? At one time they both showed up, but I had problems with the driver and when I reloaded it, the second printer was gone and hasn't come back.

Hi,
Since this printer uses a different software it cannot be added to solution center.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

I have A PhotoSmart C 6180. I can't get the Solution Center software

Where can I find something that will download on 64bit Vista for thePhotoSmart C6180? My harddrive was replaced and my backup did not include the printer drivers. I have loaded everything and it prints fine, but I can not scan as the Solution Center is missing. It says that if the printer is prior to 2011 that the center is not available and the disc won't load on 64bit.
Is there a patch or something that can make this work
This question was solved.
View Solution.

Hi,
if you use the pritner through a USB connection, open the Control Panel and select Printers, right click any instance of the printer and Delete it.
Next unplug the USB and reboot your PC prior installing the printer. (For network connection simply skip to the next step).
Next download and install the following software by following the steps on screen, that will add full functionality as the HP Solution Center software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-47461-2&cc=us&dlc=en&lc=en&...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Q190 and Lenovo Solution Center Software

Is the latest available Solution Center Software compatible with--or intended to be used on--the Q190 "entertainment" PC? My version says I need a driver update, bu they are all current.
The only download source I can find within Lenovo does not list the Q series computers as compatible--yet an earlier verson of SC came preloaded on the machine.
Thanks for any available insight.

Hi Z34jcm,
Welcome to Lenovo Community Forums!
I’m sorry to inform you that the LSC (Lenovo Solution Center) is not available for Q190 Desktop. Below is the link to download the compatible version of LSC, while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error:
Lenovo Solution Center for Windows 8.1 (64-bit), 8 (64-bit), 7 (64-bit) - Desktops, Notebooks, WorkS...
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HP Photosmart Premium all-in-one C310a printer, Solution Center will not stay installed.

It seems lately, past month or so, that the HP Solution Center keeps failing and needs to be reinstalled. I get a message which says:" HP Solution Center cannot run because your device installation is not complete." followed by a list of steps to take to remedy the situation, which do not work. I have to uninstall and reinstall the printer and then it will work, but after I shut the computer down for the day or run a virus scan (PC Matic) the problem returns. Can anybody help me?

Hi @oboe1827,
Welcome to the HP Forums!
I see that your HP Solution Center will not stay installed for your HP Photosmart Premium c310a printer. I am happy to help you resolve this issue!
For further assistance, I will need some more information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies.
If you are using Windows, please try the HP Print and Scan Doctor, and let me know what happens!
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 7310xi officejet all-in-one-printer Solution Center Windows7 64bit unable to install

Windows 7 64bit system doesn't have any downloaded HP in Programs Files folder but it has some folders downloaded on the 64bit Program Files (x86) folder, none of these folders have the HP Solution Center download, I’ve found the complete folder download but it doesn’t download what I’m looking for.
HP 7310xi officejet all in one printer, eventhough is as your technical support considers it as an old printer, my printer is not abused and has worked fine throughout the whole time, the HP Solution Center was installed before and since I lost the software disk and your website is totally incomplete by not providing this useful resourceful printer window. It really sucks what you've done by not allowing a customer to find what's needed in your website to have your product completely work. You should place a life term limit to your manufactured products if your website does not support them, then as a customer I'd look for another printer brand.
I've followed: Provost as per windows xp explanation and HP installer is not installing the HP software in Windows Program Files neither in Windows Programs files (x86), yes there's an HP folder without the main software, I've tried also removing %temp% and also deleted files from: C:Users\(your name here)\AppData\Local\HP\Digital Imaging, I've also tryied installing the full EU and was unable due to software issue.

Hi Bob_Headrick, there isn't a CD software for sale, HP is not selling it, I've also followed every posted solution to get the HP Solution Center important software icon and have installed:
exe [1/1, 362.68M], followed aslo http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/officejet-7310-on-windows-7-and-HP-sol... http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-officejet-7310xi-won-t-install-on-w...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/officejet-7310-on-windows-7-and-HP-sol...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/Fixing-HP-Photosmart-Essential-3-5/...
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/quot-HP-Solution-Center-cannot-run-beca...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Uninstalling-Officejet-7310-all-in-one...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-officejet-7310xi-won-t-install-on-w...
Jamieson http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-officejet-7310xi-won-t-install-on-w...

