How do I install original system software on a replaced MacMini Hard Drive?

My Mac Mini model A1347 Hard Drive crashed last week. I drove 250 miles to an Apple Store which did not have a replacement drive in stock and was too busy to fix it if they did, so they referred me to an authorized technician in the area. He had a drive, but not the time to install it. But he was kind enough to give me very precise instructions which I followed carefully and now have the drive installed and apparently running fine. I also have a very good Time Machine backup for this computer.
Now - my question is how to I reinstall my software on this computer, since the new drive is blank? I have the original install disks, but the instructions assume I want to reinstall over the existing system, or erase and replace it. Nothing about putting it on a new drive.
When I start up the computer, it asks me for a startup drive (the ?? icon). When I put in the original install disk, the Apple logo appears and it starts trying to load, but never does, and eventually my monitor goes to sleep with nothing happening.
Any trick I'm unaware of?
I've also tried the startup with the C key down. Same thing.
Thanks.

You did not tell us what version of OS X you were using. If it was Mountain Lion then you should be able to boot from your Time Machine backup as follows:
Boot Using OPTION key:
  1. Restart the computer.
  2. Immediately after the chime press and hold down the
      "OPTION" key.
  3. Release the key when the boot manager appears.
  4. Select the disk icon for the Time Machine backup drive.
  5. Click on the arrow button below the icon.

Similar Messages

  • HT3606 how do i get a recovery disk or download for os 10.5.8?  my system was installed by an apple store when replacing my hard drive.  i did not get a backup disk.

    how do i get a recovery disk or download for os 10.5.8?  my system was installed by an apple store when replacing my hard drive.  i did not get a backup disk.  macbook is a 1.1 from mid 2006 and 10.5.8 is as far as i can go..  use this as a utility backup when my new macbook pro with mt lion screws something up---which seems like a daily event. do i have to install a lesser version of leopard then install the update.  does software update even work anymore for leopard?  im so in the dark and when i look at the console i just freak.

    Hello, your best bet would be to clone your drive to an external drive, which will be bootable.
    Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/
    You're not likely to see any updates show up for 10.5.x
    The very first MacBook 1,1s can actually run 10.6, which is updatable to 10.6.8, but will only run in 32 bit mode on yours.
    http://www.everymac.com/systems/apple/macbook/specs/macbook_1.83.html
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57

  • I had photoshop installed fine.  We had to replace our hard drive, but had a full backup and everything else is working except for elements.  This is the message I get -Some of the application components are missing from the Application directory, Please

    I had photoshop installed fine.  We had to replace our hard drive, but had a full backup and everything else is working except for elements.  This is the message I get -Some of the application components are missing from the Application directory, Please reinstall the application.  I have reinstalled, but am getting the same message.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can also try to repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • I can't find how to redownload Acrobat Pro X. I had to replace my hard drive and have to reinstall all my apps.

    I can't find how to redownload Acrobat Pro X. I had to replace my hard drive and have to reinstall all my apps.

    http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  • How to I restore lost audiobooks from iTunes after replacing my hard drive?

    After replacing my hard driver I put my apple ID and password into iTunes and was able to re-download all of my music but I was not able to get my audiobooks. Does anyone know how I can do that?

    Hello
    do you have multiple itune account ?
    answer is certenly here
    http://support.apple.com/kb/HT2519
    take care of that
    Notes:
    To download previous purchases on a computer, your computer must be authorized for the Apple ID that was used for the original purchase. For more information about iTunes Store authorization and deauthorization see,this article.
    Items that have been refunded by iTunes Store support cannot be downloaded again and will no longer show on your Purchased page.
    HTH
    Pierre

  • How do I authorise my Imac for Itunes after replacing the hard drive?

