How do I install Rockbox on the SanDisk Sansa Clip Zip?

Hello:
I am new to the SanDisk Forums!
I have the SanDisk Sansa Clip Zip player and the version is V01.01.18A. How do I install Rockbox on it? Thank you,

Set the USB mode on the player to MSC(settings, system settings, >MSC). Connect the player to the pc.Go to rockbox.org, and download the manual for the Clip Zip. Look at the themes for the Clip Zip, and decide which you want to use. On the Rockbox home page, click on release, and download and follow the instructions for automatic install of Rockbox 3.13 When it asks for mountpoint, you need to select which drive letter the pc has assigned to the player.

Similar Messages

SanDisk Sansa Clip Zip Won't Turn On and Isn't Recognized by Computer

Hi, Newbie here with my first question. I've had my Clip Zip for four years and it recently ran out of juice while listening to a song. I plugged it into my car charger for a recharge, but the device would did not turn on as usual, nor was it detected by my PC when I got to work. Here is what I have tried so far: 1) Plugging it into other PCs (five of 'em).2) Holding the power button down for 20 seconds to reset it. (while disconnected from PC).3) Holding the power button down for over one minute to reset it.4) Holding down the power button and the center button at the same time for 20 seconds. When that didn't work, I tried again, this time for over a minute. Then I tried holding down the power button, then the center button a second afterwards, again as above.5) Holding down the power button and the return button at the same time, as 4.6) Trying to put it into MSC mode.7) Checking the device drivers via Device Manager, but it still wasn't detected by my PC. (I followed the intructions in this article for 6. and 7.: http://hubpages.com/hub/Troubleshooting-SanDisk-Sansa-Clip-Zip-MP3-Player-Problems) Thinking it was perhaps a faulty USB cable, I bought a new one. Still won't turn on. Tried everything as above - again. Still won't turn on. Tried this suggestion from another forumite: Koto SanDisk UserPosts: 63Registered: ‎03-21-2012 0 Re: froze and now it won't turn on[ Edited ] Options ‎05-01-2012 03:33 PM - edited ‎05-01-2012 03:36 PM Hold the Power Button over 20 Seconds. Leave the Power Button and press Again!. This Reset the Player. The leave and Again is important. Have the Player Akku Power?Plug the Player 30 Minutes on the PC to load and repeat Reset Method. But it still won't turn or be recognized! Does anyone have any suggestions, or is it kaputski? Four years seems a depressingly short shelf life for an MP3 player. Thanks, Mino

Mino wrote:
Thanks for the reply.
As I'm not keen on spending more money on a device that may no longer work again, can I assume that I could try the same thing but just keep it plugged into my PC?
Sure, this is just a measure that some people sometimes have found success with. With your PC, just make sure that the PC is on or that the USB port is still providing power/charging when the PC is off.

TS1424 How do I play itunes on a sanDisk sansa clip plus mp3 player?

How can I move playlist to the windows media player and send to mp3 mobile player?

Set the USB mode on the player to MSC(settings, system settings, >MSC). Connect the player to the pc.Go to rockbox.org, and download the manual for the Clip Zip. Look at the themes for the Clip Zip, and decide which you want to use. On the Rockbox home page, click on release, and download and follow the instructions for automatic install of Rockbox 3.13 When it asks for mountpoint, you need to select which drive letter the pc has assigned to the player.

How do I install Leopard on the partition I've created on my MacBook Pro running Lion?

I've partitioned my hard drive (running Lion) so that I can run Leopard. How do I install Leopard on the partition? I've put in the Leopard CD and restarted, but all I get is a black screen with a bunch of gibberish.

There's no way the MacBookPro will boot to Leopard.
Snow Leopard may be possible, but you'd need the original discs from Apple customer Service - the retail disc isn't a high enough version.
To check viability of Snow Leopard, have a look at a.brody's article;
https://discussions.apple.com/docs/DOC-2455
If it looks like SL is feasible ring the Apple Customer Services with the model and serial no. and see if the original SL discs are available.

How do I install memory into the Pavilion 17z-F2 series laptops?

How do I install memory into the Pavilion 17z-F (17z-F200, product L2H13AV) series laptops?
HP appears to have no maintenance guide available for this model series. What's up with that?
Please, do not offer the generic (and out-of-date) Pavilion 17 Notebook PC Maintenance and Service Guide. It does not appear to apply to the 17z-F series. This guide instructs to remove the bottom service panel which I could have figured that out on my own. However, the 17z-F series does not appear to have any removable panels at all. I took an up-close look at the Pavilion 17z-F100. And, it does not have any removable panels on the underside, except for the battery. So, I presume the 17z-F200 to be the same.
I am a computer technician. And, this is the first laptop I have seen without any service panels. I am probably going to have to disassemble the entire outer-shell to install memory (or to replace the hard disk drive once the time comes). But, every laptop I have worked on in the past had its own special array of hidden screws or special tricks for disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
This question was solved.
View Solution.

How about this one:
Pavilion 17z Manual
Don't get me started on this. It's one of my pet peeves, too. HP is not the only one doing this. Acer and Toshiba, etc. also are selling "closed" systems now. I hate it. I will absolutely never knowingly buy one but I am spending a lot of time here answering questions just like this. Good luck and let us know how you do. Sounds like you will be fine.
If this is "the Answer" please click "Accept as Solution" to help others find it.