Cannot install HP Photosmart Solution Center for C410a All-In-One

Computer: Dell Inspiron 15R
O/S: Windows 8.1, 64-bit
Printer: HP Photosmart Premium Fax e-All-in-One Printer C410a
This computer had a version of the HP Solution Center successfully installed in the past, but we started having problems with the computer to the point where we lost all the Microsoft Office suite. After repairing/reinstalling that, I repaired all the other Programs in the Control Panel Unstall page. However, I decided to uninstall all HP software using the Control Panel Unstall Program. I rebooted the computer and attempted to reinstall the HP Solution Center by downloading the latest software from the HP website. The software will not reinstall.
When the installer screen appears, it has 3 buttons: Install, Readme, Exit.
When I hit "Install", a popup window indicates "The system cannot find the file specified."
So, I cancel out of it and hit "Readme". A different popup window appears indicates:
Windows cannot find
'C\Users\Karen\AppData\Local\Temp\7zS3838\setup\Readme\autorun.infla...\Readme.hml'
Make sure you typed the name correctly, and then try again.
I hit "Exit" and the installation window closes.
The "\Readme\autorun.infla...\Readme.hml" message bothered me so I looked into the 7zS3838 directory. There I found the Autorun setup information file. Under the "[LaunchPad.Main.Btn2]" section is a line:
TargetPath=.\setup\Readme\%lang%\Readme.html. It seems to me the "%lang%" parameter is messed up somehow being set to some version of "autorun.infla". If "%lang%" is corupted, it seems likely that other parameters are corrupted as well indicated by the error message produced when hitting "Install".
I have tried running the Unstall_L4.bat. It seems to fail on a particular section, but then presses on to completion.
I have run a Disc Cleanup and rebooted the computer several time as well as tried this installation several times but to no avail.
I have tried installing using the PS_AIO_07_C410_140_408.exe software and it produces the same results as the Solution Center.
I even tried the original installation disc, but, when the installation screen appeared, there were no "Install" nor "Readme" buttons (only and "Exit" button).
I have looked at the log files for the Solution Center installation. It produced 12 log files: HPSLPSVC0000 - HPSLPSVC0010 and HPPIWLog. None of the HPSLPSVC log files show any errors. But, the HPPIWLog does. I'll post the as much log as I can at the end of this post. However, 2 failures stand out.
The first is:
( 3-21-2014 22:38:38:347 ):MsiEnumRelatedProducts Failed with Upgrade code : {CC6EF10F-6CFE-4660-85B4-4CED9EEC7B5B}
The second is:
( 3-21-2014 22:55:30:96 ):Error.!!Device's TYPE is NOT SUPPORTED
Well, other that the 2 errors from the log file, please let me know if you have any ideas on how the "%lang%" parameter could have been corrupted. I'm willing to dig into the registry if I have to.
Thanks in advance!
Ted
Here's the HPPIWLog:
( 3-21-2014 22:34:17:665 ):-------------- APPLICATION STARTUP --------------------
( 3-21-2014 22:34:17:665 ):Version :3.1.0.19
( 3-21-2014 22:34:17:665 )perating System : (64 Bit)
( 3-21-2014 22:34:17:665 ):-------------------------------------------------------
( 3-21-2014 22:34:18:134 )howing Invitation Screen..
( 3-21-2014 22:34:18:134 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:18:134 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:34:18:134 )et Aboutbox string..
( 3-21-2014 22:34:18:196 ):Window is set as foreground
( 3-21-2014 22:34:18:196 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:22:306 )howing Preparing Dialog..
( 3-21-2014 22:34:22:306 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:22:306 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:34:22:306 )et Aboutbox string..
( 3-21-2014 22:34:22:306 ):Window is set as foreground
( 3-21-2014 22:34:22:306 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:22:697 ):Inside CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:34:22:697 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:34:22:697 ):Call CoCreateInstance
( 3-21-2014 22:36:22:818 ):call ReregisterSLPService
( 3-21-2014 22:36:23:5 )evice Manager Enumeration - USB and Network devices
( 3-21-2014 22:36:23:21 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:23:21 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:36:23:21 )et Aboutbox string..
( 3-21-2014 22:36:23:36 ):Window is set as foreground
( 3-21-2014 22:36:23:36 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:33:538 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:33:538 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:36:33:538 )et Aboutbox string..
( 3-21-2014 22:36:33:538 ):Window is set as foreground
( 3-21-2014 22:36:33:538 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:34:70 ):Thread Started..
( 3-21-2014 22:36:34:70 ):Enumerating Modelnumber of USB Devices.
( 3-21-2014 22:36:34:85 )LP Enumeartion.
( 3-21-2014 22:36:34:85 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:34:85 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:36:34:85 )et Aboutbox string..
( 3-21-2014 22:36:34:85 ):Window is set as foreground
( 3-21-2014 22:36:34:101 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:38:34:206 ):WMI Enumeartion.
( 3-21-2014 22:38:35:472 )evice Manager Enumeration - Karnak enumeration
