How do I install OSX10.5 using an external LaCie DVD Drive?

I purchased a External LaCie Drive recommended by Apple Genius Bar to affordably replace a dead internal DVD drive on an older iMac G4. I bought a family package of Leopard OSX10.5 and installed 10.5 on my main computer (G5) using its internal drive. Trying to install it on my G4 desktop using the external drive, the install program will not boot the G4 holding down the C key during start up. How do you boot up with an external drive so you can download a new system?

Thanks for entering this discussion. I booted with the option key down and it showed the only drive recognized for start up is my main HD even though I had the 10.5 Installation disk in the external DVD player burner.. That was the gist of my problem. My G4 will not recognize the USB External DVD player burner Drive for start up. Once booted up from my HD anything I put on the DVD drive is viewed- a CD, a DVD, an commercial movie, even OSX 10.5 Installation. But when I try to install it, it asks to "restart" but can't restart using a system other than the one on my HD which prevents the installation procedure from ocurring.
The ATA CD/DVD disk drive in my G4 will only play CDs and it is not recognized booting up with option key down when the DVD installation disk is in it. Do you know if Apple supplies OSX 10.5 in CD format? or a system startup I could use in my internal drive on CDs that if booted would allow me to go right to Install. If I could start up on a CD formated system, I think I could then open the installation disk on my external DVD Player and install it.

Similar Messages

Can i use ANY external CD/DVD drive with the NEW mac mini?

We just got the newest Mac Mini and want to get an external drive for importing and burning CD's and DVD's.
Can we use ANY external CD/DVD drive or do we NEED to use the "Apple MacBook Air SuperDrive."
Thanks
Eliot

Maybe.
I've had some situations where a non-Apple DVD drive would not do a particular job. When I tried the same project with the Apple SuperDrive everything worked perfectly.
This is an area where I would not try to save money.
http://store.apple.com/us/product/MC684ZM/A

EMac External LACIE DVD Drive not reading.

eMac External LACIE DVD Drive not reading.
eMac 700 MHz running OS X 4.4
Came without DVD or modem internal
Has 256mb memory
Bought a used Lacie 1394 Firewire DVR External.
Was able to burn DVD’s and CD’s with Toast 6 Light.
Cannot find the “DVD Player” on the hard drive.
It will read data DVD.
eMac will not read any movies burnt or bought.
I was told I probably need more memory?
Thought running IDVD would fix the problem.
No Soap.
This machine was giving external modem problems before Tiger was installed.
Before we spend more money or just get ride of the eMac.
What is the DVD problem?
This same Lacie burner reads and writes DVD and CD fine with our iMac 450 DV 320mb memory. Running 9.2 and X.3

OS X 10.3.x / 10.4.x natively support data burning to external DVD drives but video payback requires software such as iDVD which isn't installed by default on models without an internal DVD drive (the installer sees no internal drive and thinks it's unnecessary). Try downloading VLC Player and see if that will let you play movies.

Installing SL from an external USB DVD drive

Hi, folks.
The DVD drive in my MBP suddenly stopped working awhile back after I updated to 10.5.7 (won't read any disks at all), and I would like to install SL on it using an external Samsung Writemaster TS-H552U with a USB connection (Firewire is not an option with this unit, as the drive casing only offers a USB connection).
Is this possible, and if so, what I need are step by step instructions on how to do this. Any help would be appreciated.
Thanks in advance.

Thanks, Kappy. I'll give that a try, but have one more question before I do:
Do I have to watch out for any reboots during the upgrade? If so, at what point(s) do they occur, and will I need to use the OPTION key again if it does, or does it just do the upgrade in one shot and reboot normally afterwards?
Oh, and I've already installed the latest updates for 10.5.8, and will do a disk and permission repair before I start, just to be on the safe side.
Here's the specs for the Samsung Writemaster TS-H552U:
http://blog.tmcnet.com/blog/tom-keating/gadgets/samsung-writemaster-tsh552u-dvd- burner.asp
Thanks again.
EDIT: Sorry, but I forgot to ask, how long should the upgrade take?
Message was edited by: Maddoktor2

10.0.4 can't read 10.4 install disk from external Lacie DVD drive.

