How do i install mac os 10.4 without disk 2 of install?
wife's ibook got full of stuff and i went to the genius bar and they recommended "erase and install'. i thought i had all the disks, but i'm missing disk 2 of install disks. i have 10.2 install disks, but only the initial install disk of 10.4. now i'm to the page where i need the 2nd disk. what do i do?
Hi Kelly and Welcome to Apple Discussions...
If you have the Tiger disk, 10.4, just use that. You don't need to go back and use the 5 install disks that came with the iBookG4. My iBook came pre-installed with Panther 10.3. I've seen upgraded to Tiger 10.4.11.
Shut down the iBook completely. Now, while holding down the C key, press the power button and insert the Tiger disk all at the same time. If the disk comes back out just gently push it back in again. Keep holding down the C key until you see the Apple logo on the screen. At some point, an Installer window will open. Just follow the instructions. BUT, before you ERASE the drive, make sure you have copied all the important data, (images/video/audio/documents), first before doing so because when you erase the drive, it's all gone permanently. When you are done, get online with the iBook and use Software Update to do the updates it will need. Also, after you do the Software Updates, run Disk Utility from the Applications/Utilities folder and Repair Disk Permissions. Don't forget to eject your Tiger disk and store in a safe place.
* Do not do an Archive & Install. The drive is already "stuffed" as you say. It's probably a 60GB drive... it's easy to fill one up, I know, I have one.
Carolyn
Similar Messages
-
How do i reinstall mac os x from the disk to reset the system and to delete the admin passwords
hi guys iv recently got the mac os x install disk from applecare and iv started the system but to reinstall the os its asking for a admin password which i dont have hence the reinstall how do i get around this???
OS X: Changing or resetting an account password
Reset mac mini admin password: Apple Support Communities
Forgot Mac Password? How to Reset Your Mac Password (with or without CD) -
How to stop my mac from ejecting CDs without even recognizing them.
My mac OS X version 10.9.4 ejects any CD i insert without recognizing it even in Finder. How can I get my Mac to read CDs?
Barney-15E wrote:
The reason it spits them back out is because it can't detect that it is an optical disk. There is no way it will read them even if they stayed in.
Give baltwo's suggestions a try, but you may have a failed drive.
Hmm, I wish that my Mac Mini would spit the CD back out. I spent a few hours the other night burning CDs to my Mac. This particular one was apparently so badly beatin up, that it didn't like it. It didn't mount in Finder or in Disk Utility.
I took the CD drive case apart only unable to find a paper clip to push the emergency button in. Thankfully I started Windows via VMware and was able to eject it from there.
If I didn't have Windows, was there anything else I could of done to force the Mac to eject the CD? It's an external Slimtype BD E DL4ETS drive.
KOT -
How to reset your Mac OS X password without an installer disc
I totally forgot my password and i dont have the installer disc because i have the 13 inch. what can i do ??
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear. -
How to format and reinstall 10.6.8 without disk
How to re-format my HD and reinstall 10.6.8 without a disk?
Can't be done. You have to either call AppleCare if you lost the original discs, call the seller of the machine if it wasn't Apple and say the discs belong to the machine and have them call AppleCare if they lost the discs. If clone your hard drive with Superduper or Carbon Copy Cloner upon purchasing a Mac with 10.6 you can always restore the clone at anytime. And before considering upgrading, note 10.7 and above lack Rosetta:
https://discussions.apple.com/docs/DOC-2465
https://discussions.apple.com/docs/DOC-3761
Macs newer than March 15, 2010 can't use the retail 10.6.3 installer, and must use the 10.6 installer that was pre bundled with them to install 10.6, if not a clone, and if pre bundled with some version of 10.6. Prebundled with 10.7 Macs can't install 10.6 unless their actual hardware refresh date preceded 10.7's July 20, 2011 release. -
How can I install adobe without admin password ?
May someone please teach me how to install adobe without admin password ? I can't remember the password ! Thanks in advance !
Reset the password
OS X: Changing or resetting an account password
Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Reset mac mini admin password: Apple Support Communities -
Can someone help me i bought a macbook os x and it has a password to login but the person i bought it from does not know the password so im stuck with a macbook that i cannot login ? it there a way to reset it? ALSO I read that you can restart it with the cds and i got some but the disk drive does not work !
Forgot Your Account Password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password, OS X Mountain Lion- Reset a login password, and
OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself -
i have a mac mini early 2009 and i want to install 8 gb ram but it doesn,t work.
it says on the OWC site that i have to install the EFI firmware 2.1 update but it won,t let me,it says(the mac mini)that i don,t need this update.
my kernel is 32bit but my EFI is 64 bit,how can i install 64 bit so i can use the 8GB cause with 32 bit i can,t use more than 4gb ramCheck your computer's EFI Boot ROM version;
1. From the Apple () menu, choose About This Mac
2. Click More Info Under Contents
3. Select Hardware
If your Mac mini's Boot ROM version is the following or more recent, then you do not need the update to use 8 GB of RAM;
Boot ROM Version: MM31.0081.B06 -
Late in August 2011 I took delivery of a new 27" iMac with Lion preinstalled. I need to run Windows as well. Following Apple's written suggestion, I printed off the then current 12 pages of the document "Bootcamp Installation & Setup Guide" which clearly stated that the hard drive you were going to install on had to have on it, before install, a maximum of one partition. Using finder and disk utility I determined that there was only one partition. Unbeknownst to me, there was (is) an additional hidden (from those two pieces of software) partition on the disk. As of machines delivered new with Lion preinstalled, Apple has begun to include a "recovery partition". In that partition there is a copy of the software necessary to reinstall Lion via a download from the Apple App Store. Not knowing the partition was there, I cranked up "Bootcamp Assistant" which nicely offered to repartition my hard drive creating a "Bootcamp Partition" in addition to the existing. I told it how big to make each and hit the do it button, subsequently destroying my operating system. Oh, it very nicely told me, after the damage was done, how many partitions were REALLY on the disk and that I could not install Bootcamp cause there were too many partitions.
