How do i install Mac OSX Leopard on other drive

how do i install Mac OSX Leopard on a drive other than my Snow Leopard computer? I need to access old files that will not open with new OS.

Simple. When you get the prompt to install Snow Leopard on your existing computer you will see a button that says "change destination disk..." or words to that effect.
You can select any mounted volume. If that volume already has a later version of OS X installed, you will need to erase it first using Disk Utility.

Similar Messages

Installing Mac OSX Leopard Server 10.6 on a Mac Air

Hi
Im trying to install Mac OSX Server 10.6 on a Mac Air which have Lion developer preview 4 on it, i try to install from
a .dmg file thats stored in the downloads folder when it runs it give me a message "resturt to begin installation" with a
restart button, i click it and then computer restarts and nothing happens why ?
also the server file is big 7 GB so i failed to burn it on dvd or copy to external hard disk and install from there

You will want to use a external double-layer (DL) DVD disk that you've recorded, or use an external disk configured to boot the distro.
Also make a full backup of your boot disk before you load this, as there is no "downgrade" option to get back to whatever version of Snow Leopard client you might be using on the box.
Please (also) read the HT4313 support article.
And for completeness...
This particular configuration isn't supported by Apple.
Mac OS X Server doesn't "like" DHCP addressing, and that can be common on portables.

Adobe Reader 9 Silent Install Mac OSX Leopard

When I try to install the pkg silently (I want to distribute it on all our machines) nothing seems to happen. I'm running leopard on intel.
This is what i try to do:
installer -pkg AdbeRdr90_en_US_i386.pkg -verbose -target /
this is my result:
installer: Package name is Adobe Reader 9
installer: Upgrading at base path /
installer: Preparing for installation.....
installer: Preparing the Disk.....
installer: Preparing Target Volume
installer: Preparing Adobe Reader 9.....
installer:
installer: Installing Adobe Reader 9.....
installer:
installer: Configuring Installation
installer: Validating package
installer: Writing files
installer: Writing files: 0% complete
installer: Writing files: 0% complete
installer: Running Installer Script
installer: Writing package receipt
installer: Finishing Installation.....
installer: Finishing Installation
I'm worried about the lines :
Writing files: 0% complete
Has anyone seen this problem before? When I run the install manualy so by clicking on in the finder the install just runs fine.
Many thanks in advance!
Bjorn

Hi Bjorne,
Looks like I've got the same issue, only with Flash Player 9 Silent installer on Mac OSX Leopard. Did you find a workaround?
Stuart

Can i Install Mac OSX Leopard 10.5 /10.6 ?

Hello guys,
I've bought about 3 weeks ago an iPhone 3G. Since i have my iPhone i like to produce software for the iPhone with the developers kit from apple. But i have one problem. I have an Acer Aspire notebook with:
4GB memory
Intel Processor (2,2 GHZ)
Ati Videocard
Windows Vista Premium
Can i Install Mac OSX on this notebook ? Maybe with dual boot.
Best Regards,
Theodoor de Wit

A slightly different perspective from what others have already posted:
Even assuming there were no licensing/legal problems with this & you could somehow successfully hack the OS & SDK to install & run on your Acer, would you really want to try to use that as a development platform for iPhone apps? It would be like trying to build a sturdy house on an uncertain foundation: you would never know if or when the whole thing might collapse or how to tell if the fault was in what you built or not.
If you want to develop for the iPhone, invest in a Mac. If you are any good at it, judging from the success stories you could quickly & easily make back the cost of that investment & much more. Even if you don't, you will have a very well made & supported computer running what is arguably the most stable & user-friendly OS on the planet.

I'm trying to install Mac OSX on an external drive with my Mac Mini

A few days ago, I picked up my new Mac Mini. I'm using the install disk included with the Mini in an attempt to install Mac OSX 10.4.5 onto my external hard drive - a LaCie d2 200GB.
The installer knows the LaCie is there - but it won't let me install it there. I had no problem doing this with my last Mac (Power Mac G4). Does anyone have any suggestions?
Mac Mini Duo Core 1.66Mhz Mac OS X (10.4.7) LaCie d2 Firewire Hard Drive 200GB

If you are using an Intel mac mini you need to change the partition scheme. Without doing this the Intel Macs cannot boot from the drive.
To do this you need to open Disk Utility, select your drive (not the partition), then select the Partition tab. In there you'll see an Options… button. Click on it and change the partition scheme to GUID Partition Table. Click OK and then apply the reparitioning.
Please be aware that by making this change you will be able to boot your Intel Mac from the drive although a PowerPC drive will no longer be able to use the drive as a boot drive.

How do you install mac osx snow leopard 10.6.3

when installing on my pc it says i need intel what do i do to install the snow leopard 10.6.3

To clarify, Mac, Macintosh, are names for machines made by Apple Inc, as well as the operating system that will run on those machines.. If you don't see on the machine either the Apple logo, which has the icon of an Apple with a leaf out its top, and a crescent bite taken out of it, or the name MacBook followed by Air, Pro, or nothing it won't install Snow Leopard. iBook, Powerbook, PowerMac are all older models that don't support Snow Leopard. Machines by Compaq, Dell, HP, Toshiba, Gateway do not support any Mac OS. It would help to know what you are running. If you are running a Compaq, Dell, HP, Toshiba, or Gateway, you can get a new Mac Mini for as little as $600, and used or refurbished one for less. If you need help finding a used or refurbished Mac, we can give you resources for what will run Snow Leopard.

