How do i install my gamepad logitech F710 on my mac?

I have a gamepad Logitech F710 and a macbook air with the newest OS. How get i work the gamepad? Do i need a software? From where?

It's only supported on Windows. You might be able to get it to work partially using third-party software called "USB Overdrive" or "SteerMouse." Otherwise, use it in Windows with the vendor's software, or get rid of it.

Similar Messages

  • How do I install the Gamepad Xbox 360 on my Mac?

    I downloaded a file so I can use a Xbox 360 gamepad on my mac (http://tattiebogle.net/index.php/ProjectRoot/Xbox360Controller/OsxDriver), and it seems to work fine, but the Gamepad I bought (wich is connected by an USB cable) isn't recognizing the Gamepad. It's written : No Device Found.
    Do you know where is the problem ?

    Windows 7 RC will expire today.
    Description of Windows 7 Beta and Windows 7 Release Candidate (RC) expiration dates and functionality 
    If you would like to continue using Windows 7, I suggest you purchase an Official version. 
    You can consider installing Windows 7 with Bootcamp on MAC computers.
    Apple - Mac OS X - Windows Compatibility - How Mac works with PCs 
    For more information regarding Bootcamp, please contact Apple support.
    Contact Apple Support
    Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Arthur Xie - MSFT

  • How do i install windows 8 on a late 2012 mac pro?, how do i install windows 8 on a late 2012 mac pro?

    how do i install windows 8 on a late 2012 mac pro?

    Follow the directions here http://www.apple.com/support/bootcamp/

  • How do i install a dell 1130 printer to my mac xo s laptop

    how do i install the dell 1130 printer onto my mac xo s

    Hi there hunna1139,
    You may find the information about setting up printers in the article below helpful.
    Mac Basics: Printing in OS X - Apple Support
    -Griff W.  

  • I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

    I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • How do I install Creative Suite 5.5 on my Mac Book Air?

    How do I install Creative Suite 5.5 on my Mac Book Air?
    I have a Creative Suite 5.5 Design Standard CD and I need to install it on my Mac Book Air. Please Help.

    Download the Trial version from http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
    Enter your serial number to convert the Trial version to a full version.
    Note: Follow the Very Important Instructions on that page first otherwise the links will not work.

  • How can I install the HP 8600 plus to my Mac 10.9.2 in order to scan???

    HELP!!!
     How can I install the HP 8600 plus to my Mac 10.9.2 in order to scan???

    Hi,
    Please try the following package:
         http://ftp.hp.com/pub/softlib/software12/COL51752/oj-125213-2/HP-Inkjet-SW-OSX-Mavericks_v12.34.37.d...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I install a airport extreme card in a mac pro (Intel 2008)

    How do I install a airport extreme card in my mac pro (intel) 2008 computer

    What Wifi Cards Do Mac Pro 2008 model use???
    http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

  • How do I Install or re-buy iPhoto for my Mac when the app can't lunch?

    How do I Install or re-buy iPhoto for my Mac when the app can't lunch?
    The App Store does not let me buy iPhoto from scratch nor update it. I used the original Applications Install DVD to re-install iPhoto, and the icon appeared but the app could not be used because iPhoto 2.1 is not compatible with the Mac operating system OS X (10.9.2)? I thried to update manually through apple support, and a notification of unauthorized licence did not let it happen.  What is this? What happened with my iPhoto? What can I do to solve this and safe my photos? I'm willing to pay for it, but even the app store say that it can't becuase it was suppousely bought through another account? Please help!

    Not launching is probablay not a software issue - it is probably a data issue
    No - iPhoto 2 version 2.1 is not compatible with Mavericks - or pretty much anything else - you need to purchase iPhoto '11 version 9.5.x from the App store
    LN

  • How do I install visual basic for applications on my mac?

    How do I install visual basic for applications on my mac?

    You can't.
    Read how can i download visual basic on mac??

  • How i can install Mavericks on new HDD because my mac hdd broken

    i have macbook pro A1286 hard disk damage . i buy new HDD and fix it on my mac , then how i can install Mavericks ?
    i try many times but i cant finish this problem because i cant access to disk utilities or recovery mood because already the hdd is new&empty .
    Please Help
    [email protected]
    Thanks

    It's going to be impossible to install Mavericks unless you have a working Mavericks-USB-installer or an  "install OS X Mavericks.dmg" that YOU have downloaded from the App Store in the past.
    You should use a Snow Leopard install DVD to install 10.6.8 Snow Leopard on your Mac. From there, you can use your  "install OS X Mavericks.dmg" to install Mavericks. If you don't have that, you can download and install Yosemite from the Mac App Store instead.
    If you don't have either a Snow Leopard install DVD or a custom made Mavericks-installer-USB, you should call Apple and buy a Snow Leopard install DVD from them. They're still for sale.
    The other option is to use another, still functioning, Mac and connect the two using a firewire cable. Then you can use Target Disk Mode to install Mavericks or Yosemite on your Mac http://support.apple.com/nl-nl/ht1661

  • How can I install Windows7 -64BIT on a 1st Generation Mac Pro 2.66GHZ Quad?

