How do I install logic 9 on an older macbook pro ?

I downloaded logic 9 on my new macbook pro through to App Store. I want to also run it on my older macbook (Early 2008) currently using mac os x 10.5.8. How do I upgrade the Os X so it works and how do I install logic on the old one ?
- I can't go from 10.5 to 10.8
- I need at least 10.6.8 to run Logic Pro 9
- Once the Os X is up to date, how do I transfer the app, if possible avoiding downloading 20Gb again.

Hi just curious, how is Logic running on your new Macbook?

Similar Messages

  • How do I install windows from USB on Macbook pro 3,1

    How do I install windows from USB on Macbook pro 3,1 ?
    My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
    - My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
    I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
    Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
    Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
    After rEFIt I booted and then I got this error:
    Starting bootmgr.efi
    Error: Unsupported while loading bootmgr.efi
    I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
    Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
    Point: Nothing is wrong with the windows software, and windows runs fine.
    I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
    Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
    Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
    rEFIt - Booting Legacy OS
    Starting legacy loader
    Using load option ´USB´
    Error: Not found returned from legacy loader
    Error: Not found from LocateDevicePath
    (x 9 times)
    Error: Load Error while (re)opening our installation volume
    The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
    (Hey Apple please send out a updated firmware that fix this issue?!)
    So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ?  Or just run windows on the mac and forget about mac software ? What a stupid solution...

    There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
    This is 5 page thread, so a little more 'meat' to it:
    https://discussions.apple.com/thread/3410900?start=60&tstart=0
    And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
    What you have here seems to be everything and everyone is excluded unless there is a  mac-model device ID string that specifies yes.  An unnecessary hurdle.

  • How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

    How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
    My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
         -I have a flashdrive with win7 on it.
         -I mounted the ISO of win7 with toast for bootcamp to do its thing.

    Good luck.
    Consider this a bump so that hopefully someone with better news spots your thread.
    Allan

  • How can i install windows games in my macbook pro

    I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

    As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
    As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

  • HT1338 how do i install adobe flash player on macbook pro

    how do i install adobe flash player on macbook pro?

    Download the player from the link that Allan provided.
    Doubleclick the downloaded file to mount the .dmg file.
    When a window opens with the 'Install Adobe Flash Player', doubleclick that file to start the install.

  • I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)?

    I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)? It does not have a CD drive.

    If all else fails, try this.  i used to do it all the time before. might or might not work with the new office.
    if you have access to another computer with a cd/dvd rom, copy the entire contents of the cd on a thumb drive.
    insert the thumb drive in your MB and do the install from there.
    However, if you have the newer version of MS Office, Bandit's suggestion is much better.

  • How do I install Internet Explorer on my Macbook Pro?

    How do I install Internet Explorer on my Macbook Pro?

    Virtual Box free, Windows 7 Home Premium System Builder SP1 $92.
    IE9 is and can be secure and work just fine and I do prefer it to others, but Firefox lets me work in Apple Community easier is all.
    Safari still bogs down trying to open multiple tabs, isn't multi-thread efficient, isn't memory efficient or well behaved - beyond the advandages of keeping code in memory it is still a memory hog. Open the same 20 tabs in any other browser is the best way I know. I also don't trust Google that much for security, I consider Google tracking and adsense to be a nuisance. Firefox gives some semblance, especially with add-ons, to tracking, cookies, privacy, and blocking content the best.
    Exploring IE
    Tracking Protection IEBlog
    Comparison of VMware Fusion Parallels VirtualBox
    Comparison Fusion and Parallels
    VirtualBox
    Oh, and MacBook Pro?
    MacBook Pro
    MacBook Pro Apple Support
    Or if you want to explore Safari:
    Safari
    Apple - Support - Safari

  • I recently bought an iPhone 6   how do i install iWork's on my macbook pro for free?

    after buying an iPhone 6.  how do i install iWork's on my macbook pro for free?

    My reading of the offer is the iOS versions are free with an iOS device, and the Mac versions are free with a Mac purchase.

  • Install logic on my new macbook pro 2012

    Hi guys,
    ive been scrolling the internet for days and actually can't find the solution to my next problem:
    I bought the new macbook pro 15" running mac osx 10.7.4.
    now i want to install logic 9 on this computer. Before this i've already been using logic on two computers, my Mac Pro and my older macbook pro (2008).
    I installed logic pro 9 as in upgrade to Logic pro 8.
    Ive tried installing logic pro 8 on the new laptop but it wont let me, says the new macbookpro doesnt support this program anymore.
    Now ive tried installing logic 9 on the new macbook pro and it wont allow me. It wont accept my product liscence, I've tried it a hundred times, but it just wont let me.
    Im not planning on using the older laptop anymore, should i uninstall logic from it? If so... how come i can't find the location of the liscence?
    really hope hearing from u guys soon....
    AJ

    Allan Doyle2 wrote:
    Try this..
    Copy the logic 8 icon from you old system to your new MB Pro application folder then try to install LP 9..
    Let us know result.
    I think the OP will need to try and run L8 after he copies it, enter the serial for L8 then install the L9 upgrade.
    Logic 8 will run in Lion, it just won't install because the L8 install uses some PowerPC code that needs the Rosetta emulation. Lion doesn't do Rosetta.

  • How do I disable airplay on an older macbook pro?

    I have an older macbook pro (model is mid-2010) with Mountain Lion installed.
    When my Apple TV is on, my computer keeps trying to connect to it via Airplay.  But Airplay is not supported on my macbook pro and the sound stops working.
    How do I disable my Mac from connecting to Airplay?

