How do I install dual-boot Solaris 8 and Solaris 9 on one hard disk ?

I tried to install Solaris 8 and Solaris 9 on same disk using CDs, but
the second installation overwrote the first Solaris which was installed
previoudly on the half-disk size partition of same disk.
How do I install two Solarises on one hard disk ?
Thanks
Yakov

There are no tricks to get Solaris to dual boot on the same drive. Just allocate and pick the free slices not used by the first Solaris install when you put in the second install. Technically speaking there is nothing preventing you from running seven separately bootable Solaris instances on the same drive (one of 8 available slices is overlap -- slice 2) provided you use a swap file on a root partition instead of reserving a whole slice for swap.

Similar Messages

Dual Booting Windows and Solaris

Hi
how do i dual boot windows and solaris
Do i install windows first and then solaris or do it the other way around..?
how do i make sure that Windows and Solaris appear in my boot options..?
Is their a guide on doing this...?
Thanks
Liam

Hey I did a quick google search for you. So I havent tried this method myself but it sounds reasonable.
The text below is from the following link:
http://www.hccfl.edu/pollock/AUnix1/DualBoot.htm
"Solaris boot loader
Partition the drive to leave at least 2GB of space available for Solaris;
more drive space is desirable.
As with Linux, install Windows first then Solaris.
Do not use the Installation CD but boot and install
from Software CD 1.
If you accept the default partitioning scheme which
the installer provides you will soon run out of space in
your / and /usr partitions since only enough space is
allocated to install the system.
All extra space is allocated to /export/home.
A typical installation on a 4.5GB partition might look
something like this:
Filesystem Size Used Avail Use% Mounted on
/dev/dsk/c0d0s0 900M 536M 310M 64% /
/dev/dsk/c0d0s1 334M 109M 192M 36% /var
swap 671M 8.0k 671M 1% /var/run
swap 671M 8.0k 671M 1% /tmp
/dev/dsk/c0d0s5 845M 222M 565M 29% /opt
# (FAT32 partition):
/dev/dsk/c0d0p0:1 5.0G 3.3G 1.6G 66% /c
/dev/dsk/c0d0s7 1.1G 92M 954M 9% /export/home
/dev/dsk/c0d0s4 752M 225M 474M 33% /usr/local
The Solaris boot selector enables you to choose either
Solaris or Windows with Solaris as the default.
(I prefer grub or lilo!)
To mount FAT under Solaris:
# mount -F pcfs /dev/dsk/c0d0p0:c /dos (or �:1�?)
And the vfstab file:
/dev/dsk/c0d0p0:c - /dos pcfs - yes -
To create a GRUB boot floppy, follow these steps:
$ mkfs -t ext2 /dev/fd0
$ mount /dev/fd0 /mnt/fd0
$ mkdir /mnt/fd0/boot /mnt/fd0/boot/grub
$ cp /boot/grub/stage[12] /boot/grub/grub.conf \
> /mnt/fd0/boot/grub
$ /sbin/grub --batch <
Hope this helps!
/Oscar

[SOS]Which mac mini device can install dual boot(Lion and Mt Lion)?

Salutations!
Due to my assignment, I need to get mac mini device which support dual boot.
Which mac mini device model/firmware can we install dual boot(Lion and Mt Lion) on it?
I got late 2012 one, but it looks like it does not support.
Please help me.
Thank you so much,
TriQuang

Hi Niel,
Thank you for your fast reply. So if I buy mac mini MC815 model, which comes with preinstalled Lion I can run dual boot(Lion and Mt Lion)?
I have one more question: Can I install Mac OS 10.6 on that mini device? If it's not supported which mac mini model can I get to support Snow Leopard and Lion and Mt Lion?
Thanks and best regards,
TriQuang

How can i install mac os when i already erased my hard disk and no way to go back to my mac i'm in did erased by conrol key r then i can't do anything i have four choices restore back up,reinstall ,get help online here where i'm using the broswer and disk

when i tried to reinstall from that option and i entered my apple id it says that i need apple id that was used to purchase lion,
i have no cd for that when i bought it.i am using macbook pro.
i can's use my mac anymore i am using it by clicking on control and key R when i on then i use get help online to get help like now.
i have no back up too.
what can i do in this situaion .

Try CMD+R. That will restore the latest version you were running.

Installing Windows (Boot) with Ipod as an usb hard disk

hi
i want to use my ipod to boot and install windows
to select him in the bios boot sequence as usb hdd
plz help

First, BIOS must support a boot from USB device. Second, iPod must be in Disk Mode. Third, iPod must be formatted as bootable medium such as floppy diskette, CD/DVD-ROM, or flash drive. Let us know when and how you accomplish the third part.

