How do i install elements on a usb drive?

how do I instrall Ps elements on a usb drive?

You can't. adobe software can't be installed on external drives and it's not "portable" in the first place due to the activation system, so short of running out of disk space there is no rational reason to even try it...
Mylenium

Similar Messages

  • How do i install Apple Mobile Device USB driver

    I have just bought an ipad 2 and cannot connect to itunes - various messages tell me to ensure Apple mobile driver is installed - how do i do that?

    Hope you got this fixed.
    I just fixed my ipod nano problem on my own and figured I'd share as I have just spent the last 4 hours trying to trouble shoot all of Apple's problems...following everyone's tips...nothing worked until I figured it out on my own.
    I'm running windows 7 and have an Ipod Nano (6th Gen).  Hard drive crashed on computer.  Replaced HD.  Everything works fine now.  Downloaded iTunes along with all other programs.  Nano wouldn't show up or sync on iTunes.  Said Device Driver Software was not successfully installed (some USB problems).  Tried everything.  Finally, I figured it out.
    Disconnect Nano.  Uninstall iTunes AS WELL AS Apple Application Support, Apple Mobile Device Support, and Apple Software Update.  Apple only tells you to uninstall iTunes and reinstall..restart computer bla bla bla.  I said screw it and uninstalled all Apple programs (well, the listed ones above).  I hooked up my nano to my computer to make sure the device manager recognized it without anything else plugged in...and it did.  I unplugged it.  Reinstall iTunes and all three other Apple programs listed above will also reinstall.  I opened iTunes and plugged in my nano.  It started with the "installing device driver software" and I was sure it wasn't going to work.  Well, it did work.  My nano showed up in the upper right bar of iTunes and synced.  Unreal...  I unplugged my nano and plugged in the wife's.  Once again, "installing device driver software."  Voila!  Her's showed up and synced too.  I plugged mine back it to make sure it worked and it did.  I'm done.  It's working.  Hope these steps work for you as well.

  • Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...

    Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How do I install Elements 9 on a PC that has no CD/DVD drive?

    How do I install Elements 9 on a PC that has no CD/DVD drive?
    Thanks in advance!
    TIm

    You can download the software and continue with the installation.
    Below is the link :-
    http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
    Make sure you read the instruction carefully to avoid any error.

  • How do you install elements 11 after downloading it?

    how do you install elements 11 after downloading it?  I am running windows 8, it ask me what app I want to use and sends me to the Windows ap store

    you need to download both the exe (smaller file) and the 7z (larger file).  put both in the same directory and then click the exe.

  • How to re-install Elements 9 on Vista? [was: A friend of mine died half a year ago. he was an excellent Phothografer in Belgium/]

    The friend of mine was running Phothoshop elements on a Desktop onder windows XP.
    Now his widow askes how she can run elelemt on het paltop running withw Vista.
    The old desktop isn't running anymore.
    She hast teregitrationnumber of Elelemt 9.
    How cann we do that

    I Will do that
    Thank you
    Verstuurd vanaf mijn iPad
    Op 18 feb. 2015 om 09:29 heeft pwillener <[email protected]> het volgende geschreven:
    How to re-install Elements 9 on Vista?
    created by pwillener in Downloading, Installing, Setting Up - View the full discussion

  • I downloaded Elements 11 to my laptop about 3 years ago and now purchased a new computer and need to install it.  How do I install Elements without purchasing it again?

    I downloaded Elements 11 to my laptop about 3 years ago and now purchased a new computer and need to install it.  How do I install Elements without purchasing it again?

    I have Elements pulled up on my old computer, can I find it in the program?
    No but if your old computer runs Windows then you can use the free Belarc Advisor software to extract the serial number from inside the computer.
    Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…
    Tip for future reference: when buying software, always keep your serial numbers safe and handy. Don't rely on websites, the Cloud or anyone else to retrieve them for you when you need them most. They are the single most important thing you get when you buy software and they are unique to you personally.
    You can download software installers from the web any time but, without your unique serial number, you'll be stuck with using the software in trial mode.

  • How can i install Elements 12 onto my new laptop?