Quicksilver G4, 733.
Only has cd/r built in. Added Lacie d2 external DVD drive. Can read CD disks from this drive, but not the OS 10.4 Install drive. Downloaded drivers from Lacie, in case that would help, but can't open them because DMG images won't mount. (probably because 10.0.4 is too old, again)
Any help is appreciate, except for suggestions to send the DVD in for CDs, which seems very disappointing to me. We have the DVD drive, and it's working. There must be some way to install from this drive in OS 10.0.4, somehow.
Thanks.
G4 733 Quicksilver Mac OS X (10.0.x)
G4 733 Quicksilver Mac OS X (10.0.x)

Thanks very much for the replies. Unfortunately, the Mac in question is a friend's 2 hours away, and bringing another mac along isn't an option. But, the emac cd, as well as a 10.2 powermac cd, both ran the installer / began the installation process without issues while testing on a lower end G4 at work. I am assuming I can use those to install 10.2.
The real issue is the fact that the firewire drive won't boot with the OS 10.4 dvd. I do get a "firewire" symbol on the screen when forcing to boot from the firewire port, but dvd drive light just "flickers", and doesn't read the disk.
I'm not sure if upgrading to 10.2, getting the drive to work by installing drivers, etc, will solve the issue of booting with the 10.4 disk. Wouldn't the 10.4 disk boot even if the operating system currently on the mac is 10.0 (or 8.5..even..). Makes me wonder if this computer is capable of booting from a firewire port. Have found conflicting information on that soo far.
Another option would be to replace the internal with a dvd/combo. And that would be another set of questions (any recomendations of a dvd internal I can pop into this model?).
(733 Quicksilver model).
Thanks again.
G4 733 Quicksilver Mac OS X (10.0.x)
G4 733 Quicksilver Mac OS X (10.0.x)

Can I use an external cd/dvd drive on my iMac?

I have a 5 year old iMac (2GHz Intel Core 2 Duo, 3 GB 667 MHz DDR2 SDRAM) running OSX 10.4.11. We purchased Snow Leopard to upgrade only to find out our cd/dvd drive is broken. It would be about $150 to replace and we're looking to see if we could buy an external drive for any less to get up to speed. We almost never use the disc drive so are hoping to do this in the most economical way possible since we'll also be looking to replace this computer in the next two years or so (or give it over to the kids to play on).
Thanks for any help or insight you can offer!

Here are some from Other World Computing, a well respected company on these forums:
http://eshop.macsales.com/search/cd+burner

Can I install Leopard from an external USB DVD drive?

I am trying to install Leopard onto an older PB G4 whose internal drive is shot. I have an external Pioneer USB 2 drive attached, but when the Leopard Installer prompts me to restart, the installer doesn't kick in and the computer restarts into basic OSX. I've tried to choose the Installer DVD via System Preferences "Start-up Disk" pane, but it doesn't show up. The DVD drive does have its own AC power source.
Any help would be much appreciated! Thanks!

Mac OS X will only boot PowerPCs with Firewire, not with USB. That's the reason it doesn't work.

Using an external optical DVD drive with A665-S6050

I recently purchased a refurbished Satellite A665-S6050; everything about it is nice and working fine. The one and only problem I'm having is trying to transfer (burn) images from a memory card reader directly to an external DVD drive, without having to first transfer images to a new folder on the desktop. Sending the image file directly to the internal optical drive from the memory card reader works fine, no problem, but for some reason the transfer to the external always fails. The process stalls and never completes.
I need to use an external DVD optical drive to save the internal from wear and tear, and potential damage due to excessive usage over time; I burn 20 to 30 discs a day. Cheaper to replace an external drive than the one built into the notebook. Several conversations with tech support failed to get the issue resolved. Finally it was suggested that I send it in for repair, where it is right now. Hopefully I'll get it back soon with the issue fixed.
I'm curious, has anyone come across this issue before? What was done to get it working properly? Thanks for your feedback. I'm planning on getting another Toshiba, and want to know just in case this issue pops up again so I can correct what may be a simple resolution as adjusting a setting.

I have not run into this problem yet however I do know if you use your computers RAM to do this and then x-fer yourimages onto your drive, from thecomputer you are utilizing, that it is much faster.