Dual boot Solaris 9 and Solaris 10 on a SCSI hard disk

Hi,
I would like to dual boot Solaris 9 and Solaris 10 on a SCSI hard disk. Currenlty that 16gb hard disk has Solaris 9 installed on it.
What are the steps needed to install Solaris 10 and dual boot them?
Thanks a million.
ldd

Unfortunately we can't help you as this forum is only for questions or problems relating to Sun Update Connection, Patch Manager 2.0, & PatchPro 2.2.
We recommend you post your question on one of the Solaris OS forums:
http://forum.sun.com/jive/category.jspa?categoryID=139

Dual boot Windows and Linux?

I recently bought a T61, and will be taking a programming course. One prof I spoke with said they ask us to use Unix tools, so one option is to dual boot linux and Windows. I haven't decided yet whether I will keep Windows Ultimate, or go to XP for this. But I was wondering how easy/hard is it to make this work, and what kind of steps need to be taken? If you could point me towards any good tutorials/guides that would be appreciated too.
Also, I have never really used linux, so which version is best? I will be needing it for programming, but also still want to do the basics like web surfing, music, dvd's, burning discs, etc. I have an old copy of Ubuntu that I never used, but its probably about 4 years old. Is this still acceptable or will I need something newer?
Message Edited by amace on 05-29-2008 01:28 PM
T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

Hi,
If it's just a couple of programming courses that you are going to take I suggest you'd try out VMware player:
http://www.vmware.com/products/player/
You can get this software for free and since your system packs a lot of punch it will be able to run it smoothly without any hassle. I'm an engineering grad student and I have to do alot of programming. I've used VMware player before to do some software developement in Ubuntu when I didn't have enough HD to install dual boot but still couldn't do all my other stuff without XP.
VMware Ubuntu will need a bit of fiddling to get it work just right (USB devices, etc) but it shouldn't be harder than installing a dual boot (actually it is alot easier for my opinion). The only down side is that file sharing between VMware and Windows can be somewhat difficult. I used an external USB drive to share my files but you could always set up Samba to handle file sharing.
I hope this helps out with your decision.

[Success] Dual Booting Arch and Windows 7 [Advice / Confirmation]

So I have been trying to get Starcraft II to work with wine and no luck.
I have decided to install windows back on my computer, besides it might come in handy since I'm heading back to school soon.
Anyways I have tried dual booting arch and windows in the past, and my results have never been stable.
Today I will try using the program gparted.
Let me give you my thoughts on how I plan to go through this and please give me some advice so I don't loose everything I have worked for on my linux box
1.Currently I have two hard drives, one for all my main programs and one for my media files (mounting usb, dvd, etc, and it actually has no files in it xD).
I plan to use gparted to re-size my second harddrive (media drive), create an extended partition, and a logical ntfs partition within it.
2.I pop in my windows cd that I recieved with my laptop and install it on the space I have partitioned for windows.
3. If my grub gets wiped out my windows (which I hope it doesn't not sure how the MBR stuff works) I insert a Ubuntu live cd and do
sudo grub
> root (hd0,0)
> setup (hd0)
> exit
4.Configure grub to boot windows 7.
5.Be happy with no headache.
SO....
If someone with past experience with dual booting windows and arch could please give me some advice, as I do not want to lose all my data, start over, and have another headache.
I know I must learn to backup arch, which I will before september.
But if anyone has any protips, or sees a flaw in my plan please point it out!!!
Thank you very much for taking the time to read this and even more if advice has been given to boost my confidence!
For now I will wait
Thank you fellow archies.
Last edited by Jabrick (2011-07-03 01:29:36)