( 3-21-2014 22:38:35:472 ):Get Modelnumber of Network Karnak Device..
( 3-21-2014 22:38:36:831 ):Inside IsKarnakDevice Method
( 3-21-2014 22:38:36:831 )evice : HP Photosmart Prem C410 series
ModelNumber : CQ521A
( 3-21-2014 22:38:36:831 ):Webserer Request URL : http://h20614.www2.hp.com/ediags/solutions/software?client=PIW&FriendlyName=HP Photosmart Prem C410 series&OS=Windows NT 6.2
( 3-21-2014 22:38:38:347 ):Inside CheckForSoftware Method..
( 3-21-2014 22:38:38:347 ):MsiEnumRelatedProducts Failed with Upgrade code : {CC6EF10F-6CFE-4660-85B4-4CED9EEC7B5B}
( 3-21-2014 22:38:38:347 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:38:38:347 ):Call CoCreateInstance
( 3-21-2014 22:40:38:425 ):call ReregisterSLPService
( 3-21-2014 22:40:38:487 ):Network Device : HP Photosmart Prem C410 series
( 3-21-2014 22:40:38:487 ):ModelNumber : CQ521A
( 3-21-2014 22:40:38:487 ):Requet Send to Terminate Thread .!!
( 3-21-2014 22:40:38:487 ):Thread Terminated.!!
( 3-21-2014 22:40:38:487 ):Returns from CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:40:38:487 ):Number of Devices Enumerated : 0
( 3-21-2014 22:40:38:487 ):No devices Connected/Installed
( 3-21-2014 22:40:38:487 ):Current Screen Id : 3
( 3-21-2014 22:40:38:503 )howing USB Connection Dialog..
( 3-21-2014 22:40:38:503 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:38:503 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:40:38:503 )et Aboutbox string..
( 3-21-2014 22:40:38:519 ):Window is set as foreground
( 3-21-2014 22:40:38:519 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:38:519 ):Inside CUsbConnectionDlg : OnInitDialog()
( 3-21-2014 22:40:38:519 ):Returns from CUsbConnectionDlg : OnInitDialog()
( 3-21-2014 22:40:53:544 ):currentScreenId = ScreenIdNetworkDeviceSelect (2P)
( 3-21-2014 22:40:53:544 )howing Network Device Dialog..
( 3-21-2014 22:40:53:560 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:53:576 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:40:53:576 )et Aboutbox string..
( 3-21-2014 22:40:53:576 ):Window is set as foreground
( 3-21-2014 22:40:53:576 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:53:591 ):Inside NetWorkDialog : OnInitDialog()
( 3-21-2014 22:40:53:591 ):Calling NetWorkDialog : EnumerateNetworkDevices()
( 3-21-2014 22:40:53:591 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:40:53:591 ):Call CoCreateInstance
( 3-21-2014 22:42:53:653 ):call ReregisterSLPService
( 3-21-2014 22:44:53:823 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:44:53:823 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:44:53:823 )et Aboutbox string..
( 3-21-2014 22:44:53:823 ):Window is set as foreground
( 3-21-2014 22:44:53:839 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:45:3:872 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:45:3:872 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:45:3:872 )et Aboutbox string..
( 3-21-2014 22:45:3:888 ):Window is set as foreground
( 3-21-2014 22:45:3:888 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:45:4:232 ):Calling sparkBL.GetLatestSoftwareAvailabilityMatrix From Network dialog
( 3-21-2014 22:45:4:232 ):Inside GetLatestSoftwareAvailabilityMatrix Method
( 3-21-2014 22:45:4:232 ):Inside CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:45:4:232 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:45:4:232 ):Call CoCreateInstance
( 3-21-2014 22:47:4:304 ):call ReregisterSLPService
( 3-21-2014 22:47:4:350 )LP Enumeartion.
( 3-21-2014 22:49:4:457 ):WMI Enumeartion.
( 3-21-2014 22:49:4:723 )evice Manager Enumeration - Karnak enumeration
( 3-21-2014 22:49:4:723 ):Returns from CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:49:4:723 )et LatestSoftwareAvailabilityMatrix as devMap = m_DeviceSoftwareAvailabilityMatrix
( 3-21-2014 22:49:4:723 ):Returns from sparkBL.GetLatestSoftwareAvailabilityMatrix
( 3-21-2014 22:49:4:738 ):Returns from NetWorkDialog : EnumerateNetworkDevices()
( 3-21-2014 22:49:18:6 ):currentScreenId = ScreenIdNetworkDeviceSelect
( 3-21-2014 22:49:18:6 )et Re-enumeration Flag : True.
call GetDeviceSelectionScreenId
( 3-21-2014 22:49:18:6 ):Inside CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:49:18:6 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:49:18:6 ):Call CoCreateInstance
( 3-21-2014 22:51:18:57 ):call ReregisterSLPService
( 3-21-2014 22:51:18:167 )evice Manager Enumeration - USB and Network devices
( 3-21-2014 22:51:18:182 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:18:182 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:51:18:182 )et Aboutbox string..
( 3-21-2014 22:51:18:198 ):Window is set as foreground
( 3-21-2014 22:51:18:198 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:247 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:262 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:51:28:262 )et Aboutbox string..
( 3-21-2014 22:51:28:278 ):Window is set as foreground
( 3-21-2014 22:51:28:278 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:590 ):Thread Started..
( 3-21-2014 22:51:28:590 ):Enumerating Modelnumber of USB Devices.
( 3-21-2014 22:51:28:590 )LP Enumeartion.
( 3-21-2014 22:51:28:606 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:606 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:51:28:606 )et Aboutbox string..
( 3-21-2014 22:51:28:622 ):Window is set as foreground
( 3-21-2014 22:51:28:622 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:53:28:710 ):WMI Enumeartion.