    Hi,
    I posted this in Bootcamp but haven't received any replies so I am reposting it here where perhaps it really belongs.Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz?
    Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
    I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all the installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
    When I try installing 64 bits, I never get past the "select cd rom 1 or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
    Problem is it's all Windows based with exe files and presupposes I already have Windows running.
    I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows 7 users successfully installing Windows 7 on a 1st Generation Mac Pro.
    Thanks.
    Mac Pro 2.66GHZ Quad Core

    I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
    Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
    1. Update Snow Leopard
    2. Place the Windows cd in the Super Drive
    3. Shut down the computer
    4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
    5. Boot the computer holding down the Option key
    6. Boot to the Windows cd
    7. Install Windows and format the drive to NTFS
    8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
    9. After Windows installs, place your Snow Leopard disc in the Super Drive
    10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
    11. Go to Start > All Programs > Apple Software Update
    12. Update again until it's done.
    13. You'll also find a BootCamp under Control Panel, check it out.
    14. Shut down the computer and replace the hard drives in their original order
    14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

  • I just downloaded lion how do I install it on my other iMac and Mac books.

    And how many computers can I install them on? Thanks.

    babowa wrote:
    If you read the applicable paragraphs of the licensing agreement, it is not at all a grey area - at least as far as the rules Apple has decided to set. It's just that most people don't read the licensing agreement.
    And, to make things worse, there are two different sets of rules:
    1. If you upgraded from another (earlier) OS, the Lion license is NOT transferable to the buyer of your Mac. Original OS to be re-installed and disks supplied to buyer - doesn't matter how you upgraded.
    2. If you purchase a Mac with Lion preinstalled, you may make a onetime transfer of Lion to the buyer of the Mac if you sell it.
    You can download the SLA here:
    http://www.apple.com/legal/sla/
    Add: As for machines being for sale on ebay, etc: simply ask the seller if it came with Lion; if not, does he know that he has to supply the previous OS disks and wipe Lion. That would be what I'd do if I were to ever get a Mac on ebay (I know better than to trust buying one there).
    I'm glad I only buy from the Apple Online Store! I think I'd go mad trying to figure out all the legalities! lol
    Thanks for the info, though, I think a few people will be interested in how this works

  • I bought an online upgrade to Lion osx which is installed on my macbook.  How can I install the same purchase on my desktop mac or do I have to pay twice?

    I purchased an online upgrade to Lion OSX and installed it on my macbook pro.  How can I install that purchase on my desktop mac or do I need to purchase again in order to be able to sync all my devices?

    Login to App Store with the ID that bought Lion, using any other machine you own.
    Option+Purchases.
    Re-download.

  • How do I install right click to windows running on mac

    I recently installed windows 7 on my Macbook Pro Retina and cannot right click on windows programs! how do I install this?

    Look in Control Panel -> System -> Boot Camp -> Track Pad tab.

Maybe you are looking for

  • Managing / Using several NSUrlConnections at once & network performence

    Hi, I am using several (5-10) nsurlrequests and therefore have a two questions. 1. Should I wait for each connection to finish or cancel until the next connection wants to start? 2. If I should handle my connections in a "stack" - how should I do thi

  • Juddering on final disk

    I have made some slideshows in iphoto08 and sent them to iDVD08 which exports them as qt movies. I then created a menu and linked each slideshow to a button on it. The final result looks great on my computer but after burning the disk I find that the

  • Phone re-activation

    I need to re-activate my sons iPhone 4S I dialed the star228 and they told me they were closed today.  He's going away and I'd really like him to have his phone

  • Trouble downloading pdf

    I am unable to download pdf. I downloaded adobe reader yesturday. I turned my computer on today, I opened up a pdf file and it DID OPEN, I tryed opening another file and it DID NOT OPEN, I tried opening the one that did open and again, IT WONT. I cli

  • How can I improve the performance of SSO in BOE XI R2?

    I have SSO AD single sign-on setup for infoview but it takes very long for a user to get into infoview once they select the hyperlink to infoview.  How can I decrease the amount of time it takes a user to get into infoview when having SSO AD configur