How do i install HP simplepass 2013 for windows 8 on my pavilion tx2000

please help me solve my problem with my PC as i am unable to setup my fingerprint password. I had formatted my pc a few days ago to install windows 8.1pro and now it does not show the option for setting up a fingerprint password

@Dominator112 ,
Hello adn thank you for posting on the HP support forums.  All you need to do is to go to the HP support page for your notebook and download the software.
If you system came with the operating system you have just installed then you will find the software you need.
If you have installed an operating system that did not come with that model you will not have the option to install that software.
The software and drivers are licensed to the notebook and the operating system that was sent with it.
If you have installed a full retail version of the operating system you have purchased from another vendor it may work as long as this system was distributed with the same operating system.
Here is the link to your notebooks support page where you will find all the software and drivers that have been released for your notebook. I hope you find what you need. 
HP Pavilion tx2000 CTO Entertainment Notebook PC - Software and Drivers
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Similar Messages

  • How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

    Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
    I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
    I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
    But reading more on it, I think I was supposed to use Bootcamp to do it for me...
    I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
    I had a partition so thought Bootcamp wasn't required for my needs.
    But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
    and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
    I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
    But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
    So I need to know the following:
    1) How to know I'm broadcasting my SSID - where do I find this in settings?
    2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
    3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
    One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
    And that is my main task - getting the Internet up and running in Windows 7.
    Other Info:
    I'm running Mac OS X 10.6.8 with 2 GB of memory.
    I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
    I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
    Hope you can help.
    Thanks.

    I tried something that worked for me...
    Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
    So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
    Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
    That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
    I didn't need the AirPoirt Utility at all (at least, I never went into it).
    Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
    Hopefully my solution helps others.

  • HT1461 Using a G5. I've installed windows 7. However, no sound. My copy of Lion 10.7.4 is a download (I have an install usb). How do I install the service preferences for windows 7?

    Using a G5 with Lion 10.7.4. Using boot camp have installed windows 7 in an equal partition and it appears to be running alright. Problem--no sound.
    My Lion install was from a online download. Since then have made a bootable usb. How do I install the windows service preferences from Lion?

    Not on a G5 because a G5 is a PPC machine and won't run anything past Leopard.

  • How do install the network adaptor for windows 7 with boot camp?

    How do I install the network adaptor for windows 7 with boot camp?

    boot camp forum: https://discussions.apple.com/community/windows_software/boot_camp 

  • Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    The wacom site will have the drivers for you.
    http://us.wacom.com/en/support/drivers

  • Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

    HI,
    I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
    Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
    Setup is unable to proceed due to the following error(s):
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Regards
    Anil Kumar

    You really need to do what error is suggesting.
    Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
    Nosh Mernacaj, Identity Management Specialist

  • How do I install software (specifically Office for Mac) on a MacBook Air?

    How do I install software (specifically Office for Mac) on my MacBook Air?  Thanks.

    Q7: How do I activate?
    A7: To activate the product, follow these steps:
    1. Launch application and click Enter your product key.
    2. Review the Software License Agreement and click Continue.
    3. You must agree to Software License Agreement. Click Continue.
    4. Enter your product key and click Activate. The Activation Wizard automatically contacts the Microsoft licensing servers through your Internet connection. When you activate the product by using the Internet, the product key is sent to Microsoft through an encrypted transfer. If you decide to activate the product through the Internet and you are not already connected, the wizard alerts you that there is no connection. Click either Activate by Phone or Activate later.  Note Do not lose the product key. Keep the packaging, or note the number. Keep the number information in a safe location.  Your product key is a unique sequence of 25 letters and numbers divided into groups of 5.  If you purchased a box with a DVD: The product is located on the back of the Office for Mac DVD sleeve.  If you purchase through a web site: The product key is sent to you in email with the title Microsoft Office for Mac – Order Confirmation”
    5. If the activation is successful, you receive the following message:  
    Your copy of <product title> is now activated.
    If for any reason the Activation fails, click Activate by phone. Select your location and then dial the phone number on the screen. For example, for United States: 1866-825-4797 or United Kingdom: (44)-(203)-147-4930. You can telephone an Activation Center to obtain the help of a customer service representative and activate the product. Telephone activation might take longer than activation through the Internet. You should be at the computer when you call. Additionally, you should have your software product key. When you select this option, the Activation Wizard generates an Installation ID. You musy have this Installation ID to activate the product by telephone.
    Important When you telephone the Activation Center, you are prompted to read the Installation ID numbers.
    Note Activation Center numbers are not listed for all locations in this article because telephone contact numbers vary by license and also by country or region. The Activation Wizard gives you the number to telephone the Activation Center.

  • Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

    I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

    Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

  • After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it?

    After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it? What apps can i download to do this type of work.