    Dear All,
    Apologies, but I am new to forums and understand that the issue of "Authorisation" of Itunes purchases and rentals has been done to death!  However, I have tried everything and have exhausted normal research on the Net, there doesnt seem to be standard sollution to my problem.   I have replaced the Hard Drive in my Imac 2008 with an SSD which makes the Imac very fast and effcient and completely clean of the usual trash in an old computer. So before renting my first movie, I did the following:..................................
    Formatted the hard drive and downloaded and upgraded to OSX to 10.5.8 (the latest I can go on this Imac (I think) Intel 3.06Ghz 2 core and 4GB SSDRAM) 
    Upgraded Itunes to the latest available
    Upgraded Quicktime to the latest available.   
    I rented a film which will not play and initially I got the "not authorised on this computer" message which kept repeating despite saying it was "waiting"
    So I did the usual apple support search and tried the following:..................................
    I checked that my apple User ID and password where up to date and that I was purchasing on the right ID
    Tried the standard.....Itunes/Store/Authorise this computer  -  tried unauthorising and then re-authorising No luck
    I tried deleting the  (/Users/Shared/SC info) file  No luck
    I tried the Terminal based solution  "sumo chmod -R 777 /Shared/Users" fix It didnt work either
    I don't get the authorisation warning any more but just get a black screen with a grey horizontal stripe across the middle
    I would be very grateful if somene could give me another sollution to try............................
    Thank you very much,
    Sfithy

    Double & triple check that you installed the hard drive correctly. 

  • How to install original 10.5.5 disk on erased hard drive in macbook pro

    Macbook pro 5,1 late 2008 was running SL 10.6.8
    Formatted hard drive in target mode from a mavericks mbp (mid 2012)
    original 10.5.5 disk will not install.
    gray screen with question mark press option and disk mounts but does not open-blue screen

    Examine these options:
    http://www.cnet.com/news/installing-os-x-with-a-broken-optical-drive/
    Ciao.

  • How can I install Lion back on my mac, after the hard drive was replaced?

    I had my hard drive replaced, by warranty. Guys in service centre installed 10.6.7 , but as my mac is a new one, and was eligible for free install of Lion. Unfortunately I didn't use time machine, so i don't have a back-up on software (I guess it's included in Time Machine). I have tried to download Lion from the Apple store application - it says - The file got somehow corrupted, and didn't run the installation. I have tried to download t once again - AppleStore app  said it's installed already - And I couldn't download it again. I've decided to reinstall MacOS from DVD's I got with my mac and to try again. Now AppStore offers me to buy it! But it's supposed to be free, just because I had it installed already, isn't it? I wrote an email in Hardware up-to-date program, hope they'll help, but my mac was bought almost half a year ago.. What else can i do? Can somebody give me any advice, please?

    You bought your Mac after Lion came out? Right?
    You then upgrade from snow Leopard (10.6.x) to Lion (10.7.x), correct? How did you do the upgrade the first time?
    You had to logon to the Apple Mac store and use your purchase date and serial number to get the free upgrade the first time. Just do that again.
    Maybe not through the App store? Maybe through Apple Support after logging into your account and viewing your registered products?

  • How do you install os on an imac with a new hard drive

    The hard drive failed on my iMac. I installed a new harddrive - how do I install the OS on the iMac. I never received boot disks.

    I assume  you  bought the machine new and it's a 2012 or later machine. If so then you can use Internet Recovery. If you bought the machine with Snow Leopard or below you received install discs however you probably misplaced them. If that is the case (machine originally shipped with SL or earlier) then call AppleCare and for a nominal fee  your discs can be replaced.If you need to use Internet Recovery then click Internet Recovery for instructions.

  • How can I install an Application on one of my other Hard Drives?

    I would like to know how I can install Applications on one of my other hard drives. I find that when I go to install an Application, the main hard drive shows up allowing me to install it. The other hard drives show as unable to install Application. What am I missing? Thanks.

    A system is what is missing as the installer looks for a valid folder, and may need to install support files in /Library as well.

  • How do I install snow leopard on to a new blank hard drive?

    I just bought a new 1TB Seagate Sata Solid State and properly installed it into my 2006 model Macbook because I was running out of space. But I can't figure out how to get snow leopard back on. I've been researching all day and I've tried partitioning the Snow Leopard installation disc and it wouldn't let and I've also tried using my 500gb external hard drive with the time machine back up but that also won't work. I'm not sure what to do and when I go to disc utility it picks up my new hard drive, so I'm pretty sure it's compatible.