satanselbow wrote:
1) Windows must be installed to a primary partition - attempting to install it to an logical partition will result in an epic fail
2) Physically disconnect the harddrive you do not want windows on as windows typically installs the bootloader on the 1st hardisk (ie /sda) regardless of installation drive (ie /sdb)
3 / 4) Complete the windows installation then reattached your Arch drive and edit /boot/grub/menu.lst (as root) pointing the W7 entry to (hd1,0) - no need to reinstall grub
5) Hey it's windows - anything could happen
If you create an NTFS partition right at the beginning of the the drive before you start the W7 install you can prevent it greedily using up 2 of you 4 primary partitions - I would also completely update you new W7 installation past SP1 before reattaching the other drive to further prevent W7 going mental
satanselbow thank you so much!
Everything works great I had no stumbles, and I hope no problems in the future!!
I will post exactly what I did in case someone has the same issue.
1. Partition you're secondary harddrive as primary ntfs with gparted
2. Reboot, and if you get a file system check error, check you're udev rules. (For my case in particular I had to change the udev rules I got for auto mounting usb, ext harddrive, etc.
3.Power off your computer and physically remove the harddrive that contains all your linux goodies
4. Plug in your windows cd and install in the partition you created
5. Update your windows OS
6. Plug in Ubuntu live CD and reboot
7. Use commands to get grub to overwrite the windows boot loader (In my case I put grub everyone hd0,0 hd0,1 just to be sure, but you might want to do things cleaner)
8. Reboot and see if grub loads up
9. Use Ubuntu live CD again and launch Gparted, select the boot to your extra linux space (if you had one, not sure if this is needed)
10. Plug in your linux harddrive and reconfigure /boot/grub/menu.lst and your good to go
Once again shout outs to satanselbow!!! For without him I might've failed brutally!
Cheers!

Dual booting Arch and Ubuntu

Hi, I would like to dual boot Arch and Ubuntu using GRUB2.
I already have Arch, set up as it's described in the Beginner's Guide, with GRUB2 installed. How would I go about dual booting Ubuntu, preferably without overwriting the existing bootloader?
I haven't tried anything yet, but the problem that I can see is resizing my /home; is this possible on the Ubuntu liveDVD? If not, would I be able to resize /home with my gParted liveCD?
Unfortunately, I have no backup media to use, so I wouldn't be able to transfer anything away as a backup.
Here is my partition table:
%lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931.5G 0 disk
├─sda1 8:1 0 30G 0 part /
├─sda2 8:2 0 12G 0 part [SWAP]
├─sda3 8:3 0 5M 0 part
└─sda4 8:4 0 889.5G 0 part /home
sda1 is my root partition, sda2 is swap, sda3 is GRUB's boot partition, which I was told that I needed in the guide, and sda4 (/home) occupies the "rest of the disk".
I am using a GPT-partitioned drive, as I read this has many advantages and I do not plan to triple-boot Windows.
So, can someone tell me what I do if I want to dual boot Ubuntu? I'm very sorry if this should have been posted on the Ubuntu forums, but I'm just more familiar with Arch, and I already have it installed. Please ask if you need any other files like my fstab. I have my Ubuntu liveDVD, GParted live CD (and Arch CD) at hand.
Thanks in advance, rberyl.
(Also, does anyone else think it's a bit of a backwards thing to put the output of "date -u +%W$(uname)|sha256sum|sed 's/\W//g'" as a sign-up question? )
Last edited by rberyl (2012-12-29 11:45:23)

Hi rberyl,
You can change your partitions using an inbuilt tool like cfdisk, or if you'd prefer a GUI gparted can be installed from the Arch repos. This will allow you to shrink sda4, and set up the new partitions for your Ubuntu OS. Although this shouldn't cause any data loss, its best practice to back up just in case.
When installing Ubuntu, be sure to opt-out of bootloader creation. I think you have to use the alternate installation media to get this option. You can add your Ubuntu partition to the existing bootloader by running osprober (available from the repos) and then running grub-mkconfig -o /boot/grub/grub.cfg . Alternatively, you can manually edit your GRUB config. See https://wiki.archlinux.org/index.php/GR … NU.2FLinux for instructions.
Good luck!
Last edited by smazza (2012-12-29 16:04:08)

Dual Boot Windows7 and OSX on an HP 2140

I thought this was a great blog from networkjew.com about creating a Dual Boot Windows7 and OSX on an HP 2140.
Now that you’ve got your sleek little HP 2140 netbook, its time to blow away Windows XP and put something a bit snazzier on there. I’ve toyed with OSX86 previously, and knew that most of the netbooks out there support it in one way or another, and many of them quite well. I had also read that Windows 7 played very nicely on these tiny computers, and it’s free for a few months, so why not?
Here’s how I made it work – there may be better ways, but this worked for me, mostly:
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!

Windows 7 runs great on the 2140. I actually haven't had a chance to test all hardware functionality, but its nice and snappy; and as far as I can tell, all the hardware was recognized right out of the box. I loaded several of the Vista drivers/software from the HP support website and a few of them failed, but many installed just fine. I forgot to note which ones, unfortunately.
Great netbook.

