How do I install Labview 64 bit support for the labview fpga module?

see subject.

Hi,
The LabVIEW FPGA Module uses the 32-bit version of the Xilinx tools, even on the 64-bit OS.
There is no 64 bit version of LabVIEW FPGA and you must have LabVIEW 32 bit
installed on your 64-bit machine to use the compatible version of
LabVIEW FPGA.
NI LabVIEW FPGA Module will run within the 32-bit emulation layer, Windows on Windows (WOW64).
regards,
Houssam Kassri
NI Germany

Similar Messages

How do you install a replacement keyboard for the laptop????

I can't find any instructions for installing a replacement keyboard for my PowerBook G4 1.33 Ghz. The instructions on the Apple website are for the 1 Ghz model and there is this slot thingy to the left of the NUM LOCK key. There is no such slot on mine so I have no clue how to install. And the replacement keyboard didn't come with instructions either. It seems that the entire case is one piece and the keyboard is embedded within. I tried pulling it up but I don't want to break it.
HELP. I have no key cap for L or F7 and C is on it's way out and I'm on deadline. Of course, it's Saturday as well.

Try the service manual which you can find here:
http://home.earthlink.net/~strahm_s/manuals.html

When will LabVIEW Drop Support for the NXT?

We currently use LabVIEW to program LEGO NXT kits in our engineering courses. However, LEGO is phasing out the NXT within the next year or two. Does anyone know the LabVIEW/NXT life cycle plan, i.e., when will LabVIEW no longer support the NXT platform?

Hi Joel777,
NI doesn't currently have a definitive roadmap for future NXT support in LabVIEW, but I recommend you check out the community page for updated modules. I would also recommend adding any feedback you have regarding future releases to this page in the comments section and periodically checking this page for support updates.
Rick C.

64-Bit Support for the rest of the CC apps?

As I am new to the CC suite, I noticed that not all the app are available in a 64-Bit version. For instance Muse and InDesign are not 64-Bit. Also parts of Adobe Acrobat are still 32-bit like acrotray.exe.
I was wondering if this will be addressed with the relaunch of the CS\CC suite as the new CC suite on June 17th?
If this has already been answered, then I am truly sorry. Thanks in advance for any assistance and answers.

@RORWessels – for InDesign CC, yes. It'll be 64-Bit.
See the feature set at:
http://www.adobe.com/products/indesign/features.html
But there is still a problem with the advertised feature set:
It should be "IDML" instead of "INX". A typo?
Did Adobe revive INX export? And dropped IDML? (I'm kidding!!)
Maybe it's my browser's cache, but Jongware stated the problem over a week ago at:
http://forums.adobe.com/thread/1206280?tstart=30
That should be fixed very soon.
For Muse CC I don't see something about beeing 64-Bit:
http://www.adobe.com/products/muse/features.html
Uwe

How do I install Geometers sketch pad for the mac? And is it free?

I have to download publisher and Geomters sketch pad for school, can I dowlaod it too the mac and is it free aswell??

Never mind, I've figured it out!

How many physical links does ios support for the same ip route entry?

6500/7600？12000？crs-1？
can etherchannel increase load balancing ways?

check out the following link on EtherChannel Load Balancing :
http://www.cisco.com/en/US/tech/tk389/tk213/technologies_tech_note09186a0080094714.shtml
hope it helps.

LabVIEW 64-bit support for modules and toolkits

I've just finished installing the 64-bit version
of LabVIEW 2009 under 64-bit Windows 7 Professional. However as noted
above very few toolkits and modules are available for this
version. Some of those MIA include MathScript, VI Analyzer, Advance
Signal Processing Toolkit, etc. I realize development and testing takes
time but think it's reasonable to ask that NI put up a table or chart
of toolkits and modules clearly showing which ones are
available/compatible with 64-bit LabVIEW, as well as timelines for when
these will be available.
(Apologies for cross-posting from the Ideas Exchange but that board doesn't seem to get much traffic...)

Hi Magma,
The Vision Development Module is currently the only module available for 64-bit LabVIEW. We currently have not released a timeline for other modules, but we are working on other 64-bit support. The links below summarize the current functionality of LabVIEW 64 bit.
LabVIEW 64-Bit vs. 32-Bit Applications FAQ
http://digital.ni.com/public.nsf/allkb/71E9408E6DEAD76C8625760B006B6F98
Announcing 64-bit LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/10184
Nick Keel
Applications Engineering
National Instruments
Nick Keel
Product Manager - NI VeriStand and Model Interface Toolkit
National Instruments

