How do I install Leopard on the partition I've created on my MacBook Pro running Lion?

I've partitioned my hard drive (running Lion) so that I can run Leopard. How do I install Leopard on the partition? I've put in the Leopard CD and restarted, but all I get is a black screen with a bunch of gibberish.

There's no way the MacBookPro will boot to Leopard.
Snow Leopard may be possible, but you'd need the original discs from Apple customer Service - the retail disc isn't a high enough version.
To check viability of Snow Leopard, have a look at a.brody's article;
https://discussions.apple.com/docs/DOC-2455
If it looks like SL is feasible ring the Apple Customer Services with the model and serial no. and see if the original SL discs are available.

Similar Messages

How can I transfer data from DD & HD 3.5" floppies to my MacBook Pro running Lion?

I hope this is the correct forum group,
and if it’s not, I apologize. I didn't find
one that was really related to my topic.
I was given lots of legacy files (mostly Eudora email messages and other text files from 1995-2000) that I need to access from 3.5" diskettes (in both high density and double density formats) and reuse the data in my current environment:
MacBook Pro (v 4.1) running OS 10.7.
DHCP over TCP/IP home network with several PCs running Win XP, the MacBook Pro and 2 iPhones; and
iCloud is setup.
Also a Mac IIci loaded with OS 7.6.1, which hasn't been booted up in years, but I will try to do that next as I locate a video cable. (Please note that the files in question did not originate from this Mac IIci.)
Before I get too far down any path, can some one please tell me which route is the most feasible and practical to start with?
Resurrect the Mac IIci using it’s floppy disk drive to read the files, then:
Create access to my email and send myself the data;
Add the Mac IIci to the network in order to move the data;
Connect it directly to my MacBook Pro and migrate the files;
OR
2. Using am ext USB floppy drive, copy the files directly onto the MacBook Pro;
OR
3. A better approach you might recommend.
My questions may seem very naive as there might be compatibility issues using the Mac IIci due to the differences in the technologies, I would think. But perhaps it's doable?
If I take the second route, I will need to find a compatible ext floppy drive. I have scoured the Internet seeking one that is compatible for Mac and that can read both the 720 kB DD (normal or double density) as well as the1.14 MB HD (high density) formats. No luck. Most manufacturers do not specify whether or not they support the DD format. The ones that do are for PC. Any suggestions?
Sorry for being such a dunce about this. I would really appreciate some advice and being pointed in the right direction. Thank you for your time and patience.

Hi Kurt,
The Mac IIci is not even powering on at all. Tried again with wih a tested power cable and no luck.
I think it's best that take this issue to the Older Hardware Community. Not only did I see a fair number of replacement parts for the IIci avaiable online, but there also vintage external floppy drives as well. I'm not giving up.
Thank you for your time and interest in helping.

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Maverick for everything but the dictation software. I'm a new pie to apple

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple

To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

I have an iphone5 and a macbook pro. How on earth do you get the movies from your iphone onto your macbook pro!!!

I have an iphone5 and a macbook pro. How on earth do you get the movies from your iphone onto your macbook pro!!!

ah thanks nick, i have found this sentence a couple of times....
Turn on iPhone and connect it to your computer.
How do you "connect" your iphone to your macbook pro, the bluetooth just doen't work, is there a usb cable?

How can I get my macbook pro running Lion to print on my HP photosmart 309a??

how can I get my macbook pro running Lion to print on my HP photosmart 309a??

Did you install the drivers? Or have Software Update install them? This printer is supported:
http://support.apple.com/kb/HT3669

Have a MacBook Pro running Lion and an IMac running Snow Leopard. Want to Back up both images and restore on opposite machine. Essentially swapping images between hard drives. Is this possible and any "gotcha's" to look for? Thanks

Have a MacBook Pro running Lion (10.7.9) and an IMac running Snow Leopard (10.6.8). Want to Back up both images and restore on opposite machines. Essentially swapping images between hard drives. Is this possible and any "gotcha's" to look for? Thanks

If the MBP came with Lion, it most likely won't boot with SL. Easiest thing to do is create a bootable backup/clone of each to an ext HD, partitioned to hold each on a separate volume, ensure that the original machines can boot with their respective clones, and finally, try booting the other machine with the other clone. Images are useless since you can't boot with them to test them out.

My macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty.

my macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty. I had to try myself as I'm overseas for two months and nowhere near any sort of help .

there was a recent software update that seemed to screw HDV up. Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
Worst case scenario, do as Shane suggests. But might I suggest you take a look at the user tips section of the forum. there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

Keep downloading Firefox 6.0.2 for Mac (as prompted) to my new Macbook Pro, running Lion (OS 10.7.1) and it won't open and install. WTF?

I have Firefox version 3.6.22 (Mac) & keep downloading Firefox 6.0.2 for Mac (as prompted) to my new Macbook Pro, running Lion (OS 10.7.1) and it won't open and install. WTF?

something similar has been happening to me for a a couple weeks (even before the most recent update, but now is definitely worse) on my 2010 MacBook Air. Firefox freezes upon startup, and then freezes maybe every twenty minutes or so when I'm actively using it, staying frozen for at least a minute or two. it drives me crazy.