    .dmg.part is not a complete file..  It usually indicates that the entire file has not been downloaded yet.  Are you sure you downloaded the entire file?   (i recommend updating itunes through  > Software Update
    Alternatively, you can download it from here: http://support.apple.com/kb/DL1614

  • How do i install oracle plug-in for microsoft IIS ??

    how do i install oracle plug-in for microsoft IIS ??

    I'm not sure what is that plug-in that you talk about.
    If you mean the mechanisms that allows IIS to be the entry point to Oracle9iAS then you should probably ask this in the iAS discussion forum. or look for it in the online documentation on OTN.

  • How could I install a plug in for Aperture?

    how could I install a plug in for Aperture?

    OK no installer, not nice but not fatal.
    I assume you already downloaded the file from the web site. Locate it in the Download folder and double click it. That will extract the plug-in from the zip file.
    Now the tricky bit. The Library folder in your Home folder is no longer visible in Lion (thanks Apple ) There are ways around this the easiest is to open Finder hold down the option key and select Go from the menu bar. Your Library folder will be visible in the list of folders shown. Select it.
    You are now in the Library folder, select the Application Support folder and then select the Aperture folder.  If you have no other plug-ins installed you will need to create the Plug-Ins folder, do that. In the Plug-Ins folder create the Export folder. That is where you will copy the plug-in to.
    So open another Finder window locate the plug-in you extracted from the zip file and drag it to the Export folder. Restart Aperture and the plug-in should be visible in Aperture.
    Good luck.

  • Where do I find and how do I install the plug in for CS6 , automated picture packages?

    Where do I find and how do I install the plug in for CS6 , automated picture packages?

    Picture package does not exist for CS6.
    Mylenium

  • How can install adobe flash player for windows 8 pro internet explorer

    how can install adobe flash player for windows 8 pro internet explorer
    how can instal flash player for internet explorer metro ui 
    where can i watched video tutorial for this or help me please

    I can't tell from the screenshot, but it's possible you are running in the Metro version.  Could you try this page using Internet Explorer in desktop mode to see if that helps?
    right click in the browser and click the tools button
    In the menu that appears, select "view on the desktop"
    Once IE launches in the window, do you see your Flash content?

  • How can we Install MS Office 2013 product in Lenevo Laptop

    Hi,
    My query as per the subject line is, How can we install MS Office 2013 home & Business in Lenevo Ipad Z570 laptop. We being a company are having Dell laptops more & MS Office 2013 have been installed in all dell laptops but as we have 2 lenevo laptops
    MS Office 2013 is not being installed in it.
    Please Guide us on this ASAP..
    With Regards,
    Spoorthi Patil
    91-8050962896 

    Hi，
    Installation steps should be the same no matter in dell laptops or lenevo laptops, did you encounter any errors when you install this product in a lenevo laptop? What is the symptom and error message? Did you install singly or deploy in an organization.
    Plaese refer to this link, and take questions above into consideration 
    http://technet.microsoft.com/en-us/office/fp160948.aspx
    It is recommended to ask in this forum if it is more related with Office rather than an Client issue,
    Office Forum
    http://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
    Yolanda Zhu
    TechNet Community Support

  • How do I install Creative Cloud programs for others?

    Users in my network are not allowed to install or update software.  How do I install Creative Cloud programs for them?  They are also not allowed to have Adobe IDs.  This is all to be done by Network Administrators, like me.

    You would use CC for Teams, but install it via deployment tools. Still, you're gonne need Adobe IDs for every memaber of the team. There's no way around that part, even if you manage them yourself.
    Mylenium

Maybe you are looking for

  • How can i invoke an Oracle Report w/in a Java application?

    I have a custom java application that I would like to integrate with a report tool. I am reviewing Oracle Reports but I was not sure how I would integrate an Oracle Report. I have read that I can use Active-X but. Has anyone ever done this? Also - is

  • Q10 bbm display is blurry

    Just got a BlackBerry q10 and found out each time I upload a picture on the bbm display is always blurry. Please what would the issue be and how can I sort it? Solved! Go to Solution.

  • How do I get into iPhoto to free up memory when I can't get in due to no memory?

    How do I get into iPhoto to free up memory when I can get in due to no memory?

  • How to view crystal report 11 in ActiveXViewer Control

    I want to user Crystal Report XI with .Net 2.0 and I want to use Crystal ActiveX Report Viewer (client side control) in my Web Application. and wants to print the report client side. I am new to crystal report, If any one know, please help me.. Regar

  • WebServices + B2B Scenario

    hi all, i want to integrate BPEL & EIS(PeopleSoft). but i have little confusion tht which way i should use.i mean 1) HTTP - SOAP or 2) Adapters. It seems if its B2B Scenario then we should prefer Http - soap While for for internal infrastructure we s