Luckily the the Recovery Partition, which at that point I knew existed, was not harmed and after doing some research on another compter, I used it to once again download Lion from the App Store and reinstall. So, I have recovered but am still stuck with the problem: how do I install Bootcamp in this new environment?First you need to seriously back up your Mac.
A clone is an exact duplicate of your existing Mac HDD. Merely copying and pasting a drive will not make a bootable backup. In case of problems you can boot from an Ext HDD clone and use the utilities to repair, reformat, or clone the Ext HDD back to the internal Mac HDD. While Time machine back ups are easy you can not boot from it. The best thing to have for any kind of problem is a bootable clone backup on an external drive. Some even have two external backup drives in case one fails. There are two good apps for cloning named SuperDuper and Carbon Copy Cloner.
In dealing with the recovery partition a simple approach is to clone the Mac partition to an external disk then re-partition the Mac to a single partition (GUID partition table) . Then clone the external disk clone back to the Mac. You will now have only one Partition and Boot Camp assistant sould not object.
Some have recommended getting rid of the recovery partition while others have advised not to do this. If you have the Lion USB Thumb Drive you do not need a recovery partition so can discard it without concern. There is another way to get rid of the recovery partition if you decide to do it but first be sure to have a backup of your Mac ( I know I sound like a nagging mom but many dead computers have been saved by this simple precaution).
Use Disk Utility.
1) Make the Recovery visible in Disk Utility by using a program like Secrets:http://www.macupdate.com/app/mac/27025/secrets or MacPilot:http://www.koingosw.com/products/macpilot.php (15 day free trial).
2) Highlite the Recovery partition and Control click it and select Mount the partition.
3) With the Recovery partition highlited, erase the partition, you'll get an error message, ignore it.
4) Now highlite the top identity of the hard drive and select the partition tab.
5) Highlite the Recovery partition and press the minus sign.
6) Click and hold on the bottom edge of the partition above and drag it to the bottom, if it doesn't go there automatically, the press apply. -
how do i install windows 8 on a late 2012 mac pro?
Follow the directions here http://www.apple.com/support/bootcamp/
-
Greetings!
I have moved to a new system running Mac OS 10.9, and I am able to run Photoshop CS6 and InDesign CS6 without having Java installed on this system. Sadly, I receive the following error message when I try to start Illustrator CS6 (version 16.0.4, not the Creative Cloud edition).
To open “Adobe Illustrator CS6,” you need a Java SE 6 runtime. Would you like to install one now?
I searched the the forums and read that some users can run Illustrator CS6 without Java SE 6 (or Java 7) by removing FXGFileFormat.aip and FXGFileFormatUI.aip from Illustrator’s Plug-ins folder. Removing these plug-ins makes no difference on my system. I am still prompted to installed Java SE 6 after I try to start Illustrator CS6.
How can you use Adobe Illustrator CS 6 without having Java SE 6 installed?
Thank you for your help.
JJJI wish I had an answer...it seems this issue is throughout my CS 6 programs. I can no longer even start a program.
-
How do i install photo shop elements 11 on mac book pro with no disk drive
i bought adobe photoshop elements 11 about a year ago. and want to install it on our mac book pro but not sure how to, as the mac doesn't have a disc drive , any information is greatly appreciated
Download, install, and use your serial number to activate...
PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html -
How can I install my cs6 on my mac without the disc?
How can I install my cs6 on my mac without a disc? I lost it, but I do have the codes.
Download the trial from here and activate with your serial number. Be sure to following the Very Important Instructions:
http://prodesigntools.com/adobe-cs6-direct-download-links.html
If you have already activated on two computers, then you’ll need to call/chat with Adobe to have them deactivate one. -
how can i install windows game on my mac. actually i download a cricket game 2009 how i can inastal in mac
It will never run in OS X. You need to install Windows on your machine.
-
How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media
Hi.
You simply can't. Snow Leopard is compiled in Intel binary only.
Good Luck.
Maybe you are looking for
-
hi, In my client system a custom view is maintained for MM* transactions I have added two custom fields in MARA table as well as this custom view. Now i have to populate value for this two custom fields. i am using "/AFS/BAPI_MATERIAL_SAVEDATA" to up
-
I'm designing a digital 12 hour clock using TTL. I'm using decade counters to increment the time for the seconds, minutes, and hours. My problem is for the hours: The hours of a normal clock usually reset when hitting 12 back to 1. The logic for this
-
from last 3 days i am trying to my best to use facebook in my i phone 4s but still i am failture to contect,i can able to use my facebook account on my pc or laptop but not in i phone,i remove facebook so manytimes and also reset all setting but sti
-
Address Book 3.1.2 excruciatingly slow
Hello, I recently imported about 150 vcards into AB 3.1.2. Address book has always been slow but now it is extremely slow and I get the spinning rainbow wheel of horror. When I edit records and tab from one field to the next, it takes 10-15 seconds t
-
How can i get the facebook app on my iphone 3 without being able to have IOS 4.3?