How do I install PS from CS 4 discs?

Ok, this may be the dumbest question of the day.
I have student version of CS 4 with three discs - App 2, Content and Learning.
I put each of the first two in the CD drive and it spins but no install message.
I look at the top files: AUTORUN & an icon but they do not execute.
I go down into the follders below and I find an install PS program.
When I execute it, it says I need to use Setup.exe.
I search the disc for setup.exe and there is none.
So, how do I install PS from CS 4 discs?
Thanks,
Frank

Frank,
Are you inserting the first disc?
Can you click on AutoRun and launch that manually?
Are there any executables in the root folder? If not, look in the Language folders, say US En, or whatever you are going to want to install as.
If you still cannot find any executable, can you post a screen-cap of your #1 Disc open in Windows Explorer/My Computer?
Also, this is a general CHECKLIST for installing most Adobe programs.
Good luck,
Hunt

Similar Messages

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

Hello everyone! i have a new macbook pro and i want to download aperture. my app store says it is already installed (on my old macbook pro). how do i install aperture from the app store in this instance please?

hello everyone! i have a new macbook pro and i want to download aperture. my app store says it is already installed (on my old macbook pro). how do i install aperture from the app store in this instance please?

Are yoy sure that Apeture is not in the Applications folder of the new system? If it is move it to the trash and the App Store will let you download Aperture from it.
You will need to make sure you use the same Apple ID you used to purchase it in the past.
regards

How do I install Pages from iWorks on my iMac onto the iPad?

How do I install Pages from iWork on my iMac onto my iPad?

You don't. The Mac version of Pages works on Macs - not on iPad.
You need to buy the iPad version of Pages from the AppStore, and install that on your iPad:
http://itunes.apple.com/gb/app/pages/id361309726?mt=8

How do I install software from cd-rom onto my IdeaPad S10?

I just received my IdeaPad S10. How do I install software from a cd-rom onto it? I tried putting my cd-rom in my regular laptop and copying it onto a flash drive and then copying it to the IdeaPad. The installation starts, then I get a message that installation has stopped because the installation has been corrupted. Any easy ways to install software?

Here's what you can do.
Download virtual Clone drive (freeware) from here http://www.slysoft.com/en/download.html install it on your S10.
Now on your destop, make a backup ISO of your software CD or DVD.
I use this http://isorecorder.alexfeinman.com/isorecorder.htm it integrates with explorer on the right click menu. There are other solutions also.
Once your ISO is created you can copy it to your S10 via network, usb key, etc, and mount it as a drive letter with Virtual CLone drive.
Hope that helps.

How do you install programs from a disc onto the new Mac Book Pro?

Can anyone say how do you install software from a disc/dvd onto the new Retina display Mac Book Pro?

Maybe also this:
DVD or CD sharing: Using Remote Disc

How do I install CS5 from CDs into my new MacBook Pro?

How do I install CS5 from CDs into my new MacBook Pro?

Buy a cheap external DVD drive, connect via USB and then install
Download CS5 Trial version from http://prodesigntools.com/all-adobe-cs5-direct-download-links.html then activate with your CS5 serial number to convert to a permanent version

Hi, I just purchased a Creative Cloud plan. When I open the Creative cloud, there is nothing there. How do I install apps from creative cloud?

Hi, I just purchased a Creative Cloud plan. When I open the Creative cloud, there is nothing there. How do I install apps from creative cloud?

Hi la dama cooks,
I believe you are getting the blank Creative cloud applications.
Please refer to the threads below where the issue has been resolved:
Win: New Creative Cloud App unusable: it's blank!
Mac: Cloud Desktop App is blank?
Regards,
Sheena

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?

Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd.

Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?

Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?

Hi Barbara,
Try Pacifist...
http://www.charlessoft.com/
then extract/install what you need from your Install Disc.

How do I delete items from my startup disc?

How do I delete items from my startup disc? I keep getting a message saying my startup disc is full

That is your internal hard drive...look at your content in places like pictures, documents and other folders where you keep things. Get an external hard drive and move videos, music, photos to the external and then delete by dragging to the trash, empty the trash and then restart the MacBook Pro.

How do I install things from the internet?

Hello,
I realise I'm posting twice and I'm sorry, but I realised I had another question. How do I download ANYTHING from the internet? With AIM I could just use iChat. But I'm wanting to download some other stuff...but when I click on the icon to install it on my desktop, Microsoft Excel pops open and it won't install. Please Help!
Thanks,
Sophie
iBook G4 Mac OS X (10.4)

Hello Sophie,
You need Stuffit Expander to expand compressed files so they can be opened.
John

HT1549 How do I install software from a cd in remote computer on the network.

I have a new software program(on CD/dvd) I want to install on my new mac. My old mac has a cd/dvd drive. How do I install the program on my new computer from my

DVD or CD sharing: Using Remote Disc

How do I install updates from another computer?

Got a macbook, and a windows.
How do I install updates for my macbook (software update.app updates) from my windows computer? Can i somehow download.. example, if i have snow leopard 10.6.1, can i then download an update on windows that updates my mac to 10.6.8?

Okay, cool. Is it always "Combo updater" or "Update Combined" that i should download?
I downloaded one of the 10.6.8 updates from apple.com, and it said that i needed 10.6.7 before i installed 10.6.8.
But I got paritioned HD's, one lion and one snow leopard, When lion 10.7.1 or 10.7.2 comes out, can I then download the updates on windows and transfer that update to mac and update just cool?
And how do i stay up-to-date with this?
And other software updates, such as fixes in the trackpad, and such random stuff (not itunes, mail, automator, etc updates, only Main OS updates..) How do i stay up to date with that?

How to hide installed application from Software Center 2012

Hello,
I would like to ask you whether it is possible in Software Center 2012 to remove the record of program that was installed successfully from application catalog.
Currently it stays visible in SC as "Available" constantly informing users with popup that there is new software available for installation. This may be disturbing behavior for users.
Technical specialist in our company would be very glad to know some workaround. Is there some xml file or registry on user computer that could be used to remove such record from Software Center 2012?
Thank you very much for any advice!

Hi,
There is a related setting in Client Setting - Show notifications for new deployments.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I install PS from CS 4 discs?

Similar Messages

Maybe you are looking for