Dual Boot Vista and Arch

Hey, I am attempting to set up my laptop to dual boot Windows Vista and Arch Linux.
The problem I'm having is after installing Arch my laptop still boots windows w/o going to the grub
I started with having Windows Vista installed on the laptop, and then shrank down the partition with vista by 30 gigs for Arch.
I was following the Arch setup guide in the wiki along with the Dual Boot Windows and Arch guide in the wiki [wiki]Windows_and_Arch_Dual_Boot[/wiki].
My partitioning Scheme is:
/dev/sda1 1.46 gb (some sort of toshiba recovery partition I believe)
/dev/sda2 117.8 gb (Vista Partition)
/dev/sda3 1 gb (Swap partition)
/dev/sda4 29 gb /root partition
According to the Dual Boot wiki article, I should install the grub to /boot, which in my case is in /root which I did.
The thing that confuses me about this is if I install the grub to /boot how do I get the grub to boot before the windows MBR?
Thanks in advanced

Mclarenf1905 wrote:
Hey, I am attempting to set up my laptop to dual boot Windows Vista and Arch Linux.
The problem I'm having is after installing Arch my laptop still boots windows w/o going to the grub
I started with having Windows Vista installed on the laptop, and then shrank down the partition with vista by 30 gigs for Arch.
I was following the Arch setup guide in the wiki along with the Dual Boot Windows and Arch guide in the wiki [wiki]Windows_and_Arch_Dual_Boot[/wiki].
My partitioning Scheme is:
/dev/sda1 1.46 gb (some sort of toshiba recovery partition I believe)
/dev/sda2 117.8 gb (Vista Partition)
/dev/sda3 1 gb (Swap partition)
/dev/sda4 29 gb /root partition
According to the Dual Boot wiki article, I should install the grub to /boot, which in my case is in /root which I did.
The thing that confuses me about this is if I install the grub to /boot how do I get the grub to boot before the windows MBR?
Thanks in advanced
It still works fine. It doesn't matter if its not in root directory. Others linux OSes have their bootloaders in the same directory and it manages to boot just fine.

Dual Boot XP and Vista (L305-S5944)

I have got XP Pro on it and Vista which came installed... and used the VistaBootPro on the computer to choose between the two... but when I loaded that up it will now nolonger load XP. It said that i need a NTLDR file well i fixed that and now right when it starts to load XP it flashes the BLUE SCREEN not even a full second then reboots... I am lost now....
PLEASE HELP>>>

Satellite L305-S5944
Maybe you should begin again.
How to dual boot Vista and XP (with Vista installed first) -- the step-by-step guide with screenshot...
-Jerry

Dual-boot OS9 and Leopard on a MDD howto??

Hi
If I start with a Leopard DVD, an OS 9 CD, a new unformatted HDD, and a non-FW800 MDD, how to I install it all to dual boot off one partition?
I have not worked with this stuff in a few years so I am a bit vague and appreciate the help from the community. It is a dual-CPU 1.0 GHz, not FW800, and should support this dual-boot setup.
Thanks

It will be hard to find the cd for mac os 9 for this machine. The mactracker database indicated the machine requires 9.2.2. I'm not sure if 9.2.2 was ever sold as a stand-alone cd. There is a possiblity that even if you found mac os 9.2.2, the mdd could have specific drives that might not be on the a full install copy of mdd. There is a fuzzyness over the meaning of 9.2.2, It was the closes OS at the time of ship. For the full install cd, you best get a point release greater than the release at the time of ship.
Should you be able to find and correctly identify the grey machine restore cds they would work.
Another possiblity which I haven't tried but you could always try is to get another g4 and instll 9.x on it then upgrade to 9.2.2. Take out the hd & place it in your mdd. You never know if this would work unless you try.
Some people seem to know the numbers on the cd for each machine.
The cd number might be 6c155 see blow in image
If you buying this, get a full install 9.2.2 or a machine specific cd & try before you buy. Some machine might have 9.2.2 on them. If they have a working 9.2.2 on the machine ::: Do not erase it. Get a backup external drive and back everything up. If it works & you need it, do not erase. Buy another dirve.
get the mactracker app so you can look for other machines.
the apple pi apple hobbie clubs might have cds.
Robert

How do i install microsoft office home and student 2010?

i need help installing 2010 microsoftoffice on my macbook air

rosie33 wrote:
how do i install microsoft office home and student 2010?
i need help installing 2010 microsoftoffice on my macbook air
Just to be clear, Office 2010 is for Windows. Office 2011 is for Mac. If you actually are trying to install Office 2010, you'll need to have installed Windows on your Mac either through Boot Camp or in a virtual machine.

HT204266 How do I install the app store and get my camera back in my ipod?

How do I install the app store and get my camera back in my ipod?

Try a restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

How do I install dual-boot Solaris 8 and Solaris 9 on one hard disk ?

Similar Messages

Maybe you are looking for