How do I install PFB fonts when using Windows 7 64bit?

I got a new 64 bit computer with Windows 7. But when I copied the fonts I was using on the old computer the PFB fonts do not work any longer.
The old ATMF program does not work on this computer so how do I now install the PFB fonts?
//Anni

Hopefully you did not try to install the old Adobe Type Manager software. If you did, you may need to totally reload Windows if you cannot restore your system to its state prior to attempting to install that software!
Assuming that you didn't make that fatal mistake, the method for installing Type 1 fonts, each of which consists of a .pfb and a .pfm file is as follows:
(1)     Copy the .pfb and the .pfm files to a single directory if they are not already so available.
(2)     Select the .pfm files for the fonts you wish to install.
(3)     Right-click and select Install which will then proceed to install the fonts onto your system copying both the .pfb and the .pfm files to the C:\Windows\Fonts directory. Do not drag-and-drop these files! Alternatively, if you don't want the font files themselves resident in the C:\Windows\Fonts directory, when you right-click the files, select Install as shortcut. This installs the font but references it from its current location.
          - Dov

Similar Messages

Fire fox locks up and is real slow when using windows 7 64bit

I am using windows 7, 64bit
when you click on a "go to link" phrase/word the program either locks up or takes a real long time to to go to the link site.
program loads real slow (it take 3 to 4 times longer than in windows xp.
I am using fire fox 4.0.1, this problem is the same with earlier versions as well

I have followed the troubleshooting solutions, reset, no add-ons etc.. even full uninstall & reinstall. Nothing has worked to resolve the issue.
FF hangs with Not Responding is frequent, while this is hung, it locks up my entire PC and I cannot do anything including opening Task Manager.
My Workstation Specs:
OS: Microsoft Windows 8 Pro 64-bit
CPU: AMD FX-8350 Vishera 32nm Technology
RAM: 32.0GB Dual-Channel DDR3 @ 669MHz (9-9-9-24)
MB: ASUSTeK COMPUTER INC. M5A99X EVO R2.0 (Socket 942)
Graphics: 47LV4400 (1920x1080@60Hz) 2048MB GeForce GTX 660 (ASUStek Computer Inc)
HDD: 224GB TOSHIBA MKNSSDCR240GB ATA Device (SSD)
699GB Seagate ST750LX003-1AC154 ATA Device (SATA)
BluRay: PIONEER BD-RW BDR-208D ATA Device
Audio: Realtek High Definition Audio

How to open document from mac when using windows without transferring the file?

How can i open a document from mac when i am using windows without transferring it?

depend on the document program more then anything else really
when ever I open a doc with word it make a history for undo and redo action file in the same dir
with bootcamp you only have read not write access to the osx partition so it would fail to be able to create that file
but if you can get word or whatever program you use to open the file not to place a temp file in the same dir
or use a program which did not make any type of temp file or used a program where the temp file would be located elsewhere where you decide it would work file

How can i run wireless internet when using windows xp on my imac?

I recently installed Windows XP on my imac using Boot Camp, everything works great except the internet. ive been looking but i have found no way to get the internet to work via my wireless connection, or is it just not possible?
Could it be that i am missing some drivers? Anyone know where i can get them?
Sorry if im asking too much stuff.
Thanks in advance

Depending on the wireless base station brand and specifications,
you may have to set up the Windows system to find & use it...
Just about the same as setting up any Windows PC to go online;
except, if you have an Apple base station...
If you have an AirPort base station, there are updates for Windows
to help use that access point, from your Mac, running Windows.
An example, but not necessarily the correct answer, in the following:
• AirPort Utility 5.4.2 for Windows
http://support.apple.com/kb/DL840
Since you have posted this request in 10.5 Leopard> Automator
discussion, this won't be a suitable place to find matching replies.
see: Windows compatible technologies> Airport for Windows:
http://discussions.apple.com/forum.jspa?forumID=1014
There are other topic discussions under the Windows area,
so if you look into the main Discussions page and look into
the bottom of the listings, you can see the larger group there.
Apple Support Discussions - Forum Home:
http://discussions.apple.com/index.jspa?categoryID=1
Perhaps after reading through topics in the Windows> Airport
thread, you may wish to reconstruct and repost it in that area.
Good luck & happy computing!
{ edited to add Airport Utility info & misc explanation }

How to get 2 finger scrolling when using windows on mac?

I just recentley put windows on my mac and i have installed all of the drivers for it to run but im having trouble with a few things like the f keys wont work for brightness or keyboard brightness and the other thing that wont qork is the 2 fingered scrolling then the volume buttons.

In Windows there is a task bar located in the lower right of your desktop. There is a Bootcamp icon there, if you installed Bootcamp in Windows. Click on the icon and open the Bootcamp control panel. Select the keyboard and trackpad tab then set up your two finger scrolling etc.

I'm not able to see all the tabs words on itunes window. I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?

I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?
I'm using Win Vista 64b - but I try already to install all my fot library but nothing happen,, still not able to see some menu's from lists, tabs titles, etc.
I search through itune's web site and not sign of info about how can I fix this problem...
help!

It has something to do with Segoe fonts in your system.
Refer this link for solution
iTunes 10.1 Missing Text

How To Install Urdu Fonts and Use in Form

How to work with urdu fonts and use in form ...

Do you have a problem with it or are you looking for a guide?
If the latter is the case you should probably take a look at Note 314074.1. It talks about character sets in Forms. You can use UTF-8 in Forms and in the database. I assume urdu characters are in utf-8?
There was a problem with urdu in win2k some time back. Is that what you are using?

How do I install InDesign CC when the app overview says "up to date" even though I haven´t installed anything yet?

How do I install InDesign CC when the app overview says "up to date" even though I haven´t installed anything yet?