HT201304 How do I install apps without the app store

How do I install apps without the app store

This is an issue not to be taken lightly. I just upgraded to Mavericks. My two favorite amateur radio apps will not launch because they did not come from the App Store. There must be a way to make them work. Come on, let's have it. Ohh, the apps: DVTool for DStar Radio operation, and echomac for amateur radio repeater connection from a Mac. These are essential amateur radio applications used in emergency radio communications ... ARES.

Hello everyone! i have a new macbook pro and i want to download aperture. my app store says it is already installed (on my old macbook pro). how do i install aperture from the app store in this instance please?

hello everyone! i have a new macbook pro and i want to download aperture. my app store says it is already installed (on my old macbook pro). how do i install aperture from the app store in this instance please?

Are yoy sure that Apeture is not in the Applications folder of the new system? If it is move it to the trash and the App Store will let you download Aperture from it.
You will need to make sure you use the same Apple ID you used to purchase it in the past.
regards

How do you install logic on the new imac if there is no disk drive?

How do you install logic on the new imac if there is no disk drive?

Dj Generator wrote:
[There] must be other options, i would rather not spend £70 on a disk drive or £140 on the software again??
Hmmm? A quick google search for external optical readers turns up many in the $20-$40 (USD) range. Didn't convert to £ or include any VAT charges, but you should be able to get something significantly cheaper than £70. That's your simplest solution.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

How do I install memory into the Pavilion 17z-F200 (part L2H13AV)

How do I install memory into the Pavilion 17z-F200 (part L2H13AV)?
HP appears to have no maintenance guide available for this model. What's up with that?
I took a look at the Pavilion 17z-F100 (sent by mistake). It does not have any removable panels on the underside. And, the User Guide for the 17z-F200 indicates that it will be the same (assuming it ever arrives).
I am probably going to have to disassemble the entire outer-shell to install memory (or replace the hard disk drive, once the time comes). But, every laptop I have worked on in the past has had its own special place for hidden screws or special trick to disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
This question was solved.
View Solution.

@DLBurkhart ,
Hello and thank you for posting on the HP support forums. Here is a link to the HP Pavilion 17 notebook Maintenance and service guide.
HP Pavilion 17 Notebook PC Maintenance and Service Guide
In the guide you will find the instructions on how to access the memory module and as well you should find the supported memory configurations.
I hope this was helpful.
Thank you for posting and have a great day
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

I want to install my original SnowLeopard (from the installation disc) to a partition I created in the now upgraded Mavericks OSX, How can I install it on the new partition?

I want to install my original SnowLeopard (from the installation disc) to a partition I created in the now upgraded Mavericks OSX, How can I install it on the new partition?

That's easy.
2 methods:
1. Change the Startup Disk in System Preferences, then restart:
2. Hold down the "Option" key while starting or restarting the Mac. Then chosse the partition that you want to startup from.
The 1st mehtod is the quickest, because you don't have the additional step of choosing the drive. Plus, whatever you have selected in System Preferences becomes the default startup drive.

How can I install Itunes in the data drive and not in OS partition?

My PC has a 3 partitions and I hace installed Itunes in the OS partition, very small. How can I install Itunes in the data drive?

See Williams Lloyd's post > https://discussions.apple.com/message/15670671#15670671

I own two i macs. I bought and installed Lion on one computer. How can I install Lion on the other computer without additional charge?

I own two I macs. I bought and installed Lion on one computer. How can I install Lion on the other compute without additional charge?

If it's the same email address Apple registration on both, use the 2nd computer and go to the App Store and find Lion. If different, use the second computer but log in to the App store with the address you used on the first go round. The buy button should instead say install. Then go through the same process again.

How do I install things from the internet?

Hello,
I realise I'm posting twice and I'm sorry, but I realised I had another question. How do I download ANYTHING from the internet? With AIM I could just use iChat. But I'm wanting to download some other stuff...but when I click on the icon to install it on my desktop, Microsoft Excel pops open and it won't install. Please Help!
Thanks,
Sophie
iBook G4 Mac OS X (10.4)

Hello Sophie,
You need Stuffit Expander to expand compressed files so they can be opened.
John

How do I install WordPress in the new Lion Server X?

How do I install WordPress within Lion Server? I have the Mountain Lion running plus the Lion Server X 2.0. Please advise. Thanks in advance.

Unfortunately that site doesn't cover half the issues.
For one its install location might not make the most sense - ~/Sites are useful for personal web sites, but probably not the best option for WordPress (even if this is going to be your own personal blog).
Part of this depends on how the site is expected to be used, so it might be OK, but that does need clarifying first.
Second, even though it's what the OP asked for installing WordPress is a small part of getting WordPress working. WordPress is a performance dog and to get any sense of acceptable performance you're going to need a cache server (typically memcached). You'll likely also need various PHP modules depending on what WordPress modules/features you want to use. For example, do you want to upload images to your blog? Well you'll need GD. What about some of the performance plugins that do things like minifying javascript and CSS. They'll need various things including memcached (so that the minified versions can be cached and not regenerated for every page view).
Oh, and then you'll have to consider security. WordPress has almost zero concept of security (seriously, it still assumes/requires FTP access to your site for updates).
So, at the risk of repeating myself, it's relatively easy to install WordPress. Getting it working well is another chapter (entire book?) all in itself.

How can I install gpg on the thunderbird portable on mac

I have mac and portable thunderbird. I'm using the pgp so my all emails are in encrypted format. how can i install gpg or pgp on my portable thunderbird with my existing keys

Same answer as your other post. Please go to the Portable Apps website for support for this version. It is not supported here.

How do I install Rockbox on the SanDisk Sansa Clip Zip?

Similar Messages

Maybe you are looking for