How do I install SATA driver?

I've got a Raptor and I'm running it in a K8N Neo Platinum. I've also got a Sony DVD recorder.
Which SATA do I hook the drive to and which IDE do I hook the recorder to?
Also, how do I install the SATA driver? I don't want to use RAID so do I still need to intall a SATA driver?
I ran into a problem when I was installing Windows XP and it said it couldn't load the device driver for my diskdrive and CD ROm Drive. I'm not sure why but I thought it might have something to do with SATA.
Thank you,

Oh man it's been a long 24 hours!  The reason I'm just getting back is because I removed my IDE HDD from this PC and installed it in my new K8N Neo. Well, it wasn't the SATA HDD causing the problem. I then removed my PS from this computer and installed it in the new one. Well, it wasn't the PS. Then I swapped my new PC3500 Mushkin Enhanced Memory 1GB (2x512) for my 1GB of Corsair XMS PC3200 in my old PC. Well, XP installed without a problem. It was my DAMN RAM. I guess it's bad or the Neo just doesn't like it. Anyway, I finally got this computer (old) back up and running so I could post.
I put the Mushkin back in the Neo PC and tried to install XP again with just one stick at a time. It still wouldn't let me. I then lowered the speed of the memory down to 166Mhz from 200Mhz with one stick and XP loaded without a problem.
So what do you guys think? Is my memory bad or does this board just not like Mushkin PC3500?
Will I get hit will a restock fee from newegg when I return this memory and what memory should I get to replace it?

Similar Messages

  • How do I install ipad2 driver on my computer

    How do I install ipad2 driver on my computer?

    There is no driver to install.  What you need to have on your computer to set up and maintain your iPad 2 is the most recent version of iTunes, which is a free download from Apple.   From this site, click on iTunes and download it......

  • How do I install a driver on my macbook pro

    How do I install a driver on my macbook pro

    ECastrillo,
    it depends upon the driver. Which driver are you trying to install?

  • How can i install jdbc driver

    Hi
    i install websphere 5 and try to connect to my sql server but cannot find jdbc driver class path and can not find any jdbc driver
    pls tell me how can i install jdbc driver in my websphere
    with regards

    You may get a better response posting this question in a WebSphere specific forum. Maybe this will help, the following link shows the command you need to execute to install a JDBC driver in websphere 5.0.
    http://publib.boulder.ibm.com/infocenter/wasinfo/index.jsp?tab=search&searchWord=mysql+driver&maxHits=50

  • Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    The wacom site will have the drivers for you.
    http://us.wacom.com/en/support/drivers

  • HT1338 How do I install a driver for the speakers I have connected to the headphone jack?

    How do you install a driver for speakers I have connected to the headphone jack?

    You don't need drivers for speakers in a headphone jack.
    What is the problem?

  • How do you install a driver onto a current system from a live cd?

    I just installed Arch on my laptop, but it seems that it doesn't install the Ethernet drivers and they don't appear to be on the live CD.  How might I install the drivers?
    Thanks!

    Yes wrote:How do you install a driver onto a current system from a live cd?
    Yes wrote:
    I just installed Arch on my laptop, but it seems that it doesn't install the Ethernet drivers and they don't appear to be on the live CD.  How might I install the drivers?
    Thanks!
    your post title and the message within seem to contradict themselves.
    More information from you might be helpful as in  what packages did you install during the installation process? Did you have network connection during the install? Are there any errors that you get when booting.
    Last edited by Inxsible (2010-06-16 23:50:34)

  • HT204382 How do I install Flash drive onto my mac

    How do I install flash drive onto my mac

    Not at all sure what you are wanting to do - what type of Mac? Which OS version? Are you physically trying to install another drive?
    Or are you talking about the Mac not recognizing flash drive that you've plugged in?

  • Install sata drive

    have a 865pe neo2 and would like to install an sata drive  and copy xp from current hard drive to sata drive. can I just install sata drive to sata controller? what to do?
                                                                                                                Thanks
                                                                                                                 JOHN

    Quote from: NovJoe on 12-August-07, 11:39:50
    Yes, you can install a SATA drive in but you must do the following settings:
    ATA On Chip Config: Native
    ATA Mode: SATA Only
    PATA Keep Enabled: Yes
    PATA Channel Selection: No
    Set SATA as RAID: No
    The rest at defaults.
    Next, you can't copy and paste windows from drive to drive as there'll be alot of i386 and winnt/system32 files being locked, thus unable to be copied over.
    not looking to copy &paste but will use software that comes with sata drive or some other program to copy win xp to sata drive. will that work?

  • How do i install sata hard drive?

    ok, i am using right now my sony dvdrw on ide1 as master and ata hard drive on ide2 as master, booting to the hard drive. i am going to install an sata hard drive and use that as the boot drive, the normal ata as a storage drive only. how will i install the sata drive? do i install it to sata 1 and then durring the install of windows xp tell it to hit f6 for third party scsi drivers and then use the intel sata floppy driver disk that came with my board? it's the MSI-6728 board. or is there anything special i need to do in the bios or what?
    oh yeah. what connection for power should i use? my powersupply has sata and normal, so should i use the sata power connector? and then what's this about legacy or something in the bios, or am i wrong?