    How can I install elements 12 onto my new laptop?

    If you registered the product with Adobe the number should be in your account.
    You will need to come here via your web browser
    https://forums.adobe.com/thread/1591513
    Then click on the red Adobe logo (top let on the page) and choose manage account. You should then be able to browse your purchase history and registered products.

  • How do I install Lion on new flash drive?

    How do I install Lion on new flash drive?

    For an emergency pocket size boot device?
    Or something else?
    Or, do you want to setup the Lion Installer for clean or reinstalls on flash memory card, which is what many use?
    Create an OS X Lion Install disc
    OS X Lion Install to Different Drive
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
    USB on Intel Macs has always supported booting, that is what MacBook users have had to deal with. With a Mac Pro you have four internal drive bays, Firewire, and all of those are more suited and capable.
    Old thread, never die do they.

  • Problems installing CS4 by flash/USB drive

    I purchased the DVD-Roms late last year to install CS4. The programs successfully installed on my laptop, which recently died and is in the shop. But I never was able to install them on the desktop and would like to do so. When I put the DVDs into my DVD reader (which doesn't normally have problems reading things), it grinds away but cannot read the disks. My attempted solution was to copy the programs on a USB drive. In disc 1 I selected "autoplay" and most of the programs are installed but still not useable until I can get the second disc to also install.
    Now I have a message, "Please insert Adobe CS4 Design Premium into drive E:\ to continue installation.
    - If I put the application disc 2 in the drive, it revs but does not actually read the disc.
    - On the USB folder sitting on my desktop for Application 2, my options are:
         -- extensions
         -- payloads
         -- autorun (Which sounds good. But I click on it and it just opens a text editor that says [autorun] icon=cs4_designprem_disc.ico)
         -- cs4_designprem_disc (Opens to show an icon/graphic)
    This is not a space issue because last time, I downloaded the "trial version" of CS4 from the website when it was available and then would manually enter my serial number. I wiped the hard drive. Now customer support says there are no links available online to CS4 since CS5 is soon available.
    Any suggestions on how to get application disc 2 installed too, from the USB drive if possible?

    Download on the iMac OS X Recovery Disk Assistant v1.0 and create a USB recovery disk.
    Use that USB disk to boot your MBP retina.
    Use the Terminal, that you find inside the recovery environment, to perform these commands
    Verifiy that the main internal disk is labelled /dev/disk0
    diskutil list
    this command will completely erase the internal disk. Please change /dev/disk0 if your is different, (it should not).
    diskutil eraseDisk jhfs+ "Macintosh HD" GPT /dev/disk0
    Verify that you just have 3 partition, no more Recovery HD partition
    diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            499.2 GB   disk0s2
    Quit Terminal and proceed with Reinstall Mac OS X
    It'll take a lot of time, depending on the speed of your internet connection.
    Please, do not hesitate to ask if you are in doubt

  • Attempting to install Windows 7 from USB drive keep receiving "No Bootable device -- insert boot disk and press any key" usb drive with windows 7 iso is inserted

    As the topic says, i am trying to install windows from a usb drive, when i click install windows and the computer reboots to install a black screen comes up with "no bootable device -- insert boot disk and press any key" the USB drive is inserted and pressing any key does nothing. Help?

    You need to follow these guides to install from USB drive
    http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed -100-working-guide/
    good luck

  • My C: drive is 4GB SSD & has no space. How do I install adobe reader on D: drive?

    My C: drive is 4GB SSD & has no space. How do I install adobe reader on D: drive?

    Download Reader 11 offline installer from below link
    http://get.adobe.com/reader/enterprise/
    and then launch installer by double click on exe.
    You will see 3 buttons on Install UI and the first button is "Change Destination Folder"
    By clicking on it, you can change the install location.
    I hope this helps.

  • How do I install DW CS6 in PC drive other than C:?

    How can I install DW CS6 in PC drive other than C:? I have "only" 6GB of space left in C:, and got an error message when I tried to put the Adobe Installer into another drive.