Unable to determine the install root path for the LabVIEW Runtime Engine

Hi,
i have an issue with using a LabVIEW interop assembly in a .NET application. I get an exception "Unable to determine the install root path for the LabVIEW Runtime Engine" when calling the assembly.
The little test program is attached below. It's called dotNETHost.exe. If you excecute the programm a dialog with an button appears. Clicking the button shall open another dialog (the LabVIEW Interop component). But the only thing I get is the exception message. The ZIP folder also contains the complete exception meassage (ExceptionMessange.jpg & ExceptionDetails.txt).
The Interop Assembly was built with LabVIEW 2011. We use Visual Studio 2010 and .NET 4.0.. The dotNETHost.exe.config file is prepared as mentioned in Knowledge base - Loading .NET 4.0 assemblies.
The Interop assembly contains only one simple dialog (loop is finished by clicking OK) without calling any other VIs or other DLL's. In case of this there's also no support directory generated by the build process.
I have no idea why it doesn' work. I hope anyone can help me.
Thanks in advance
Kay
Attachments:
Debug.zip ‏75 KB

This may be unrelated, but Labview and .Net4.0 dont work well together. Not yet anyway. I had to compile my assembly in 3.5 to get it to work.
Please read the following:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configuring_clr_version/
http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
http://digital.ni.com/public.nsf/allkb/2030D78CFB2F0ADA86257718006362A3?OpenDocument
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

How could I install a plug in for Aperture?

how could I install a plug in for Aperture?

OK no installer, not nice but not fatal.
I assume you already downloaded the file from the web site. Locate it in the Download folder and double click it. That will extract the plug-in from the zip file.
Now the tricky bit. The Library folder in your Home folder is no longer visible in Lion (thanks Apple ) There are ways around this the easiest is to open Finder hold down the option key and select Go from the menu bar. Your Library folder will be visible in the list of folders shown. Select it.
You are now in the Library folder, select the Application Support folder and then select the Aperture folder. If you have no other plug-ins installed you will need to create the Plug-Ins folder, do that. In the Plug-Ins folder create the Export folder. That is where you will copy the plug-in to.
So open another Finder window locate the plug-in you extracted from the zip file and drag it to the Export folder. Restart Aperture and the plug-in should be visible in Aperture.
Good luck.

After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it?

After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it? What apps can i download to do this type of work.

.dmg.part is not a complete file.. It usually indicates that the entire file has not been downloaded yet. Are you sure you downloaded the entire file? (i recommend updating itunes through  > Software Update
Alternatively, you can download it from here: http://support.apple.com/kb/DL1614

LabVIEW Embedded - Support for device: NXP (ex. Philips) LPC2146 Microcontroller (ARM7)

Hi,
I would like to write some code in 'LabVIEW embedded' 8.5 for the NXP LPC2146 microcontroller (ARM7).
http://www.standardics.nxp.com/products/lpc2000/lpc214x/
The 2146 device is used within one of our main 'volume' products and I would like to write some special test code for the product in LV Embedded. I have the full NI development suite at 8.5 level.
The question is, does LV embedded suport this microcontroller fully?
I have found this info but still not sure: http://zone.ni.com/devzone/cda/tut/p/id/6207
Many thanks in antisipation of a reply.
Andrew V

Hi Andrew,
Using the LabVIEW Microprocessor SDK, you can "port" LabVIEW to build applications for any 32-bit microprocessor. The LabVIEW Microprocessor SDK Porting Guide describes the steps involved in the porting process.
The amount of effort involved depends on these factors:
How similar your target is to one of the example targets that are included in the LabVIEW Microprocessor SDK. As you can see in the article you linked, the SDK contains an example target with a Philips ARM and an eCos BSP. If your target is similar to this one (especially if the OS is the same), the porting process might take less than a week.
Familiarity with LabVIEW and embedded domain expertise. The porting process involves writing "plug-in" VIs in LabVIEW and building C run-time libraries for your target. However, once the porting process is complete, your target can be programmed solely in LabVIEW by someone with no embedded expertise whatsoever.
Target selection. We recommend a target have the following characteristics: 32-bit processor, OS/microkernel (not "bare metal"), and 256 KB RAM. Also, if you plan to make use of the LabVIEW Advanced Analysis libraries, a floating point unit is recommended.
Michael P
National Instruments

How do I install 32 bit gcc on a OEL 5.8 64 bit system

Hi,
How do I install 32 bit gcc on a OEL 5.8 64 bit system
the command to check whether the required versions of the 32-bit and 64-bit glibc packages are installed is as follows:
rpm -q --qf '%{NAME}-%{VERSION}-%{RELEASE}-%{ARCH}\n' packagename
while I understand the package name is gcc, how do I know the name for its 32 bit counterpart?
thanks

