How do I install new CS5 if I have CS3?

I have currently CS3 installed on XP, am going to install new CS5 (not an upgrade!). Do I uninstall CS3 first or install CS5 first, then uninstall CS3? Thanks muchly!

Doesn't matter. The order is up to you and whether or not you uninstall CS3 is up to you.
CS5 will install into a separate folder to CS3 so you'll be able to run both.

Similar Messages

  • How can I install Photoshop CS5 on a new iMac with no disc drive

    How can I install Photoshop CS5 on a new iMac with no disc drive?

    Hi,
    Please copy this Link http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1.dmg?PID=2159997
    Now open Adobe.com and go to Products Trials. Click on Acrobat Try now and once the download page appears then paste the above mentioned link in the address bar and then press Enter. Download should start immediately.
    Please let me know if it helps.
    regards,
    Abhijit

  • How can I install new windows on NB200-10z without a CD drive?

    Hi,
    I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
    I would like to do a recovery, but it also doesnt work.
    I know there is a shortcut like press the 0 button when the laptop is starting up.
    With this shortcut you can start the recovery to reset the software.
    But when I press the 0 button it gives me an error.
    So I think the recovery drive/partition is lost.
    How can I install new windows on this minilaptop without a CD drive?

    I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
    The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
    Before you begin, you will require the following:
    USB Flash Drive (4GB minimum)
    Windows 7 ISO Image file
    UNetbootin
    Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
    Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
    Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
    Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
    Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
    +Message was edited: link has been removed+

  • How do I install new themes for keynote purchased throught the app store?

    I have downloaded some Keynote themes fron a site but I have no way (that I can see) to install them. I've done extensive googling and I always find instructions that say that I have to add the downloaded themes (.kth files) into the ~/Library/Application Support/Keynote/Themes folder. However, I have no such directory.
    I purchased Keynote via the App Store. Could this be the reason why I don't have this directory on my hard disk? How does one install new themes then?
    Thank you.
    While I am at it and since there must be a lot of Keynote experts around, I'll ask another question about a problem that is driving me crazy. I'm one of those thousands of new converts and I have a lot of old PowerPoint files that took me a lot of time to create. I'm trying to import them into Keynote but some of them are giving me trouble. The problem comes when I try to change the theme (I just want to change the background). When I have complex slides involving many objects, if I change the theme all these objects abandon their original positions and everything becomes garbled. I think this has to do with the aspect ratio of the slides but I haven't found any way of fixing it. No matter what size I choose in the Theme Chooser, the result is the same.
    I would really appreciate any help you people can offer with any of these problems. Thanks in advance.
    JM

    OK, I'll answer myself since I found an answer to my first question. It was right here in the forums. I'll post a link to it in case someone reads this thread looking for an answer:
    Using 3rd Third Party Themes - The Manual Way to Import
    Now, if I could just find an answer for my second question...
    JM

  • How do i install new office software?

    how do i install new office software?

    More information would be helpful, such as hardware and operating system.
    Allan

  • Macbook pro mid 2006 (Intel Core Duo) how can I install new OS ? I cannot update the 10.6.8 and new software doesn't work anymore

    Macbook pro mid 2006 - how can I install new OS ? I cannot update the 10.6.8 version and new software doesn't work.

    A Core Duo Mac can't be upgraded past 10.6.8.
    (123371)

  • How do I activate Photoshop CS5 once I have installed it?

    How do I activate Photoshop CS5 once I have installed?

    If it is not prompting you to activate it then check to see if there is an option to activate under the Help link in the main menubar. 

  • How to uncheck "install new versions automatically" from INTERNET EXPLORER 11 from SCCM 2012

    We have deployed "Internet Explorer 11" application  through SCCM 2012 console .the deployed application was customized using "Internet Explorer customization wizard 11" tool.
    issue:
    we are getting  "install new versions automatically" check box as checked
    when we see from help about  "about internet Explorer"
    seeking solution:
    how to uncheck "install new versions automatically" check box from SCCM 2012 console.
    please let me know if we have any solution for this instant
    thanks,
    Gc.Hanumareddy

    Hi,
    For option: "install new versions automatically", we can simply prevent it via GPO or registry (the registry entry can also be deployed via GPO)
    Computer Configuration - Administrative Templates - Windows Components - Internet Explorer - Install new versions of Internet Explorer automatically
    Or
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main]    
    "EnableAutoUpgrade"=dword:00000000
    Yolanda Zhu
    TechNet Community Support

  • How can I install my CS5 onto my MacBook Air?