Install Tiger OS from external FW DVD drive

Because my G4 must be rack-mounted, I have removed it's superdrive to an external FW enclosure. Though it is the original drive, I am unable to startup from it with my full retail Tiger OS 10.4.22 disk.
The disk mounts just fine; running the installer shows a restart button but after the restart, boots from the 10.3.9 system on the HD, with the DVD mounted on the desktop. If I manually designate the Tiger OS on DVD in startup disk, on restart, it reverts to the 10.3.9 system on the HD as well.
I have tried C, X, option keys, These methods don't even show the DVD volume as an option.
What now?
G4 DP 1.42GHz Mac OS X (10.3.9) 2G RAM

Thank you,
Though I have not yet solved the problem, you steered me in the right direction. My enclosure is no longer supported by Yamaha, the original manufacturer, so obviously it is suspect. I am currently waiting for a reply from OWC to see if their most up-to-date enclosures are Tiger boot-compatible before plunking down the cash. I have not been able to locate any database with this information online.
Patchburn reported my drive as ready to go, so I guess the boot issue is not addressed by it specifically.

Problems Installing Win7 using External, USB DVD Drive

I have a mid 2010 15" i7 MBP which I upgraded to from 4GB to 8GB RAM courtesy of OWC. I recently upgraded the 500GB 7200RPM HD with a 240GB OCZ Vertex 3 and using an OWC Data Doubler, I replaced the DVD SuperDrive with the 500GB Hard Drive.
I used an External USB DVD Drive to install OS X SL On the SSD without issues. Also, I got all my updates and software installed and working without any problems.
I've been running great for about 2 weeks now, so I decided to install Windows 7 64bit Ultimate. I ran Boot Camp Assistant and partitioned the 240GB SSD in half 120/120. Everything went fine with creating the partition. I selected to Install from the Win 7 DVD media in the USB DVD drive and rebooted. I got a grey screen. I turned the computer off and turned it back on. Holding down Option, I selected the Install DVD from the Boot Menu. I then got a screen with the Apple Logo flashing intermittently with a Circle/Cross Hatch. So I can't get the Windows Install to start to save my life. I know the External, USB DVD works since I used it to install OS X and I have no problems using it in OS X. I Know the media works because I tried a test install, without activation in a VMWare Fusion VM.
Any suggestions are appreciated?

So here is the answer. The Firmware on the MacBook Pro only supports installation of OS X from External Media and will not install operating systems from 3rd Parties. I tried to install Windows XP, Win7 Ultimate 32 & 64bit, and Ubuntu 11.04 but no success.
Supposedly, the MacBook Air does support installation of 3rd party operating systems from external media, but I have no way to confirm this.
I ended up reinstalling the internal DVD drive installing Win 7 and Ubuntu on the SSD. Using rEFI, I'm able to triple boot all 3 operating systems. Then removed the drive again and reinstalled the 2nd HD. Everything seems to be working fine.
I'm looking for someone who has experience in Mac EFI Hacking to see if there is a way to enable booting 3rd Party OSes from external media. I'm guessing someone could examine the MBA firmware and figure out how to hack that capability into the MBP.

To install Tiger, some Macs need internal DVD drive, or CD version of Tiger

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Some Macs while they have Firewire, don't support Target Disk Mode, nor Firewire booting. These Macs if they came with no DVD drive, and only a CD drive or CD-RW drive (as opposed to combo or superdrive), can only install Tiger (Mac OS X 10.4) if you:
1. Install a compatible internal DVD drive from which supports http://www.patchburn.de/ or other firmware that supports Mac OS X booting.
2. Find the original retail CD version of Mac OS X 10.4 that was available for a limited time called the Media Exchange Program CD.
These Macs include the Blue and White G3 desktop (non-iMac), and the PCI PowerMac G4 described below:
http://docs.info.apple.com/article.html?artnum=58418
The iMac G3 with built-in Firewire, iBook G3 with built-in Firewire, and AGP PowerMac G4 with built-in Firewire at least support Firewire booting and Target Disk Mode which would allow them to use an external optical DVD drive that supports Mac OS X booting.
If they didn't have an internal DVD drive.
Port #4 in this image below is a Firewire port:
Notes: Macs released on or after April 26, 2005 need to install Tiger from the discs that came with them, or a newer retail release except Intel Macs. Retail release of Tiger is a black disc with a white X logo and does not say Upgrade or Update.
Intel Macs could only install Tiger from the discs that came with them.
Macs released on or after October 26, 2007 can't install Tiger.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

What happens if the firmware isn't updated?
The display may stop working, even for OS 9. It is not easy to fix.
I just installed 10.2 on one of them and it seems to be working. Should I uninstall it and upgrade the firmware and start over?
Check the "Boot ROM version" with System profiler. If the firmware is updated it will be 4.1.9
It is not necessary to remove OSX to install the updates if OS 9 is still on the hard drive. If not, and the OS 9 drivers are there, OS 9 can be installed without affecting OSX.
The update won't install if it is not needed.

