How do I install Snow Leopard onto a blank hard drive?
I just got a hard drive for my macbook and I cant install it i boot with the disc holding "c" etc. what do i do?
After selecting the language in the installer, Select Disk Utility from the Utilities menu.
Select the disk in the list and select the Partition tab. Choose 1 partition and click the Options button. Set the partition table to GUID. Give the volume a name, set it for Mac OS Extended (journaled) and click the Apply button.
Similar Messages
-
How do i install snow leopard on a new hard drive
My hard drive went bad on my macbook pro and had to install a new on. Can anyone help me install snow leopard? When i try it doesn't see the new HD.
I am hopeless! Try as I might I can never get my external hard drive to be my startup drive. In summary,
I have a brand new Western Digital blue caviar HD, which I formatted as 2 partitions, both extended journaled with GUID partition.
I tried 2 different ways to install SL onto one of the partitions. I tried to boot up the SL Install disk holding c key, but the internal HD prevailed as startup, with the Install disk showing up on the desktop. I chose INSTALL and specified on one of the partitiions of the external drive. i ended up with one folder called: MAC OS INSTALL DATA, but it would not boot up when I restarted the computer, holding the option key down. I next tried using System Preferences to select the partition as a startup BUT its icon did not appear so I couldn't choose it.
I decided to choose the Install Dvd as the startup (given that holding c key on booting would not work to boot the Install dvd). However, as above, when I went to select the partition as the disk for the SL install, its icon was again not visible.
However, both of the partition icons DO appear on my desktop when I reboot the computer using the internal HD as the startup. I can't see what I am doing wrong. -
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading. -
I have a 2007 Macbook Pro that is running 10.7.5 and I am trying to use a 10.6.3 DVD to install Snow Leopard to an external hard drive. I've followed every possible instruction on every which website. The problem is when I boot to Install disc, I am unable to choose which hard drive I'd like to install the OS on. It says that it is unable to Install and automatically takes me to Restore and suggests that I restore to Time Machine backups. Any and all help is appreciated.
lovinlife5959,
have you tried booting from the grey Mac OS X Install DVD that originally came in the box with your MacBook Pro? See if you can install its version of Mac OS X (either 10.4.9, 10.4.10, or 10.5.0, depending upon when it shipped from the factory) onto your external hard drive. If that works, boot from your external hard drive, run Software Update on it, and then try updating your external drive to 10.6.3 via the white Snow Leopard DVD. -
I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation in details. Can you also please let me know about this boot camp.
You cannot. From a legal standpoint, the license agreement for OS X mandates that you run OS X only on Apple hardware. HP is not (yet) owned by Apple.
From a technical standpoint, your HP laptop doesn't use EFI, but rather an early predecessor called a BIOS. Apple is the only vendor of consumer computer hardware that uses EFI; other vendors reserve EFI for use in servers.
Secondly, Apple's operating systems support a rather limited number of configurations of video hardware and mainboard chipsets directly since they need only support those systems that they manufacture. You cannot use Windows software or drivers on OS X, so prior to installation, you would need to write your own hardware drivers for your laptop, create an OS X drive image on a Mac, and then modify that image with your drivers before putting it in the HP.
It will be simpler (and legal), to simply purchase a used Mac. Apple's online store has refurbished MacBook Airs starting at $850 and Mac Minis for $700. If you go to e-bay or craigslist, you'll find used Macs for considerably less. -
Can I install snow leopard on an external hard drive in order to run my quicken 2006, and install lion on the hard drive of my imac?
You don't need to erase the drive and repartition from scratch. You may be able to add a second partition on the fly. The caveat here is that once you do that you cannot create a Windows partition using Boot Camp. Of course if you have no plans for Boot Camp then it isn't relevant.
To create a second partition on your existing startup volume:
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Now, you cannot add a new partition that exceeds the amount of contiguous free space at the end of the drive. Disk Utility will fail to add the partition if it cannot find sufficient contiguous free space. If that's the case then you will need to follow your state outline - backup, boot from clone, erase internal, repartition internal, restore backup to one of the partitions (or both in your case.) -
Why can't I install Snow Leopard on my videos hard drive?
I have a Mac Pro with four hard drives. Lion is on the primary drive but I need Snow Leopard for a legacy app. My plan is to install Snow Leopard on a hard drive that I use for video projects, and then restart from that drive when I need to use the old app. The problem is that the Snow Leopard installation disk says that it can't install onto the videos hard drive unless I partition the hard drive, which will erase all the data. Why can't it install onto the videos hard drive? There's no operating system on that hard drive. The hard drive has folders for Final Cut Express Projects, iMovie Events, iMovie Projects, DVDs movies I've ripped, a folder of music, and an iDVD project. What do I need to remove to enable installing Snow Leopard?