    How can I install my CS5 onto my MacBook Air? I have my serial number, but I can't find anywhere to download the program on the Adobe site. The physical CDs are useless w/MacBook Air.
    Thanks!
    Emily

    The physical disks are OK with MacBook Air if you buy a cheap external DVD drive and connect via USB. That's how I install DVD software on my MacBook Air.
    That said, you can download the software from http://prodesigntools.com/adobe-cs5-direct-download-links.html
    Follow the Very Important Instructions on that page first otherwise the links won't work.

  • HT1208 Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Use it the same way as previously.
    ctrl B shows the menus.
    ctrl S shows the sidebar.
    What else do you need help with?

  • How i can install the products  that i have in my contract on my laptop?

    how i can install the products  that i have in my contract on my laptop?

    Make sure your laptop meets the system specifications for the software.  Then download and install the CC manager program, sign in using your authorization code, and install the programs that your contract supports.

  • Geotagging - how can I edit new places that I have previously created but with typos, errors etc?  How do I delete a place I have set up?

    Geotagging - how can I edit new places that I have previously created but with typos, errors etc?  How do I delete a place I have set up?  Then I could create a new, correct entry.  I'm using iPhoto '09.

    Is it OK to reply to my own question?? Thanks to the related posts that appeared AFTER I'd made the post above, I learnt about the 'Manage my places' item under the Windows menu. I felt a bit dumb not knowing this.
    BUT it doesn't completely resolve the issue.  The info shown in the EXIF (using opt-cmd-I) under Places has the place name I choose, but it is followed by a few other lines that are incorrect and do not seem to be anything to do with any data I can see under 'Manage my places'.
    Can anyone explain where these other entries might come from, and how to edit them?

  • I am running Leopard 10.5.8 and want to partition Windows 7. The windows 7 I have is not a cd, I downloaded it. How do I install if I don't have the Windows 7 cd AND I don't have a PC to create a USB or CD?

    I am running Leopard 10.5.8 and want to partition Windows 7. The windows 7 I have is not a cd, I downloaded it. How do I install if I don't have the Windows 7 cd AND I don't have a PC to create a USB or CD?

    Thanks Fred. So I bought Snow Leopard, also installed ALL updates to now 10.6.8
    Problem: when I start my Boot Camp (3.0.4) it does not let me use a USB. I have been reading your article that I can be on a later Boot Camp but somehow Apple is not leading me where to actually download this Boot Camp Assistant upgrade.
    Keep in mind: every update on Apple about Boot Camp has been .exe which is useless to me since I do not have Windows installed.

  • How do I install Adobe CS5 on a new, non-disc featured laptop...

    I own Adobe CS5. I have the discs and serial number. My old laptop died and I replaced it with a new non-disc featured laptop. How do I 1) download my CS5 suite and 2) then upgrade (with a discount) to CS6?

    you don't need to install cs5 in order to install your upgrade.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How do I Install old CS5 onto my new Maverick??

    How do I install my old CS5 onto my new Maverick?

    Download and Installation Help
    Download the software, install then enter your serial number.

Maybe you are looking for

  • Windows 7 no longer boots after upgrade from Lion to Mountain Lion

    I got a late 2011 MacBook Pro, on which I installed Windows 7 with Boot Camp. After I upgraded from Lion to Mountain Lion, I can no longer boot Windows. If I keep the option button pressed during boot I only get the OS X and recovery options, and if

  • Media Card Repair + Back up failing

    Hi everyone, I've been trying to back up my phone for a while now and I have been trying to upgrade the 7.0 bundle to 7.1. However, when I connect my BB on to the PC and start the back up it lags when it reaches the "Card options". Yesterday the back

  • Video freezes during call

    Hi, Hoping you can help. I have a fairly new computer, with plenty of space on it (Windows 7m core i7, 4gb) and live in japan with superfast unlimited fibre optic, i think about 300mbs/second- or something like that.  When I make calls to other peopl

  • Drop dbf file and then recover - possible?

    We have to 'startup mount' our database and then 1. alter database datafile ....12.dbf offline 2. recover using backupcontrolfile until cancel. Can we do this on oracle 9.1.7

  • Jdbc connection pool for oracle problem - not creating

    hi, iam not able to connect to oraclepool, iamusing weblogic 5.1 ,i started the server but i am able to connect oracle pool iam getting a sqlexception as Sat Jul 22 01:46:09 PDT 2000:<I> <JDBC Pool> Creating connection pool oraclePool with: {refreshM