    Do this test with the Apple TV on:
    If you go into System Preferences > Sound > Output, which line is selected?
    If the Apple TV is selected, can you select Internal Speakers? Will it stay on?
    With Internal Speakers selected, do you get any sound output?

  • Installing new SSD into older MacBook Pro and Organization Questions!!?

    Hello,
    I am about to pull the trigger on a new Samsung 840 Pro 512gb ssd for my older Macbook Pro 5,3 with 2.66 Intel Core 2 Duo.
    I need some advice or at least point me in the direction of where I can read up to date info on properly executing the install of my new ssd.
    A little background:
    I have a Seagate 500gb external hdd that has many older pictures/videos on it as well as my "just about full" 320gb hdd on this computer that will be getting the 512ssd.
    Any comments/suggestions a to how I can organize all of this and have it in one accessable place? (I was planning on installing the 512ssd on this computer, putting everything on the 512ssd and then wiping the external drive and using it as a backup periodically in case something went wrong with the new ssd I would be installing on this computer.  Follow me? Any help/advice would be greatly appreciated.
    I've been telling my wife that we NEED to replace this drive before we lose many of our important pictures and other items on it.  We have used 319gb of which 45gb is still available.  I am nervous as this hdd is about 6-7 years old?
    The pictures/videos are the most important to us and do not want to lose them.  Thanks, in advance, for your help!

    How to use an SSD with your HDD
    If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
    After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
    Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu.
    You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
    When the computer boots up it will now be using the Home folder located on the HDD.
    Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
    Be sure you retain the fully bootable system on your HDD in case you ever need it.

  • How do I install a driver on my macbook pro

    How do I install a driver on my macbook pro

    ECastrillo,
    it depends upon the driver. Which driver are you trying to install?

  • How can I install Sims 2 on my Macbook Pro?

    I can't figure out how to install Sims 2 on my Macbook Pro.. Anyone know how?

    That game is over seven years old.  It can't run on any mac in OS X that has 10.7 or later installed.  Are you trying to install in OS X or in a Windows partition?  Also, what happens when it tries to install?  If it mentions something about "PPC", it can't run in OS X. 10.7 or later.

  • How can I transfer information from my older MacBook Pro to my new MacBook Pro?

    How can I transfer information information from my older MacBook Pro to my new MacBook Pro? Does anyone have an answer because I spoke to 2 people at Apple & both sent me the wrong cables.....

    Did they mention Migration Assistant?  You can use MA with FireWire, limit is the speed of the older unit.  MA will guide you and allow you to choose what to transfer.

  • How to create Install OS X Yosemite for MacBook Pro Retina Early-2015

    HELP ME! Unable to Boot from Install OS X Yosemite USB
    I just bought a new MacBook Pro Retina 13" Early-2015 and wish to install Windows 8.1. I created Windows Install USB using Boot Camp and Installing Windows. Unfortunately, I erase all SSD by accident.
    I created Install OS X Yosemite 10.10.2 USB as guided at https://support.apple.com/en-us/ht201372 using my MacBook Pro Retina Late-2013.
    This USB works perfectly on my MacBook Pro Retina Late-2013 but I am unable to boot from Yosemite 10.10.2 Install USB on my new MacBook Pro Retina Early-2015. The white stop sign appeared on black screen all the time. I am stuck here and can't reinstall OS X Yosemite on my new MacBook.
    I also can't use Recovery boot as the SSD had been erased.
    Please help to show me how to create OS X Install USB that can use with my MacBook Pro Retina 13" Early-2015

    Boot the MBP with the OPTION + COMMAND + R keys.
    It should result in a display with a revolving globe.
    If you follow the directions, it will connect you to the Apple servers and you will be able to install the original OSX that came with your MBP.
    You will need a solid Internet connection.
    Ciao.

  • How do I install garageband on my new macbook pro without paying for it since it didn't come pre installed?

    I bought a new 13" MacBook Pro with retina (mid 2014). It didn't have pages, keynote, numbers and garageband pre installed. I managed to install all except garageband. How can I get that installed without having to pay for it since it was supposed to have come preinstalled?

    Click here and contact Apple.
    (126910)

Maybe you are looking for

  • Issues after downgrading from Acrobat X Pro to 9.5.2 Pro

    Hello, I have Adobe Acrobat 9.5.2 Pro and decided to install Acrobat 10.0 Pro trial. When the trial expired, I decided that I didn't want to purchase it and have since been using Acrobat 9.5.2 Pro; however, I've encountered two errors that I have not

  • 3.5mm to 2.5mm adapter for E71

    Hi I am at wits end with fnding a dongle type adapter for music. 2 ring, 3 ring.. I bought a 90 degree 2 ring adapter from Tandy that did not work. I may need a 3 ring type. Is there a  3 ring type 90 degree adapter with a short wire (like a dongle)

  • How to remove the following from N97?

    Hi, I reported on these on Ovi Store and used there "report issue", but regarding these default things that are annoyingly useless on my device by default I couldn't complain there. I need to remove Boingo, Qik & JoikuSpot. Every application on N97 h

  • RSS screensaver

    Hello all, I have my screensaver set to show RSS newsfeeds. In Tiger it would show 10 feeds before starting again, while in Leopard it shows only 4. Anyone would know how to change this back to 10 per round? I thought it might be the source of the fe

  • Circle Masking

    Hello! I'm starting on flash and I already manged to do some simple effects but i am not getting this one: Circle Masking Effect tutorial I manage to do the masking effect and I even see it action using live preview... But when I export the movie to