( 3-21-2014 22:53:28:961 )evice Manager Enumeration - Karnak enumeration
( 3-21-2014 22:53:28:976 ):Get Modelnumber of Network Karnak Device..
( 3-21-2014 22:53:29:148 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:53:29:148 ):Call CoCreateInstance
( 3-21-2014 22:55:29:206 ):call ReregisterSLPService
( 3-21-2014 22:55:29:252 ):Network Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:29:252 ):ModelNumber : CQ521A
( 3-21-2014 22:55:29:252 ):Get Modelnumber of Network SLP Device..
( 3-21-2014 22:55:29:424 ):Network Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:29:424 ):ModelNumber : CQ521A
( 3-21-2014 22:55:29:424 )evice Details..
Name : HP Photosmart Prem C410 series
PID : 0000
ModelNumber : CQ521A
( 3-21-2014 22:55:29:424 ):Request send by PID
( 3-21-2014 22:55:29:440 ):Webserer Request URL : http://h20614.www2.hp.com/ediags/solutions/software?client=PIW&Pid=0x0000&OS=Windows NT 6.2
( 3-21-2014 22:55:30:96 ):Error.!!Device's TYPE is NOT SUPPORTED
( 3-21-2014 22:55:30:96 ):Failed to Parse Json Object.
( 3-21-2014 22:55:30:96 ):Failed to read webserver data using PID
( 3-21-2014 22:55:30:96 ):Request send by Friendlyname
( 3-21-2014 22:55:30:96 ):Webserer Request URL : http://h20614.www2.hp.com/ediags/solutions/software?client=PIW&FriendlyName=HP Photosmart Prem C410 series&OS=Windows NT 6.2
( 3-21-2014 22:55:31:362 ):Inside CheckForSoftware Method..
( 3-21-2014 22:55:31:362 ):MsiEnumRelatedProducts Failed with Upgrade code : {CC6EF10F-6CFE-4660-85B4-4CED9EEC7B5B}
( 3-21-2014 22:55:31:362 ):Insert device details to Matrix
( 3-21-2014 22:55:31:362 ):Requet Send to Terminate Thread .!!
( 3-21-2014 22:55:31:362 ):Thread Terminated.!!
( 3-21-2014 22:55:31:362 ):Returns from CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:55:31:362 ):Number of Devices Enumerated : 1
( 3-21-2014 22:55:31:362 )evices Connected/Installed
( 3-21-2014 22:55:31:362 )howing Device Dialog..
( 3-21-2014 22:55:31:425 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:31:440 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:55:31:440 )et Aboutbox string..
( 3-21-2014 22:55:31:456 ):Window is set as foreground
( 3-21-2014 22:55:31:456 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:31:456 )evice Dialog :: OnInitiDialog()
( 3-21-2014 22:55:31:471 ):Calling EnumerateDevices(false)
( 3-21-2014 22:55:31:471 ):Returns from sparkBL-> GetSoftwareAvailabilityMatrix/ GetLatestSoftwareAvailabilityMatrix
( 3-21-2014 22:55:31:471 ):m_listPrinters.DeleteAllItems()
( 3-21-2014 22:55:31:471 ):Number of Devices added to List : 1
( 3-21-2014 22:55:31:471 )evices added to List
( 3-21-2014 22:55:31:471 ):Returns from EnumerateDevices..
( 3-21-2014 22:55:31:471 )etReEnumerationFlag : True
( 3-21-2014 22:55:31:487 )evices Listed..
( 3-21-2014 22:55:31:487 ):m_listPrinters.SetSelectionMark(0).
( 3-21-2014 22:55:31:487 )et iDevNdx = m_listPrinters.GetSelectionMark().
( 3-21-2014 22:55:31:487 )elected device index, iDevNdx = 0
( 3-21-2014 22:55:31:487 )elected device index changed, Now iDevNdx = 0
( 3-21-2014 22:55:31:487 ):calling sparkBL.SetDeviceMatrix(m_DeviceSoftwareAvailabilityMap[iDevNdx])
( 3-21-2014 22:55:31:487 ):Returns from sparkBL.SetDeviceMatrix()
( 3-21-2014 22:55:31:487 ):Calling Updatestatus
( 3-21-2014 22:55:31:487 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:31:487 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:31:487 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:31:487 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:31:487 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:31:487 )evice Not Installed.!!
( 3-21-2014 22:55:31:487 ):No Bad devnode
( 3-21-2014 22:55:31:487 ):No Driver Issue
( 3-21-2014 22:55:31:503 )ort Issue Found.!!
( 3-21-2014 22:55:31:503 ):Missing Driver Issue.!!
( 3-21-2014 22:55:31:503 )rint Not Installed.!!!
( 3-21-2014 22:55:31:503 )can Not Installed.!!!
( 3-21-2014 22:55:31:503 )evice has FULL Solution
( 3-21-2014 22:55:31:503 ):Calling UpdateVidPid
( 3-21-2014 22:55:31:503 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:31:503 )elected Device's PID : 0
( 3-21-2014 22:55:31:503 ):Calling UpdateModelNumber
( 3-21-2014 22:55:31:503 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:31:503 ):Modelnumber : CQ521A
( 3-21-2014 22:55:31:518 )isable the sorting of devices in ListCrtl
( 3-21-2014 22:55:31:518 ):Returns from Device Dialog :: OnInitiDialog()
( 3-21-2014 22:55:38:285 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:38:285 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:38:285 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:38:285 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:38:285 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:38:285 )evice Not Installed.!!
( 3-21-2014 22:55:38:285 ):No Bad devnode
( 3-21-2014 22:55:38:285 ):No Driver Issue
( 3-21-2014 22:55:38:285 )ort Issue Found.!!
( 3-21-2014 22:55:38:285 ):Missing Driver Issue.!!
( 3-21-2014 22:55:38:285 )rint Not Installed.!!!
( 3-21-2014 22:55:38:285 )can Not Installed.!!!
( 3-21-2014 22:55:38:285 )evice has FULL Solution
( 3-21-2014 22:55:38:301 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:38:301 )elected Device's PID : 0
( 3-21-2014 22:55:38:301 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:38:301 ):Modelnumber : CQ521A