    Thanks, Mylenium...
    It's not about the cost of a new drive. I've already added 2TB over the past couple of years, and partitioned thim into higher drive letters. Most programs let me install them into those drives and still save enough in C: to be happy. But I'm uncomfortable messing with any root stuff. For some dumb reason, I partitioned the original drive (165GB) into 3 virtual drives (c,d,e) and the C: is only 60GB, which had 6GB free.
    I've temporarily offloaded a lot of files and now have 13GB free space. Maybe I'll try the install again tonight, as it takes many hours to download DW CS6. If that doesn't work, maybe I'll have to ditch the 165GB drive and replace with larger. Do you know of a program that will do that exchange without losing anything? The thought of having to reinstall a lot of legacy software that I still use is scary. And I don't have any spare SATA ports left.
    Thanks again...
    gvndmrk42

  • How can I install Itunes in the data drive and not in OS partition?

    My PC has a 3 partitions and I hace installed Itunes in the OS partition, very small. How can I install Itunes in the data drive?

    See Williams Lloyd's post > https://discussions.apple.com/message/15670671#15670671

  • Installing Sol10 from DVD - USB drive as flash source

    OK. First I managed to format the removable USB drive as UFS. Then I
    could mount it as a UFS drive and copy my flash archive file onto it.
    I've got another machine that I want to install Solaris 10 and use
    this flash archive. So I boot from DVD and was hoping to be able to
    specify the USB drive as location of flash archive. Trouble is even
    going into the mini-shell it doesnt seem to work.
    Any ideas? Or are there easier ways to do this?
    I did think of Jumpstart or specifying the flash location as netwrok
    drive or FTP but I dont think thats going to work. Trouble is first
    time around I had a job getting the network interface to work - not
    supported during the solaris 10 install but had to install a driver
    later.
    Is there any way to slipstream this driver into the Solaris 10
    install? (like you can do with windows)

    z92 wrote:
    I am trying to install Windows (8, specifically, but that has nothing to do with my problem) on my MacBook Pro 15-inch, mid 2009 (3.06 Ghz Intel Core 2 duo, 4 GB 1067 Mhz memory) running OS X 10.8.2.
    I have a Windows 8 ISO and a 8 GB USB drive, so it is my understanding that I should be able to create a Windows install disk on the USB drive using boot camp. This looks incredibly easy based on every tutorial I have found online, and if I got the screenshot they all show me, I'm sure I would have no trouble:
    However this is not the screenshot I get. Originally I was trying to do this last night on OS X 10.7, and I thought the issue might be with my version of bootcamp, but I have now purchased and upgraded to 10.8 and have the same issue with boot camp 5.0, that is my Boot Camp initialization looks like this:
    As you can see, I am missing the key option of creating a Windows install disk.
    I've exhausted my google-ing capabilities trying to find out why my Boot Camp does not give me this option, or trying to find a work-around, but it seems to create a Windows install disk from an ISO on a USB without Boot Camp can't be done on a Mac.
    Can anyone please help me resolve this issue?
    You are nearly right, it can't be done on a Mac that has an optical drive, and yours does. Burn the ISO to a DVD.

Maybe you are looking for

  • Beginning inventory

    Dear all, i have uploaded beginning inventory by 561,but now i find out the material 11111's value is wrong,for changing a better one it had been returned to supplier and their price is highter , if one of the material have been consumed,what can i d

  • Unable to open Notes

    I mentioned this in a similar thread in the iPhone 3Gs forum, but I have an iPhone 3G, so I figured I should post it here too. I am unable to access Notes: the app opens, displays a blank note for a few seconds, then crashes back to the main screen.

  • Run time error in cat2

    hi all what could be possible reasons for t-code cat2 to throw run time error urgent thanks in advance

  • Viewing MHT files with Mac OS X

    New to the Mac from PC and not very technical to boot. I am a student and need to view MHT files on my school's website. I can view them on my PC but not on my Mac which I would like to be using. Can anyone help? Thank you.

  • Adobe Photoshop and HP All in One 8180

    Since I set up my new 8180 - the prints from Adobe photoshop are grainy and not good at all - but if I print from HP Photo - the prints are very nice - not grainy - What do I need to adjust in order to get the higher quality print from Adobe on my 81