Is there any way to hook up the iPad 2 to an external CD/DVD drive?

I want to get my girlfriend an iPad for college, but her textbooks frequently come with CD's with supplemental learning resources. She also enjoys watching DVD's. Unfortunately, the iPad lacks a USB port, so it can't be connected to an external CD/DVD drive. Is there any workaround, such as a USB adapter that can be used with the existing iPad interface? Or is there some sort of wireless solution to be able to use an external CD/DVD drive? Knowledgeable feedback is appreciated, and please don't suggest buying a laptop, as I have already considered that. My inquiry refers strictly to my query regarding hooking up an external CD/DVD drive to the iPad 2. Thanks in advance!
Lou

louven23 wrote:
please don't suggest buying a laptop, as I have already considered that.
Ok - then since the answer to your question is NO - then you have all of ....
Knowledgeable feedback
that there is on the subject. There is no way to connect any device to the iPad except for a camera using the camera connection kit.

How do I install windows using BootCamp without cd drive fot the new MBP?

I need some softwares for my work (modelsim, altera, ltspices etc) but some of them only supports windows.
New MBP doesnt seem to have a cd driver.
How do I install windows using bootcamp without cd drivers?

You can use a USB thumbdrive to do this, assuming you have access to a windows machine to format the usb stick.
I installed Win7 on my MB Air (2011), which of course lacks a DVD drive altogether, using this technique.
Basically, you download a tool called rEFIt to your macbook. ( http://sourceforge.net/projects/refit/files/rEFIt/0.14/rEFIt-0.14.dmg/download ) When this is installed, it gives you a boot selector menu when you boot the Macbook ('Do you want to boot to MacOS or to the USB drive?')
Then you download and run an Apple tool called Boot Camp Assistant, which allows you to partition your HD for the two operating systems to share; it also pulls down all the windows drivers you need.
Then prep the USB thumbdrive on a windows machine to be a Win7 installer disk. You'll want a drive in the 4gb+ range I think. You have to set up the thumbdrive to be bootable (lots of tools for that available), and then copy all the windows installation files over to it.
Put the thumbdrive in the macbook and boot holding down the option key.
Choose the rEFIt icon on boot, then choose to boot from the thumbdrive, then format your new windows partition to something Win7 can handle, and install windows.
On my machine I followed a slightly more involved process and wiped out MacOS entirely. I would have kept it on a small partition if I'd had a bigger hard drive.
If you need super detailed instructions, CNET has some here:
http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/
Tech-Recipes has some similar instructions here:
http://www.tech-recipes.com/rx/9136/macbook-air-install-windows-7-with-boot-camp -without-an-external-dvd-drive/
If you have any issues after trying this, ping me and I may have solved them when I went through the same process.

How can I install or use Microsoft Office on my iPad 4?

How can I install or use Microsoft Office on my iPad 4?

You cannot. Microsoft has not made a version of Office for iOS. There are however a number of apps that are compatible with Office documents. Apple makes iOS versions of their own iWork apps (Pages, Keynote, Numbers) that are available free if you purchase a new iOS device and that can be purchased separately for older devices. There are also 3rd party combined suites that cost less than the separate Apple apps. Ones often recommended include Documents 2 Go, Quickoffice and Office2 HD.
If you can accept needing a network connection whenever you want to use the apps and have an Office 365 subscription, Microsoft has just released their Office Mobile app, though it has significant limitations. Or a server-based solution such as CloudOn might be an option for you.
Regards.

I want to buy photoshop creative cloud for teams, how users can install and use it?

i want to buy photoshop creative cloud for teams, how users can install and use it?

Cancel old and buy new is the only way I know, but you MAY be able to exchange
Return, cancel, or exchange an Adobe order

How do I install OSX10.5 using an external LaCie DVD Drive?

Similar Messages

Maybe you are looking for