How do I install instrument drivers in folders other than inst.lib?

I am trying to use an instrument driver I found from NI.com and I am having some issues with it.  I want to put it into a source controlled location (that isn't checked in yet) but it appears that it wasn't built to allow it to be put anywhere other than the inst.lib folder.  Are all instrument drivers written like this?
I got the LV2012 version below.
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=0203928FCCB74C96E0440003BA7CCD...
When I move it to our source controlled location I get "Warning: has been deleted, renamed or moved on disk" error messages.  All I did was unzip the files from the zip file I downloaded to the source control folder.  Is there a way to "install" these files to the source control folder instead of the inst.lib folder and have it work without an error message?
I just wanted to check this before I spend a lot of time making the library and project find the files.
Thanks.

JoeWork wrote:
Would putting an "inst.lib" folder under source control help if it isn't part of the absolute path that the library is looking for?
Nope.  They are looking in the special instr.lib folder inside of the LabVIEW folder.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

  • How do i install reader to a drive other than the boot drive?

    how do i install reader to a drive other than the boot drive?

    Hi nicksdaddy,
    There is an offline version:
    http://get.adobe.com/reader/enterprise/
    Hope that helps!
    Stacy

  • How do i install itunes on another drive other than c

    I would like to install itunes on a drive other than c drive in a fresh install to keep it free from my operating system.Itunes is not currently installed on my computer, so i dont need to transfer anything or move anything and i dont want to put itunes on a external hard drive as i just simply want to do a fresh install on a drive other than c drive. Can itunes accomodate me in this simple task.

    Install it normally, launch it with the Shift key held down, and create a new library on the desired drive. The iTunes application contains system components and therefore must be installed on the drive or partition containing the OS.
    (95467)

  • How do I install instrument drivers contained in LLB into Labview 8.6?

    I downloaded a third party Labview driver for a temperature chamber (Watlow) and unzipped it to find it had an LLB library. I can access all the VIs through the LLB manager, but how can I take those VIs and import them into Labview so that I can then find them in my I/O instrument control Palette? Since these VIs are in an LLB, I don't know how to take them out of there and put them into labview 8.6. Any suggestions will be very much appreciated.
    Thanks and regards,
    Rick

    Hi,
    I am trying to use a Diolan DL2-N USB to I2C/SPI/GPIO adapter (https://diolan.com/dln2). This manufacrures provides Labview drivers for the board as well as example VIs. I just want to use them to access to all interfaces via Labview. After that I will design a test setup for our last product line using this adapter board.
    What i did:
    1) Fresh install of Labview 2014 (evaluaton version). System: DELL Precision M6800 (i7) , Windows 7 Professional SP1.
    2) Install NI VISA drivers and NI-488.2 drivers (14.0).
    3) Install manufacturer drivers as explained in the link given in this thread.
    4) Run Labview. As said, I can see instrument driver VIs under the Function Palette and run example VIs.
    5) Run NI MAX. No USB ports listed. Only COM1 and LPT1 (printer port).
    6) I ran some windows test apps provided by the manufacturer to access to all the interfaces of the NXP microcontroller in the DLN2. Everything works. I can read analog/digital inputs, force digital out values and use the SPI and I2C (I see the SPI/I2C frame sin a scope).
    I have spent one day seeing different links in NI website (have seen almost every demo video on the site) and still are not able to guess why Labview can't see my USB device.
    Any hint?
    Regards,
    Jose

  • How do I install FF on a drive other than Win 7?

    I'm trying to conserve space on my SSD (small) and just have the OS (Win 7) on that drive. So how do I install FF on another drive, as so many of my other application programs are stored? They work great without any hitches, so far. . . But I would still like to try this with FF and Thunderbird. Thanks.

    Hi nicksdaddy,
    There is an offline version:
    http://get.adobe.com/reader/enterprise/
    Hope that helps!
    Stacy

  • HT1926 How do I install itunes to another drive, other than drive C

    Please help; I would like to install iTunes in my "new volume E" folder and it automatically installs in drive C. I don't see an option to change destination folder or an advanced option. ty

    If your library is properly self-contained then app updates should be saved in the iTunes Media folder. See Make a split library portable for details.
    The other main issue will be device backups which are stored on whichever drive is hosting your profile, normally C:
    Relocate MobileSync Backup folder
    You can redirect <Profile>\<AppData>\Apple Computer\MobileSync\Backup to a folder on another drive using NTFSLink (shell ext., might only work on XP) or Junction (cmd line tool).
    In essence you move the existing folder to a new location, create an empty folder where the old one used to be, then get the operating system to link the two together and silently redirect any file operation on the old location through to the new one.
    tt2

  • How can I install gutenprint drivers for my Epson Stylus Color 440?