It sounds like maybe you installed a trial at some point in the past and trashed the application folder rather than doing an uninstall?
Have you tried the cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

How do I install recommended updates, when I click on adobe flash plugin update now buttons, I hit a dead end on oracle's website, how do I complete the update?

How do I install recommended updates, when I click on adobe flash plugin update now buttons, I hit a dead end on oracle's website, how do I complete the update?

First, grab the Adobe uninstaller from here:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
Then download Flash 10.3.183.90 from here - about halfway down the page:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
(Released 6/11/2013) Flash Player 10.3.183.90 (61.1 MB)
IMO, the best version of Flash for WinXP. Adobe kept up with security updates for 10.3 for WinXP users long after Flash 11.0 came out in 2011 for Vista and newer versions of Windows.
Run the uninstaller, then reboot your operating system.
Then you can run the Flash installer, with Firefox closed, of course.
''Note, if you still use IE you'll need to reinstall the ActiveX version of Flash for IE. That uninstaller removes all versions of Flash that might be installed,''

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one?

Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
This is the biggest question, where I mainly want a conclusive answer: How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one of them, using the same photos for editing. I won't use DNG. Details: I mainly use my older MacBook Pro, but would like to be able to use my PC as it's way better (Specs: i5 2500K, 16GB RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HDs that I could use, one for Backup and one for the actual Photos/Edits. I'll probably need to use it as my internal HDs are quite full, and I can't just delete stuff or move it to an (Developer programs, Lossless music, etc.).
Based on this, how do I back up the whole thing e.g. Photos folder (all photos and edits, and preferably presets too)?

I believe it should be possible to work cross-platform without having to relink files each time, or without having to keep exporting/importing the catalog, by keeping the single catalog and the image library on the one external drive which is then switched between systems as needed.
Obvious first requirement is an external drive that is formatted in such a way (e.g FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalog AND the images parent folder are both established at the same level in one overall parent folder, then it should be possible to take advatage of Lightroom's ability to use relative paths rather than absolute paths to detect the images, no matter if the drive is named (Mac) or lettered (PC). This is how "export as Catalog" works, i.e. it creates a "package", aka a parent folder, containing the catalog and a replica of the exported images folder hierarchy alongside the catalog. Take that "package" to another system (same OS or not) and "it just works" even if the drive letter is different or the OS is different....because the relative path from catalog to images is still the same.
I haven't tested this cross-platform (though I have between different PC systems with different drive letters) so for me it's still just a theory, but there may be others who have done this successfully.

How do I install the font ITC Bailey Sans in Adobe CS4 on a PC?

How do I install the font ITC Bailey Sans in Adobe CS4 on a PC? I was given the font files on a CD but the file type for each font is not recognized. Any insight would be greatly appreciated. Thanks.

Windows Start menu --> Settings --> Control Panel --> Fonts, then File --> Add Font.
Mylenium

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

How do I close a JInternalFrame when using subclasses and a separate cla...

The heading should be: How do I close a JInternalFrame when using subclasses and a separate class for the actionListener?
I have just created a JInternalFrame appclication and now I want to structure up my code. I have a Superclass that contains the usual settings for the two JInternalFrame:s, and the two subclasses with frame specific information. Both the JInternalFrames use the same OK button. I want to have the actionListener outside the classes to avoid repetition of code. But the dispose()-function does not work properly, it does not close the opened JInternalFrame. What�s wrong?
class Superclass extends JFrame
     JButton b= new JButton("ok");
     Superclass()
class Subclass1 extends Superclass
     Subclass1 ()
          add(ok);
       ok.addActionListener(new Listener());
class Subclass2 extends Superclass
     Subclass2 ()
          add(ok);
       ok.addActionListener(new Listener());
class Listener extends Superclass implements ActionListener
     public void actionPerformed(ActionEvent e)
               dispose();
}How do I controll in the Listener class that the button in Subclass1 is beeing pressed?

First of all I think I misunderstood your question. You said you had two internal frames, so I thought you wanted to close the internal frame.
It now looks to me like you want to close the entire JFrame, which makes the code even a little easier. Something like:
JComponent component = (JComponent)event.getSource();
JFrame frame = (JFrame)SwingUtilities.windowForComponent( component );
frame.dispose();
Ok, I will make a try:
public static Container getAncestorOfClass(Class c, Component comp)
w.getAncestorOfClass(w, this); Fiirst you need to learn the basics of reading the API.
"getAncestorOfClass()" is a static method. That means you don't use a variable to invoke the method. You use the class itself.
"w" is a variable, which is a JFrame, but that is not what the first parameter should be. The first parameter is a "Class".
"this" will refer to your Listener class, but you need the Component that generated the ActionEvent.
When I thought you wanted to close an internal frame then the code would have been something like:
JComponent component = (JComponent)event.getSource();
Container container = SwingUtilities.getAncesterOfClass( JInternalFrame.class, component );
JInternalFrame internalFrame = (JInternalFrame)container;
internalFrame.invokeSomeMethodHere();If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)", that demonstrates the incorrect behaviour.
http://homepage1.nifty.com/algafield/sscce.html

How do I stop system sounds when using AirPlay on my MacBook Pro?

Hi all,
Probably a quick question, but I'm fairly new to Macs. I've a Macbook Pro 13 Late 2011 and now I've got an Apple TV, I use AirPlay. But how do I stop system sounds when using AirPlay?
Many thanks in advance, Jon.

Open AirPort Utility located in HD > Applications > Utilities
From the AirPort Utility menu bar click AirPort Utility > Preferences
Deselect: Monitor AirPort base stations for problems

How do I install PFB fonts when using Windows 7 64bit?

Similar Messages

Maybe you are looking for