( 3-21-2014 22:55:38:426 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:38:426 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:38:426 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:38:426 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:38:426 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:38:426 )evice Not Installed.!!
( 3-21-2014 22:55:38:426 ):No Bad devnode
( 3-21-2014 22:55:38:426 ):No Driver Issue
( 3-21-2014 22:55:38:426 )ort Issue Found.!!
( 3-21-2014 22:55:38:426 ):Missing Driver Issue.!!
( 3-21-2014 22:55:38:426 )rint Not Installed.!!!
( 3-21-2014 22:55:38:426 )can Not Installed.!!!
( 3-21-2014 22:55:38:426 )evice has FULL Solution
( 3-21-2014 22:55:38:426 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:38:426 )elected Device's PID : 0
( 3-21-2014 22:55:38:442 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:38:442 ):Modelnumber : CQ521A
( 3-21-2014 22:55:47:115 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:47:115 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:47:115 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:47:115 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:47:115 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:47:115 )evice Not Installed.!!
( 3-21-2014 22:55:47:115 ):No Bad devnode
( 3-21-2014 22:55:47:115 ):No Driver Issue
( 3-21-2014 22:55:47:115 )ort Issue Found.!!
( 3-21-2014 22:55:47:115 ):Missing Driver Issue.!!
( 3-21-2014 22:55:47:115 )rint Not Installed.!!!
( 3-21-2014 22:55:47:115 )can Not Installed.!!!
( 3-21-2014 22:55:47:115 )evice has FULL Solution
( 3-21-2014 22:55:47:115 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:47:115 )elected Device's PID : 0
( 3-21-2014 22:55:47:130 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:47:130 ):Modelnumber : CQ521A
( 3-21-2014 22:55:47:146 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:47:146 ):FTP URL : ftp://ftp.hp.com/pub/softlib/software12/COL34152/mp-109793-1/PS_AIO_07_C410_140_408.exe
( 3-21-2014 22:55:47:146 )howing Downloading Dialog..
( 3-21-2014 22:55:47:162 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:47:162 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:55:47:162 )et Aboutbox string..
( 3-21-2014 22:55:47:193 ):Window is set as foreground
( 3-21-2014 22:55:47:193 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:47:209 ):-------HPPIW SOLUTION DOWNLOAD INFO------
( 3-21-2014 22:55:47:209 )olution Download Link :ftp://ftp.hp.com/pub/softlib/software12/COL34152/mp-109793-1/PS_AIO_07_C410_140_408.exe
( 3-21-2014 23:0:16:422 ):Running Processes :
( 3-21-2014 23:0:16:422 ):[System Process]
( 3-21-2014 23:0:16:422 )ystem
( 3-21-2014 23:0:16:422 ):smss.exe
( 3-21-2014 23:0:16:422 ):csrss.exe
( 3-21-2014 23:0:16:422 ):wininit.exe
( 3-21-2014 23:0:16:422 ):csrss.exe
( 3-21-2014 23:0:16:422 ):winlogon.exe
( 3-21-2014 23:0:16:422 ):services.exe
( 3-21-2014 23:0:16:422 ):lsass.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):dwm.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):RtkAudioService64.exe
( 3-21-2014 23:0:16:437 ):RAVBg64.exe
( 3-21-2014 23:0:16:437 ):RAVBg64.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):spoolsv.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):armsvc.exe
( 3-21-2014 23:0:16:437 ):AERTSr64.exe
( 3-21-2014 23:0:16:437 ):AppleMobileDeviceService.exe
( 3-21-2014 23:0:16:437 ):AdminService.exe
( 3-21-2014 23:0:16:437 ):mDNSResponder.exe
( 3-21-2014 23:0:16:437 )fficeclicktorun.exe
( 3-21-2014 23:0:16:437 ):dasHost.exe
( 3-21-2014 23:0:16:437 ):HeciServer.exe
( 3-21-2014 23:0:16:437 ):McSvHost.exe
( 3-21-2014 23:0:16:437 ):mfevtps.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):RichVideo.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 )ocketCloudService.exe
( 3-21-2014 23:0:16:437 ):WyseRemoteAccess.exe
( 3-21-2014 23:0:16:453 ):McAPExe.exe
( 3-21-2014 23:0:16:453 ):mcshield.exe
( 3-21-2014 23:0:16:453 ):mfefire.exe
( 3-21-2014 23:0:16:453 ):svchost.exe
( 3-21-2014 23:0:16:453 ):svchost.exe
( 3-21-2014 23:0:16:453 ):svchost.exe
( 3-21-2014 23:0:16:453 ):taskhostex.exe
( 3-21-2014 23:0:16:453 )ynTPEnh.exe
( 3-21-2014 23:0:16:453 ):explorer.exe
( 3-21-2014 23:0:16:453 ):GoogleCrashHandler.exe
( 3-21-2014 23:0:16:453 ):TabTip.exe
( 3-21-2014 23:0:16:453 ):TabTip32.exe
( 3-21-2014 23:0:16:453 ):GoogleCrashHandler64.exe
( 3-21-2014 23:0:16:453 )earchIndexer.exe
( 3-21-2014 23:0:16:453 )kyDrive.exe
( 3-21-2014 23:0:16:453 ):WmiPrvSE.exe
( 3-21-2014 23:0:16:453 ):dllhost.exe
( 3-21-2014 23:0:16:453 )ettingSyncHost.exe
( 3-21-2014 23:0:16:468 ):BtvStack.exe
( 3-21-2014 23:0:16:468 ):ActivateDesktop.exe
( 3-21-2014 23:0:16:468 ):RtkNGUI64.exe
( 3-21-2014 23:0:16:468 ):RAVBg64.exe
( 3-21-2014 23:0:16:468 ):RAVBg64.exe
( 3-21-2014 23:0:16:468 )ynTPHelper.exe
( 3-21-2014 23:0:16:468 ):igfxtray.exe
( 3-21-2014 23:0:16:468 ):igfxsrvc.exe
( 3-21-2014 23:0:16:468 ):hkcmd.exe
( 3-21-2014 23:0:16:468 ):igfxpers.exe
( 3-21-2014 23:0:16:468 ):quickset.exe
( 3-21-2014 23:0:16:468 )ellSystemDetect.exe
( 3-21-2014 23:0:16:468 )DVD10Serv.exe
( 3-21-2014 23:0:16:468 ):McUICnt.exe
( 3-21-2014 23:0:16:468 ):hppiw (9).exe
( 3-21-2014 23:0:16:468 ):hppiw.exe
( 3-21-2014 23:0:16:468 ):AbsoluteReminder.exe
( 3-21-2014 23:0:16:468 ):CLMLSvc_P2G8.exe
( 3-21-2014 23:0:16:468 ):IAStorIcon.exe
( 3-21-2014 23:0:16:468 ):IAStorDataMgrSvc.exe
( 3-21-2014 23:0:16:468 ):Jhi_service.exe
( 3-21-2014 23:0:16:484 ):WmiPrvSE.exe
(FYI - Could not post whole log due to the 50,000 character limit. No errors reported after this point)