Hi dude thanks a lot,
my objective: install oracle 10gr2 on oel 5.8 remotely. I've set up a virtualbox for oel 5.8
but right now I encountered another problem,
enterprise manager configuration failed due to the following error - invalid value null for parameter PORT
from Unable to start enterprise management console
and have rebuild the repository
oracle@source ~]$ emca -repos create
STARTED EMCA at Aug 30, 2012 6:00:08 AM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: orcl
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: Y
Aug 30, 2012 6:00:28 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/orcl/emca_2012-08-30_06-00-08-AM.log.
Aug 30, 2012 6:00:28 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Aug 30, 2012 6:00:28 AM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Aug 30, 2012 6:00:28 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/orcl/emca_repos_create_<date>.log for more details.
Aug 30, 2012 6:00:28 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/orcl/emca_2012-08-30_06-00-08-AM.log for more details.
Could not complete the configuration. Refer to the log file at /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/orcl/emca_2012-08-30_06-00-08-AM.log for more details.
[oracle@source ~]$
details for u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/orcl/emca_2012-08-30_06-00-08-AM.log is as follow
Aug 30, 2012 6:00:28 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/orcl/emca_2012-08-30_06-00-08-AM.log for more details.
Aug 30, 2012 6:00:28 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error creating the repository
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:194)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
118,1 Bot
here's my /etc/hosts profile
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
#92.242.132.18          source.localdomain source
192.168.0.211          source.localdomain source
here's my ifconfig settings
[oracle@source ~]$ /sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:EE:68:57
inet addr:192.168.0.211 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:feee:6857/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:180055 errors:0 dropped:0 overruns:0 frame:0
TX packets:323764 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:26740364 (25.5 MiB) TX bytes:62621397 (59.7 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:18198 errors:0 dropped:0 overruns:0 frame:0
TX packets:18198 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22512862 (21.4 MiB) TX bytes:22512862 (21.4 MiB)
would really appreciate some one could really guide me what's the solutions to the above EM confugration problem as I'm run out of ideas.
thanks a lot!

How fast can Broadcom 802.11n support for maximum?

hey everybody,i got U160 yesterday that the WLAN adapter is Broadcom 802.11n but i just got a connection speed of 65Mbps but i can get 150 Mbps with my G230 with intel 5100 bgn ,connecting to the same N-Router,so i am wondering how fast can Broadcom 802.11n support for maximum.......

if readycomm installed, remove it.
check your firewall is active and using high performance.
by the way, which model of broadcom are you using?

Does LabVIEW have support for entering Urdu language script?

Hi All!
My LabVIEW application requires users to enter their observations in a string control which is then stored in an excel file.
Now the issue is that the user wants to enter the data in Urdu language.
Now my question is, Does LabVIEW have support for entering Urdu language script in a string control?
If yes how can I implement this? If no, is there any possibility that National Instruments could extend some help in this regard upon request?
Regards,
Reeves

My experience from Hebrew, which is also right to left, is that it can be done if the operating system supports it, but it will work badly if you include anything in the text which is not an Urdu letter. This causes it to be displayed in the wrong side of the control and is only solved if you add more Urdu text after it.
One option you can try is including an ActiveX control (such as the rich text box) for editing the text and then you can probably get the text from it using a property. I don't remember trying it (my users don't usually need to input Hebrew text themselves), but I think it should work. I wouldn't have any hopes for NI doing anything about this, because it's considered to be a relatively small market.
Try to take over the world!

How do I install software (specifically Office for Mac) on a MacBook Air?

How do I install software (specifically Office for Mac) on my MacBook Air? Thanks.

Q7: How do I activate?
A7: To activate the product, follow these steps:
1. Launch application and click Enter your product key.
2. Review the Software License Agreement and click Continue.
3. You must agree to Software License Agreement. Click Continue.
4. Enter your product key and click Activate. The Activation Wizard automatically contacts the Microsoft licensing servers through your Internet connection. When you activate the product by using the Internet, the product key is sent to Microsoft through an encrypted transfer. If you decide to activate the product through the Internet and you are not already connected, the wizard alerts you that there is no connection. Click either Activate by Phone or Activate later. Note Do not lose the product key. Keep the packaging, or note the number. Keep the number information in a safe location. Your product key is a unique sequence of 25 letters and numbers divided into groups of 5. If you purchased a box with a DVD: The product is located on the back of the Office for Mac DVD sleeve. If you purchase through a web site: The product key is sent to you in email with the title Microsoft Office for Mac – Order Confirmation”
5. If the activation is successful, you receive the following message:
Your copy of <product title> is now activated.
If for any reason the Activation fails, click Activate by phone. Select your location and then dial the phone number on the screen. For example, for United States: 1866-825-4797 or United Kingdom: (44)-(203)-147-4930. You can telephone an Activation Center to obtain the help of a customer service representative and activate the product. Telephone activation might take longer than activation through the Internet. You should be at the computer when you call. Additionally, you should have your software product key. When you select this option, the Activation Wizard generates an Installation ID. You musy have this Installation ID to activate the product by telephone.
Important When you telephone the Activation Center, you are prompted to read the Installation ID numbers.
Note Activation Center numbers are not listed for all locations in this article because telephone contact numbers vary by license and also by country or region. The Activation Wizard gives you the number to telephone the Activation Center.

How do I install Labview 64 bit support for the labview fpga module?

Similar Messages

Maybe you are looking for