If I understand what you are saying you have a drive with "stuff" already on it and you want to install a version of OSX on to it while still retaining that "stuff". If that's what you want to do you cannot do that mainly because there's already "stuff" on that drive.
The only way you can do this is to either of the following:
a. Copy the "stuff" off that drive to another drive. Install the OS. Copy the "stuff" back on to the newly created boot drive.
b. Copy the "stuff" off that drive on to another drive. Partition the drive into at least 2 partitions; one for the boot and one for the "stuff". Install the OS into one of the partitions. Copy the "stuff" back to the other partition.
Either way, if you want to use that disk for a boot disk, you got to get that "stuff" out of the way to do the OSX install on to that disk. -
I've just had my hard drive go caput and after purchasing a new one was inclined to install snow leopard but received an error message when attempting to do so.
I did not create a back up or restore file before I decided to upgrade from snow leopard.
I'm wondering why am I not able to simply install snow leopard on a brand new hard drive. What would clue it into me having had ran lion before and why can't I simply delete that kernel or said file. It makes completely no sense to me. I come from a pc world where if I choose to format a hard drive, I can do a clean install of whatever OS I choose. After all I only paid for my laptop as should be able to do with it what I wish.
Any suggestions or insight would be greatly appreciated1. Was Lion on the machine and trying to downgrade?
2. If so this might be an issue. Newer machines are done for current OSX.
3. If you have Lion on your machine try to install Snow Leopard on another partition or portable HD
4. After you format and install SL on the other partition or drive Try to boot from this machine retarting and holding the Option key at boot up.
5. See if that work.
This is a trial and error way but Mountain Lion is right around the corner and Snow Leopard is 2+ yrs old.
Brian -
How do I install Snow Leopard onto a COMPLETELY BLANK hard drive?
My Macbook Pro's hard drive bit the dust last week so I bought a new one. This has NOTHING on it. No operating system, no files, nothing. I have a Snow Leopard installation disk avaliable to me. I can put in the disk and it will show the Apple logo but before long my computer beeps at me. I looked up that problem and it seems that there is something wrong with the RAM, however, there was nothing wrong with it before my hard drive died, so I can't imagine what could be wrong with it. I tried to take it out and put it back in but that didn't work. I have tried starting up with the alt/option key, but I cannot get my computer to connect to my wifi, not even through a direct connection. I "stole" a neighbor's and clicked on the internet recovery option (the only one that showed up on the screen. It then said, "Internet Recovery Starting. This may take a while." And the little globe started to spin. But then the globe stopped and there was a triangle with an exclaimation point in the middle of it. Underneath it said "apple.com/support" and underneath that in pale letters it says "-1005F". I have NO idea what that means. I tried typing it into my internet browser (on a different computer, of course), but to no avail. I have given up for now, with the hope that someone out there holds the answer. Thank you so much for reading and I hope you know what to do because I am going absolutly insane.
I need to know the model MBP you have. On the bottom is the serial number. Enter it here and post back.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Ciao. -
Need Help Installing Snow Leopard onto a blank HD via Target Disk Mode
Hey everyone.
Recently I had the HD on my Black Macbook crash due to a mechanical failure. I have just purchased a new Hard Drive for my Macbook. It is completely blank other than the fact that I connected it to my girlfriend's White Macbook earlier today to create 2 partitions. I have a new copy of Snow Leopard that I want to install on it and was hoping someone could guide me through the process.
What I have with me as of now is:
One Black Macbook (UK bought) w/ Partitioned Blank HD and a non-functional Superdrive
One White Macbook (US bought) running Tiger w/ working Superdrive that mounts the SL DVD
FireWire Cable
New Snow Leopard DVD
My first attempt at this failed. I connected the two Macs with the FW cable and started up the Black Macbook in Target Disk mode. Both my HD partitions showed up on the White Macbook. I inserted the SL DVD into the White Macbook and when it mounted I clicked on install. Of course, now it thinks that I want to install SL on the White Macbook whereas I want to install it on the Black Macbook.
I'm a college student without a working computer and with my finals coming up, I'm in deep trouble. I want to mention that my Black Macbook's Superdrive spits out _everything except for Movie DVDs and My Leopard Startup Disk._ It spins the SL DVD for a few seconds and spits it out as well. I'm wondering whether this might be an issue with the DVD region code on the SL DVD though I don't think that's it. My region code is currently set to Region 1 (US) where I purchased the Snow Leopard DVD off Amazon. I initially thought there was a problem with the DVD and CD lens in the drive and I bought a DVD/CD Lens Cleaner CD but I can't run it because the Superdrive spits that out too. I'm out of warranty on the Black Macbook so fixing the Superdrive is pretty much out of the question. I was under the impression that I would be able to install SL via Target Disk Mode without any hassles but boy was I ever so wrong.