Firstly, thanks for your suggestion. I appreciate it.
Secondly, sorry it took so long to get back to you. The computer is my wife's and she been quite busy with it so I haven't had the chance to test out your suggestion.
Unfortunately, your suggestion didn't work. I tried it multiple times with no luck.
Here's some additional data.
(1) As for the "ReadMe" issue (mentioned in the initial message), the "autorun.infla..." issue looks like the first "%" in the "%lang%" string is in fact the name of the file "autorun.inf". So when "%lang%" is being printed, "autorun.inf" is being substituted for the first "%", hence "autorun.infla...".
Not sure if that helps.
(2) I tried running HP Print and Scan Doctor and I saw something unusual. The initial page shows the following:
Product Connect Software Status
Prem C410,192.168.1.7 Network(192.168.1.5) Installed
Prem C410,192.168.1.7 Network(192.168.1.7) Installed
There is ony 1 printer hooked to the network. I searched through the registry and I did find instances of "192.168.1.5" and "192.168.1.7".
(3) I also tried using the various uninstallers under util\ccc.
L1: Completed with no issues.
L2: On step 10/12, a popup window indicates "Hp Installer Uninstaller has stopped working". I click "Close Program" and that's the end of the processing.
L3: Same as L2. But, after closing the program, a pop-up window asks "Are you sure you want to remove from your computer?" (FYI - No, I did not miss anything here. That is exactly as it is printed. There seems to be 2 spaces between "remove" and "your" as if a filename or program name should go here.) I click "Yes", eventually the screen indicates 100% complete and I click "OK". This sequence happens 3 more times (pop-up followed by a 100% complete screen). After the 4th time, a screen indicates the process is complete, I hit "Finish" and the computer automatically reboots.
L4: Exactly the same as L3.
At times when step 10/12 failed, the "Current Progress" will be stopped on "Software\Wow6432\Hewlett-Packard\" followed by other registry entries. I've searched through the registry and I can find only one entry that matches this: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432\Hewlett-Packard. But, none of the entries that follow that on the "Current Progress" bar match any entries. (Ex: Software\Wow6432\Hewlett-Packard\DigitalImaging\CUE Settings. This key does not exist. There is a HKEY_CURRENT_USER\Software\Hewlett-Packard\DigitalImaging\CUE Settings, but not one tagged with the "Wow6432" entry.
Anyway, it looks like something has gone wrong with this computer's registry. I reluctant to start hacking away at the registry.
I could use some more suggestions.
Thanks!
Ted