    Is your Snow Leopard installation disk white in color or gray?
    How far did you get:
    Did you get this display? ( After turning on the Macbook and inserting the Snow Leopard Disk)
    Did you click on the 'Install Mac OSX'/
    Did you get this display?
    If you did, click on the 'UTILITIES' button in the lower left hand corner.
    You then should get this display:
    Click on the RESTART button in the lower right hand corner.
    You then should get a menu where you can select DISK UTILITY.  Select it and format the internal SSHD to Mac OS Extended (Journaled) in Disk Utility>Erase.
    Then proceed with the installation.
    In testing on my test MBP, it hung up after the restart, but I have different equipment than you have so I hope you will not experience the same issue.  If you do, let me know and we will try other options.
    Ciao.

  • How to keep using existing Time Machine backup after replacing main hard drive

    The hard drive in my iMac (Lion) is failing. I cloned it to a new drive and installed it in the iMac. Now the system wants to start fresh with a whole new Time Machine backup.
    It seems obvious that there must be a way to keep using the existing Time Machine backup set, but I can't figure out how to do it. Help, please.

    If you had done a full system restore from Time Machine, it would have been done automatically.  But 3rd-party cloning apps don't leave a "trail" so Time Machine can figure out that the new drive has all the old stuff on it.
    Effective with Lion, there is a way to "associate" the new drive with the backups of the old one, but it requires the use of Terminal.  See #B6 in Time Machine - Troubleshooting.  As noted though, this only works on directly-connected backup drives, not backups made over a network.

  • How do I install the operating system Windows 7 on a new hard drive?

    Good morning ¿ how I can install windows 7 home premium on a new hard drive?, Disk damage has my laptop windows 7 home premium 32 bit and I have to buy a new hard drive, but not as I have already installed the new because I do not have installation CD because it is laptop, thanks. My laptop is a satellite L455-S5975 .
    For I CAN NOT get the recovery disks, and I'm not in USA. There will be a way to get it via download?
    My English is not very good, excuse me if I do not understand.

    Satellite L455-S5975 
    I CAN NOT get the recovery disks, and I'm not in USA. There will be a way to get it via download?
    There is no opportunity to download it, Richo. Your best bet is to have an acquaintance in the USA, Latin America, or Canada order the recovery discs and ship them to you.
    -Jerry

  • HT201250 I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I

    I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
    I was already using 10.7. But only had the disc for 10.6.

    Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.

  • How do i install the old software on my mac

    how do i install the old software on my mac, i hate Yosemite

    Please explain me as in what kind of old software do you intend to install on your macbook pro.
    -    Please tell what OS X do you wish to run on your macbook, as you said you hate Yosemite.......??
    -    Do you wish to do a clean install of your favoured OS X and later reinstall your old software...??
    -    Also, do you want to restore the entire system files means the OS X along with the old software or just want to re install your old software on the existing OS X ...??
    Be precise.....

Maybe you are looking for

  • How to show dependency Arrrow in Project Gantt chart ?

    Hi, I have a requirement in which I need to show a Gantt chart showing Project and corresponding task of it. If Say Task2 is dependent on Task1 then I need to show an arrrow between these two tasks showing the dependency direction. But in my prototyp

  • Why is my iPhone 4s still not allowing me to turn on Wi-Fi after ios 6.1.1???

    So downloaded 6.1 and got whole wifi connectivity problem. The 6.1.1 update came and so i gladly updated...still hasn't fixed the problem...restored about 6 times, spent time on phone talking to my provider who couldn't help me either...what now??? A

  • Paramater Criteria not selecting correct data

    Why oh why would disco do this I have a field configured in the EUL to a format mask of "Mon" it shows a truncated date field with Jan, Feb, Mar etc... When I put selection criteria on the field to only display JAN it brings back the columns with Jan

  • Forms Converion through Application Express

    Hi, Is there any way to convert the forms to a web page using "Application Express (apex)" . I have an application Developed in Developer 6i and database oracle 9.2, I want to convert my Existing Application to a web based Application and for this i

  • Unsupported Image Format - Please Help

    Since upgrading Aperture to 1.5 all my RAW images (.CRW & .CR2) from my Canon 300D and 20D, initially show when I click them and then very quickly turn to a maron coloured box with the words 'Unsupported Image Format'. I am really worried about this