    Good day all!
    I have and old and useful printer -Epson Stylus Color 440- and just bougth a cable for connecting it to USB port. Add a new print on its Print and Scan Preference Panel and it was recognized inmediatly, but I was told there was not any driver to that printer.
    Tried to set "Epson Stylus Color Series" on its driver but when I went to print, printer seemed to work but does not eject any ink. It seemed as if I were ran out of ink; its car moved over the places occupied by the photo and sounded as normal printing, but not a drop of ink. I checked on an older windows pc, and ink is full, printed normally. I also looked for its drivers on Epson pages, but it seems there are only available for previos Mac OSs, not for X.
    A son told me that in his Snow Leopard MacBook White there's a dirver called "Epson Stylus Color 440 gutenprint" on his Print and Scan Driver Menu; haven't tried to print from his MacBook yet, and as I searched, those are open drivers.
    I wonder if I can download and install that "Epson Stylus Color 440 gutenprint" from the web, of if there's a way to copy it from my son's Macbook, when he comes and check.
    Thanks in advance for your help.

    How can I install gutenprint drivers for my Epson Stylus Color 440
    Download then isntall:  http://gimp-print.sourceforge.net/

  • How Do I Install Apple Drivers For Windows XP?

    Okay, so I have a 15 inch mid 2012 MacBook Pro that is running OS X Mavericks. After many attempts, I managed to install Windows XP 32 bit as a secondary operating system on the HDD using Disk Utility. The only devices that Windows XP recognised upon the installation were the keyboard and the trackpad. I then inserted a Snow Leopard disc to install the Apple Drivers for Windows XP and it appeared as though the drivers got installed(the Boot Camp icon appeared on the taskbar next to the digital clock). However, when I restarted windows, none of the devices other than the keyboard and the trackpad worked. Does this imply that the drivers didn't get installed? If so, why is this and how can I install the drivers? If the drivers did get installed, why aren't the devices working? Please help me out, if possible. Thanks in advance.

    It does not work because you are running Mavericks and trying to use non-Mavericks drivers for an operating system (XP) that is not support on your hardware or your operating system.

  • How to move downloaded files from download folder to other relevant folder or how to download files in relevant folders other than download folder

    how to move downloaded files from download folder to other relevant folder or how to download files in relevant folders other than download folder

    Just drag the file from the Download folder to the folder of your choice in Finder. If you are using Safari you can designate a new default download destination in Safari>Preferences>General tab, 'Save Downloads to...'. Other browsers should have a similar option in their preferences.

  • How to copy images from iPhone folders other than camera roll?

    How to copy images from iphone folders other than camera roll?
    Images in these folders are synced to iPhone from different laptop and I need to download them in my laptop. I am able to download and access only those pics which are present in Camera Roll folder.Remaining pics are in different folder and also appearing in Photo Library from all folders.
    Same problem is with iPod touch as well.

    - Via a computer program like PhoneView or Touch Copy
    - By using an app like Photo Transfer

  • Can I instal Reader to a drive other than C:?

    Is someone able to tell me how to instal Reader to a drive other than C:?
    I am trying to free up space on C: and prefer to load the Reader files into another drive, but I did not see an option to do that when downloading, and the installer just starts automatically without prompting for a target folder.

    Use the offline installer from http://get.adobe.com/reader/enterprise/ and click on Change Destination Folder

  • How can i transfer songs from another itunes other than mine

    how can i transfer songs from another itunes other than mine

    Purchases made under 1 Apple ID are permanently associated with that Apple ID and CANNOT be transferred to another Apple ID.  So if you want to keep those songs, you'll need to always have access to your dad's account.
    B-rock

  • Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album.  How do I get them back together again other than a playlist.  I do not want the tracks showing up as albums on the Touch?

    Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album.  How do I get them back together again other than a playlist.  I do not want the tracks showing up as albums on the Touch?

    Are your tracks pat of a collection? Different artists, but still one album? Then mark them a s acollection or set the album artist. See this guide on how to group separate tracks into albums:
    iTunes: Grouping Tracks Into Albums

  • How to enable remote debugging for a session other than the current one

    Hi all,
    I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
    More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
    The docs indicate that I should be able to do so:
    dbms_debug_jdwp.connect_tcp(
    host IN VARCHAR2,
    port IN VARCHAR2,
    session_id IN PLS_INTEGER := NULL,
    session_serial IN PLS_INTEGER := NULL,
    debug_role IN VARCHAR2 := NULL,
    debug_role_pwd IN VARCHAR2 := NULL,
    option_flags IN PLS_INTEGER := 0,
    extensions_cmd_set IN PLS_INTEGER := 128);
    But when I try (even as sys), I get the following:
    exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
    ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
    ORA-06512: at line 1
    00022. 00000 - "invalid session ID; access denied"
    *Cause:    Either the session specified does not exist or the caller
    does not have the privilege to access it.
    *Action:   Specify a valid session ID that you have privilege to access,
    that is either you own it or you have the CHANGE_USER privilege.
    I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
    Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

    Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
    I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
    Regards,
    K.

  • IPDS install error on a port other than 389

    Hi
    I need to install iPDS on a port other than 389. During installation, when I give a different port and try to install, during the post-installation phase, I get error that the configuration information could not be updated and installation fails. I'm trying with iPDS ver 5.0. What could be the problem? I had iPDS installed earlier on port 389 on the same m/c. Can that cause a problem? I had uninstalled before re-installing on the new port.
    thanx and regards
    Sikka

    Make sure you use a port larger than 1024, if you are using a non-standard port.

Maybe you are looking for