How do I install a printer?

yes I know it sounds like an idiotic question; please bear with me. I have a relatively modern (<1 year old) business colour laserjet (Kyocera Mita Ecosys FS-C5025N) which is connected to my home network via wired ethernet. My MBP is also connected to my network via wired ethernet. My problem is that having once installed my printer (and had it working) I had to turn the printer off to clear a job and now my MBP won't communicate with it.
When I turned it off and on again, the DHCP on my network gave my printer a new address (192.168.1.5 instead of 192.168.1.19). So I'm guessing that OS X has 'lost' it in some way. My solution was to go into System Preferences, Print and Fax, and delete the printer, with the expectation of being able to reinstall it. however, the problem is that when I click '+' in Print and Fax to add a printer, my K-M printer is nowhere to be found (when I installed it the first time, OS X found the printer automatically and I just selected it).
So how can I find/install this printer again? When I click the + in Print & Fax now I am presented with 4 options, default, Fax, IP and Windows. If I select IP and put in 192.168.1.5 under 'Address' (using all other default options, protocol = Line printer Daemon LPD, etc) it finds the printer. However, once installed, when I check the printer out, I see a yellow 'attention triangle' with the message 'this printer was not installed properly'.
I thought that I would try downloading the driver from the Kyocera Mita site. I've done this and installed the printer this way ... it all ran correctly but when I go back into Print & Fax - no printer is to be found? Is there a secret directory somewhere into which I must go and delete something rogue that's gumming up my system?
Any ideas, you gurus out there? Solved Stars await! Please.