My Macbook Pro running Lion 10.7 will no longer connect to either my HP or Epson printers. Both printers report that they are connected to the correct wireless network and until 2 weeks ago work perfectly.

My Macbook pro running Lion 10.7 will not connect via a wireless network to either of my printers, Epson and HP. Both printers report an excellent connection to the correct network. The Macbook reports "printer not found"
Until 2 weeks ago all worked well. Both printers makes me think some setting in the computer must have changed.
Any suggestions?

System Preferences>Fax & Scan. Delete the printers and re-add them back in.

How can I move all my emails and mailboxes from my Powerbook 10.4 to a new MacBook Pro running Lion?

I have an older PowerBook (OS X 10.4.x) and I need to move all my Mail (including mail I archived to folders) to a new Macbook Pro running Lion.
Can I just move the Mail directory (/Home/Library/Mail) and com.apple.mail.plist from the Powerbook to the MBP?
I noticed that the Mail directory structure on the MBP is different in Lion than the Mail directory structure on my PB OS X 10.4.
I didn't want to overwrite the Mail directory on the MBP and find out I corrupted Mail on the new MBP.
Any advise would be appreciated.
Thanks.

The safe "step 1," of course, is to keep an unaltered copy of the 10.4 Mail folder and plist so that if something bad happens on the new machine, you just throw out that folder and plist and try again.
The safe "step 2" is that instead of dragging the folder into the same place on the new Mac, you can copy it to a separate location, like a temporary folder in Documents, then in Apple Mail in your new Lion MBP, use File/Import Mailboxes. It will ask you where the mailboxes are, and after you point it to that folder, I'm assuming it will import and convert them to the new format and place them in the correct sub-folders. If it goes well, you can then delete the temporary copy that you made for import purposes.
The 10.4 plist might be too old since it's 3 major versions later; you can try putting it in the Preferences folder, but it seems safer to note all the settings in 10.4 and re-enter them from scratch.

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

Can someone please help, I have a dvd disk containing lecture videos, on a Windows pc it works fine, and the disk opens to the dvd menu. However on my macbook pro running Mountain Lion, it opens as a data disk, with video and audio in two seprate files??

You may need a 3rd party application to view the DVD in a wWindows format such as
http://flip4mac-3.en.softonic.com/mac
https://www.macupdate.com/app/iphone/5758/vlc-media-player

I have a new macbook pro running lion and want to update the software on my ipod touch. My old macbook ran 10.4.11 and won't update - but the new computer says I have to update on the computer I normally sync on or my music will be lost. Solution?

I have a new macbook pro running lion and want to update to ios 5 on my ipod touch. My old macbook only has 10.4.11 and can't be updated to lion - and won't update my ipod touch to ios 5. But the message on my new macbook pro says I have to update on the computer I normally use for syncing or my music will be lost. Is there any solution for this?

try exporting your iTunes libary from the old computer to the new one
take a look at this from apple
http://support.apple.com/kb/HT4527
I am not sure you have home shareing with 10.4.11 but if you do it works very nicely
Mike

How do I use my Time Capsule to back up my wife's MacBook Pro running 10.4.

I just installed a Time Capsule. I've extended the range with two Airport Expresses. I've connected my MacBook running 10.6.3 to the wireless network. I've connected my wife's MacBook Pro running 10.4.11 to it. I've connected my wife's 3G iPhone to it and my first gen iPhone to it and our Apple TV to it. All devices can connect to the internet. I've connected the Time Capsule to the printer and printed wirelessly from both computers.
I've backed up my MacBook and seen that the Time Machine is backing up my MacBook as it should.
How do use the Time Capsule to back up my wife's MacBook Pro running 10.4.11? I've tried connecting them via ethernet cable and via USB cable. In both cases the Time Capsule failed to show up as an external drive and wasn't seen by the 10.4.11 back up utility.
How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)

James Elliott1 wrote:
How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)
That really is your best option. Sooner or later, you're going to have a problem with the "other" data on your Time Capsule, since the backups of your Mac will, eventually, fill up all the available empty space. That will, of course, limit the space available for the other backups.
There's a very cumbersome workaround in the blue box of #Q3 of the Using TIME MACHINE with a TIME CAPSULE *User Tip,* also at the top of this forum.
Another is to connect a USB drive to the Time Capsule, partition it if desired, and back up one Mac to it and the other to the TC's internal drive.

Two finger swipe was working for Firefox 7 in my macbook pro running lion yesterday but not today. i have installed Alfred. Has that broken it?

I was able to use the two finger swipe gesture on my macbook pro trackpad in firefox 7. It was working fine but has just stopped working. It does work if I hold the alt key while swiping but that seems a bit pointless. The only thing I have changed on my mac is that I installed Alfred. Has that broken the gesture?

Sorry to tell you this but it's starting to sound like a hardware issue.
Reason being is because youi've had this issue when you had 2GB of RAM, and running Leopard to Snow Leopard then to Lion.
Even after you've reinstalled everything it was still giving you issues.
Ok, try this one. Open the back of your MB, take one RAM out of the top slot, then turn your MB on and see if it still freezes. If it does, then take the lower RAM off the botton slot and install it on the top slot. Turn it back on. If the problem stops, then it could be your RAM slots.

How do I install Leopard on the partition I've created on my MacBook Pro running Lion?

Similar Messages

Maybe you are looking for