How do I install Mac OSX Lion client on the new Mac Mini Server?

If Apple would have had the quad-core processor option for the non-server Mac Mini, I would have just bought that, but I wanted the quad-core. I do not, however, need the server software. I found this article talking about how to disable the server functionality, but this article highlights how little that method actually does.
Ultimately, I just want to do a clean reinstall like I used to do prior to Lion. This process used to be so easy. Create a disk image of the desired operating system on USB, option boot, and you're done. Now it appears that Apple purposely impedes this process, as every time I boot from the USB I created with Mac OSX Lion client, I get a circle with a line through it. Is there any way around this restriction? Editing firmware, editing .plist files, etc?
Very disappointed that Apple is limiting what used to be such a simple process on Hardware and Software that I paid for but now can't get the functionality I want.

Sorry to be the bearer of bad news, but what I don't think you can do what you're asking for. Closest thing is going to be disabling the server components like it says in the article, but again, that doesn't do much.

Hello, i want install mac osx leopard 10.5 but error in installing

i need guaid help for error install mac os x v10.5 leopard
i dont install it because send error

What is the error. Does your Mac conform to these requirements?
support.apple.com/kb/SP517http://
Ciao.

How to install Mac OSX on New Hard Drive (No Disk)

I have a new Hard Drive that I just received and I'm looking to install it on my Early 2009 17 inch Macbook Pro. The problem is I dont have the original disk that came with my macbook. I do have a 2TB external HD so is there anyway I can back up Maverick on there and install it on the new Hard Drive without having the original Disk?

If your machine is running Mavericks with the old drive, just connect the new one in an external enclosure. Boot to the Recovery partition by holding the Command and R keys at startup. Run Disk Utility to prep the new drive, exit Disk Utility and install Mavericks.
You could also do the external enclosure and use Carbon Copy Cloner to copy your existing drive to the new one.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1395317179&sr=8-3&keywords=2.5+enclosure

How to Clean Install Mac OSX

How can I clean Install a Macbook Pro running OSX Mountain Lion?

Restart with the Option key held down, tab to the recovery partition, press Enter, and use the Disk Utility to either erase or repartition the internal drive. Install the OS onto the blank partition or an external drive.
(71312)

How can I install Mac OSX on a computer with no OS

I just bought a PowerMac G5, but it has no OS and the graphics card is shot. I have tried booting via Firewire, but nothing showed up in Start Up Disks. What can I do?

Try to find one on e-bay but if you buy the gray disks be careful as they are machine specific and will have to be for a G5.
If you buy the full retail version these are black and will work on most machines.
Just ask questions or find out what OS X version your G5 came out with.
Travis

I am trying to format my macbook pro hard drive and every time I get a window that says "Cannot instal Mac OSX on this Hard Drive." What do I do?

The only options it gives me is to restart or restore from back up which isn't what I want to do... HELP?!

Provide information relative to the issue like which MBP model, what OS is running on it, what OS are you trying to install on it and where did you get the OS installer disk from then perhaps someone could help.

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

HT1338 I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working, what can I do to fix's this?

I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?

Run Software Update to get to 10.6.8 and update Java.

I want to go back to Snow Leopard but I get "you have to install mac osx.app 23.1.1

I have a new 21.5 iMac I just purchased July 9 so I was able to download Lion for free under the up-to-date program. After installing Lion I decided I wanted to go back to Snow Leopard for various reasons. When I restart with the original Snow Leopard DVD that came with my machine and holding the C key down, I get the window for Mac OS X install DVD. I click the icon to install SL and another window pops up stating "You can't use this version of the application. Install Mac OSX.app with this version of Mac OSX. You have to install Mac OSX.app 23.1.1" To answer the question before hand....I don't have a time machine backup.

Thanks for all your help guys. I had trouble with my first install of Lion, it seemed buggy and when I tried some of the suggestions you offered, my machine did not always react the way it should have. I thought that was weird because it's a new iMac, only three weeks old. Pondini pointed me in the right direction and I think Lion is stable now. This worked after a few tries, not sure why I wasn't getting consistent results but it worked eventually.
1. Shut the computer down.
2. Hold "command" and "R" and turn on the computer (I believe this is recovery HD from the internet because it wasn't working from my hard drive)
3. After a few unsuccessful tries, and repeating #1 and #2, I finally got a window to reinstall Lion. This took about an hour to download and after that things went as expected.
As long as Lion is more stable than it was on my first install, which it seems to be now, I'll just stay with it. After this experience, I would say "make sure you need the features in Lion, and that all your current programs are compatible with Lion before you forge ahead."
Thanks again

How do i install Mac OSX Leopard on other drive

Similar Messages

Maybe you are looking for