Thanks Pahu, much appreciate the input. I'm working through this now and have the following: Apologies for War & Peace - I just wanted to be precise...
Looking up Bonjour I see that it's a 'IP protocol to allow devices to automatically discover each other without the need to enter IP addresses or configure DNS servers'. When I set up the printer the first time, I do recall OS X finding it and the word Bonjour was there (I just didn't know what it meant). So I'm guessing that the printer must have had the right responder settings for it to work. It's just this time round it's not finding it. Nothing has changed on the printer end (apart from switch-off, switch-on). Hence, as I've come from 20+ years in Windows, I know that sometimes you have to delete registry entries to clear a problem before reinstalling a device, I wondered if there was a similar Apple procedure?
Looking at the manual, I see that the printer is PCL6 and Postscript3 compatible with auto emulation sensing. So I've set up the first test to be as an IP printer, LPD, inputting the address 192.168.1.5 in the Address field, and using the generic PCL driver as you suggest. When I click Add, I don't see any options but I guess that's because of the generic driver. The printer now appears in my Print & Fax box, but when I double click it I see a new box which says that the printer software was installed incorrectly, please re-install. Despite this, I can print to it (I tested from within Word). But I have no advanced options.
I would like to set up a second test using the Kyocera printer driver (using the generic PCL driver doesn't give me any printer options). I have downloaded this one here http://usa.kyoceramita.com/americas/jsp/Kyocera/download_center.jsp?pid=16744&pc at=10563&rcid=10009&rscid=10007#bottom, selecting the 'Kyocera Mita OSX 10.4 & 10.5 installer v 1.0' and the 'Kyocera Mita OSX 10.6 Permissions Fix' as you suggest in your reply. The former download a .mpkg.zip file which I extracted (53 items) using zipeg. When I ran the file it said that it was an installer for the printer, and completed successfully. When I checked in Print & Fax, clicked the +, there was no KM-printer installed (under default). This is consistent with the blurb about the permissions fix, which should fix this I guess?
So I then downloaded and unzipped the Permissions Fix, which put a folder (containing a file called Kyocera OS X 10.6 solution.command) on my desktop. When I try to run this I receive the message 'this file could not be executed because you do not have the appropriate access privileges'. I'm the only user on my MBP with full privilege? When I checked through Finder, Get Info I have Read & Write access for this file.
There is a PDF which I've found to install this file. It says
Follow the Installation Instructions below to install the MAC 10.6 PPD Patch. The Patch will allow a new Kyocera Printer to be added.
Subject: 10.6 PPD File Patch Installation Instructions
On KMAconnect Download and run the OSX 10.4 & 10.5 Installer. (DONE)
Download the OSX10.6 permissionfix.zip file to your Mac running OSX 10.6.(DONE)
Double click the zip file to extract the contents to the desktop folder. (DONE)
Double click the file called Kyocera OS X 10.6 solution. A Terminal window will open. (NO IT DOESN'T, I GET THE ERROR MESSAGE ABOVE)
Key in the password for the (Root) Administrator when prompted for the changes to take affect. (CAN'T DO THIS DUE TO ERROR MESSAGE ABOVE...)
Note: When keying in the Administrator Password, the Terminal window will keep the Password Masked so it will not display any change in the window when the characters are being input. If there is no password assigned, one must be created before running the OSX10.6 solution file.
You can now add a Kyocera Printer in the normal manner.
Any thoughts on how I can run this file?
I don't know if it matters but the PDF says the file in the Permissions Fix is called Kyocera OS X 10.6 solution but it's actually called Kyocera OS X 10.6 solution.command ...?

HP Solution Center Software ungrad to Windows 7, will not set up the printer in software

After upgrading from Windows Vista to Windows 7. This was a clean reinstall of Windows Vista and then the upgrade was in stalled. I downloaded the new version of the HP Solution Center full and set it up in my computer.
The printer is HP Officejet Pro L7580 and I have set up the print in my control panel as wireless connection and my wireless software for has been upgraded for Windows 7 and the printer is properly connected and printing.
However when I try to set up my printer in the HP Solution Software it will not set up as a wireless connection for my computer.
Does anyone know how to solve this problem?

I get printer c8100 series will not work scanner at hp solution center. Please help me out?

How do I get the HP solution center back on windows 7

I have an officjet pro 8500 all in one printer. It was on windows vista but after a computer crash I have installed it on windows 7 but I cannot do anything with it because I am unable to get the hp solution center to work. I have downloaded the new software and drivers and yet it still tells me that the hp soluntion center cannot run because your device installation is not complete. I reran the disc with the network option but it still wont work. Does anyone know of anything I can do to get this to work. I cannot scan or anything with it just copy.
Thank you

There are two approaches to try.
The First Method is easier - the Second Method is more likely to work.
It would help if I knew your exact printer model; it may not matter. It sounds like you have already downloaded your printer's installation package from your printer's website -- you will need the installation package for both methods.
Method One:
Remove the software bits with the following:
Fixit -- Fix problems with programs that can't be installed or uninstalled
Reboot the computer and log in
Install the software package -- probably from your Downloads folder
HP Officejet Pro 8500 - A909g - Full Feature Software Win7
====================================================================================
Method Two:
By pcwizard
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete.
NOTE: If you get a message that the file is in use you will need to skip this/these file(s).
Continue with Step 2 below
Step two: Downloaded and extract to your system:
1. Download the Full Feature Software and drivers from your printer's website
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer
============================================================================
I hope this helps.
Kind Regards,
Dragon-Fur

How do i install d110 printer solution center software so it will actually run like is supposed to?

Similar Messages

Maybe you are looking for