Is there any way that I can do this? I'm hoping someone here can help me out. Please do if you find the time to.By other computer, do you mean the White Macbook? So I should basically put the SL DVD in the White Macbook, restart with the C key held down? Is that right?
Please pardon me if I'm being stupid. -
How to re-install Elements 10 onto iMac without hard drive?
I originally bought Elements 10 on a disk, which I loaded onto my macbook. I have now bought an iMac, and the file transfer of the elements 10 from the MAcbook to the iMac didn't work. Adobe support tell me to re-install Elements 10 into the iMac. But the iMac doesn't have a hard drive and the adobe products page has my serial number of Elements 10, but it doesn't give me a download option because it was originally bought as a disk, not as software - so how do I reinsall elements 10 into my iMac?
SarahHi Sarah,
You can download Photoshop elements 10 from the below mentioned link.
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Please read the 'Very Important Instructions' before starting to download the file.
You can use the same serial number which you have in your Adobe account.
Thanks
Kapil -
How do you install 10.7 onto a new hard drive
I have a 2008 Mackbook pro with a 200 gb hard drive which is full.( it filled up very quickly after installing 10.7. I have the 10.5 disks that came with it and the 10.6 disks that I got from Apple last year. Then I upgraded to 10.7 by downloading it from apple. I have a time machine back up copy of my system on a firewire hard drive.
I am going to Install an new hard drive and was thinking of doing that myself to save a few dollars of instalation fees, but I am not sure haw to reinstall 10.7?
Do I Install 10.6 from the disks and then download 10.7? Do I have to upgrade to 10.6.8 and then 10.7? Or is there some way of getting directly to 10.7?How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
How to install Snow Leopard onto external hard drive.
I'm currently running on 10.5.8, and I just bought the Snow Leopard installation disc to update to 10.6.3.
My mac has been running on an external hard drive for about a year. The internal just stopped working.
I want to install Snow Leopard onto my external hard drive, but all of my files are on there, and I read that if I do the install, all of the data will be erased.
If I used time machine to back up the files before I do the install, are they at risk of being erased, since they will be back-uped on the external?
This is probably super obvious, but I want to be very careful with this.
Any help is very much appreciated!
^__^1. The data won't be erased unless a problem occurs.
2. The Time Machine backup should be on a different drive, as drives can fail.
(92634) -
I have an older (circa 2006) MacBook running Tiger. I've been able to install Snow Leopard on an external hard drive and when I restart, it seems to boot from the external drive. However, it asks for a user name and password and the combination I use in Tiger doesn't work. I don't get an option for an admin user/password.
Any suggestions?If you did a fresh installation from the original installer disk, then unless you used Migration Utility as part of the installation then you would have been stepped through the process to set up a user acount. Without that there would be no account to log into. So either you don't remember, you didn't install on an empty drive, or you used Migration Utility.
In any case, boot from the original installer, select the external drive, and under the Utilities menu choose Password Reset.
Regards. -
How do I get Snow Leopard onto my Blackbook?
Hi folks.
With Lion coming up, I have to have 10.6.8 on my Blackbook. A drive recently failed and I have installed Tiger onto it. My Pro has Snow Leopard on it, but I can't install it onto my laptop. How can I get Snow Leopard onto it?
CheersBuy a copy of the retail Snow Leopard DVD at an Apple store - $29.00.
Maybe you are looking for
-
I am moving back home to live ,currently I have ipad2 ,4s iPhone ,wife 4s and daughter iPhone 5 ,pad 4th gen and iPod touch ..all different iTunes account s but only one invoice which is mine ...can we share and if so how ?
-
Apple Pro speakers with mini jack connect to new Intel iMac ?
I would like to be able to connect the pair of perspex globe Apple Pro Speakers with mini-jack that came with my PowerPC G4 Mac to my new Lion desktop Intel iMac. However, the mini-jack is too small for either the ' audio in / optical digital audio i
-
Hihi, Long time lurker, first time post:-) I've not seen my problem posted before, so I would be grateful for any help. For the last 2 weeks when trying to download large files from Apple and Microsoft (or wherever) I can download between 20 to 90 pe
-
Bc4j jsp calendar deployment problem
Using jdeveloper 9.02 I made a simple webapplication with bc4j jsp's and deployed it to oc4j (9.0.2.1) directly from jdeveloper as described in the help. This works fine, except for the calendar (datepicker). When the calendar is loading in a separat
-
Windows Sharing and resource fork problems
Hello, I am into my second month of Mac ownership and today I tried to enable Windows Sharing to allow a PC here to map to the Mac and share files. I enabled the Windows Sharing feature in the System Preferences. Then I tried to map to the mac using