    Well first of all, you dont install the Intel S-ATA Driver Disc unless you are going to create a RAID Array....Go into the BIOS and on the "On-Chip IDE Configuration" Page Set the Options like this.........
    On-Chip ATA Operate Mode : Legacy
    ATA Configuration : P-ATA+S-ATA
    Keep S-ATA Enabled : (Greyed Out Yes)
    Keep P-ATA Enabled : (Greyed Out Yes)
    P-ATA Channel Selection : Both
    Combined Mode Operation (At first you have to set this to P-ATA Channel 1, then switch after you Move Windows to S-ATA)
    Configure S-ATA As RAID : No
    Then you are Going to have to Install the OS on The SATA and Just Move the Files that you want to save from the P-ATA HDD and then Remove the P-ATA Drive from the "Boot Device" List in the BIOS....
    You really should List Your Full System Specs. When you POST...Create a "Signature" with your Forum User Control Panel...........Sean REILLY875

  • Novice - How To Install SATA Drive on K8N Neo2 Platinum

    My current 2 SATA drives are almost at max capacity and hooked up to SATA 3 & 4 slots.  How do I go about installing a new SATA drive on slot 1 or 2?  I thought SATA was plug n play and all I had to do was enable SATA ports 1 to 4 in BIOS.  I've searched online and found articles pertaining to limitations on SATA slots 1&2, RAID configuration, VT8237 & Promise 20579 drivers --- and I am utterly confused 
    This is the hard drive that I've been eyeing.  http://www.newegg.com/Product/Product.asp?item=N82E16822148144  I only want to attach it to a bay in my PC and use it as storage, not install Windows.  Can someone provide clear cut directions for a novice like me on how to install it?

    Enable the sata ports, which you intend to use with it.
    Jumper drive to sata I mode.
    Connect new drive.
    Boot into windows and go to disk management where you will see it listed.
    You will need to partition and format it there.
    Once completed it will show up in My Computer and be ready to use.
    http://www.pcstats.com/articleview.cfm?articleid=1778&page=6

  • 2008 - How to make the SATA drives run full speed with Bootcamp and XP ?

    Has anyone found a way - after all this time - of repairing a 2006 install of Windows XP SP2 - or in someway fixing the rather slow SATA drive problems?
    I have not upgraded to 10.5 - but would if the new Bootcamp somehow (via new drivers??) fixed the problem!
    My machine is now 2 years old ( 2.66 4 core ) and I finally need XP's full speed for a project - but most of the posts I've seen are fro 2006 and expired.
    Help!
    -Glen

    And again, my objective to is get 'full speed' from the SATA drives while running XP.
    -Glen

  • Error BSOD when installing SATA drive on 1 & 2 (RAID 0 on 3/4 AOK)

    Hi,
    I have successfully installed Win XP Pro on 3 & 4, & wanted to install a Maxtor 120GB SATA drive on 1 or 2.  When I do this, & enable bios on 1 & 2, windows loads then prompts for a reboot due to the install of new hardware.  After posting & whilst Win is starting, it BSOD with IRQ_NOT_EQUAL_OR_LESS etc.  I shut down computer, remove SATA drive, alter settings back to before in Bios & select last successful settings & computer reboots AOK.  This happens on both SATA 1 & 2.
    Is there a way of having the SATA storage disk on 1 or 2.  Is it best to hot install it with the O/S up, after having changed BIOS settings to enable SATA 1 & 2?

     
    To answer my own question, while computer is turned off, (after taking anti-static precautions) plug power to sata drive.
    Connect sata data cable to M/board, do not connect sata data cable to drive. 
    Enable sata 1 & 2 in bios, boot to windows. 
    Drivers are installed for device. 
    Then carefully plug sata data cable into sata drive. 
    Windows detects new hardware. 
    Enter Disk Management & partition/format to your hearts content.
    Thanks to those who had a look at my post.  Hope this helps someone else.

  • How to silently install a driver using pnputil

    i am using below cmd to install a driver. but it is giving a below windows security alert. i want to install this driver silently because i pushing this driver to a bulk servers. please help me how it install it silently
    pnputil -i -a lsi_sas.inf

    You should be able to write
    CSA-setup.exe /s --autolevel=1 --noreboot=1
    Read more here:
    http://www.cisco.com/en/US/customer/products/sw/secursw/ps5057/products_qanda_item09186a008049ad72.shtml#qa15

  • How to re-install GPS driver - Miix 10 (IdeaPad)?

    I need help to recover from a self-inflicted wound.
    I just received a refurbished IdeaPad Miix 10 (Windows 8) tablet.  I was struggling with getting my navigation software to recognize the GPS (an issue that I have now Googled and while I don't like it, I think I understand it).  In the meantime I saw advice from someone "fixed" their GPS problem by de-installing and then re-installing the GPS driver.  So I tried it.  I de-installed it and then went back to the Device Manager thinking I could click on the device and re-install the driver - but the device is no longer listed.  Then I figured I could have it re-scan and it would detect the device and ask me if I wanted to re-install - that didn't work either.  I think the driver is still on the system - I didn't delete any files - but I don't know it's name or how to install it manually.  The GPS drivers on the Lenovo won't install on my system (been there, done that).
    Hoping someone can suggest a path to recovery. Thanks!
    E
    Solved!
    Go to Solution.

    OK.  I found a program in the Windows directory that scanned for missing drivers and re-installed the driver.
    Once the driver was re-installed, I found that there are TWO places you must configure sharing of location data - once at the system level (which I had configured) and once at the user level (which I had not configured).  Once I configured my user to share location data and restarted Oziexplorer, I found that it was receiving position data.

Maybe you are looking for