How do I install Speech Analysis Models for PPro CC?

I downloaded the International English speech analysis model from here:
http://www.adobe.com/uk/products/premiere/extend.displayTab3.html
Which says they're for CC as well as CS6.
But when I install it, I don't get the option in CC to analyze clips using anything but US English.
The models are installed here:
C:\Program Files (x86)\Common Files\Adobe\SpeechAnalysisModels\CS6 so I tried creating a CC model, copying the CS6 content across, and restarting Premiere. No joy. What else can I try?
Cheers
Mark

joshweiland wrote:
To clarify, you created a new "CC" folder inside C:\Program Files (x86)\Common Files\Adobe\SpeechAnalysisModels\ and put the files there?
Exactly that. Also tried naming the folder CS7 and CS7.0
joshweiland wrote:
If that doesn't work, perhaps try putting them in the 64-bit Program Files folder, like the following:
C:\Program Files\Common Files\Adobe\SpeechAnalysisModels\CC\
There is no SpeechAnalysisModels folder inside the 64-bit Program Files folder.
But I tried your suggestion, and tried the different names for the folders as above.
No success.
Thanks for your suggestions, though.

Similar Messages

Downloaded a spanish speech analysis model for Premier CC but it appears as if it has not been applied to the settings, I cannot select spanish in the analyze window.

I just downloaded a Spanish speech analysis model for premier cc, installed it, restarted premier, started a new project, did both multiple times, even reinstalled the model and I still cannot select Spanish as a language to be analyzed in a project... Any ideas?
-Cheers

Nevermind. I finally found a third party answer and will post it for anyone else with my problem.
>Go to the iTunes store.
>Halfway down the page, right hand side, says account
>Under account it says purchaced, select that
>Wa-la

I have premiere pro cc and i can't put the speech analysis models spanish for adobe premiere pro cc

I have Premiere Pro CC and I can't put the Speech Analysis Models Spanish for Adobe Premiere Pro CC, they're installing on the folder CS6 and when I try to analyze it only appears on english... If anybody can help me

the messsage is for forum housekeeping and is not a message directed to you.

Speech Analysis Model-Spanish

Even after I download the Spanish Speech Analysis Model, the Spanish language is still greyed out when I try to "analyze content" on my clip. How can I download it so that the option will be available?

So I think I found the solution to the problem, Titan. It's very unhelpful on Adobe's part, but the solution is to install the language modules using Adobe Exchange. Open Premiere and go to Window>Extensions>Adobe Exchange and install from there.
See this article for more info: Install additional speech libraries

Installing speech analysis in Premiere Pro

What are the specific steps in installing speech analysis (premiere_cs5_speechanalysis_mac_ie) in Premiere Pro after I download it?

Hi Vinay Dwivedi,
I Download and install the speech analysis, but it seems to be installed in the CS6 folder, I'm running CC, and just keep Encore CS6 to have DVD Authoring.
I don't know how I can say to Premiere CC where is the file for speech analysis.
Thanx for your help

How do I install speech CS5

How do I install Speech in Premiere Pro CS5. I have downloaded International English, and Spanish. But when I am going to select Analyze in the "meta data" panel, the dialogue box "Analyze content" that comes up does not show any "reference script" when clicking on it. It shows "none, add, remove". When I am selecting add for me to open up a "adobe story script" with the extension " *.astx, *.txt". There are no script available.
The folders are there, but not any *.astx of *.txt file.
I wish there was an video tutorial on HOW TO INSTALL speech analysis with additional languages. But it does not even work for me in English language.

joshweiland wrote:
To clarify, you created a new "CC" folder inside C:\Program Files (x86)\Common Files\Adobe\SpeechAnalysisModels\ and put the files there?
Exactly that. Also tried naming the folder CS7 and CS7.0
joshweiland wrote:
If that doesn't work, perhaps try putting them in the 64-bit Program Files folder, like the following:
C:\Program Files\Common Files\Adobe\SpeechAnalysisModels\CC\
There is no SpeechAnalysisModels folder inside the 64-bit Program Files folder.
But I tried your suggestion, and tried the different names for the folders as above.
No success.
Thanks for your suggestions, though.

CS5 Speech Analysis Tool For Transcription, Acceptable Media Types?

Hi all,
I've been fiddling with the oh so handy, speech analysis toolin CS5 PPro, and can really see the potential for cutting down on transciption time. I spent a bit of time poking around the CS5 PPro help document, as well as tutorials via lynda.com etc. to gain a bit more insight into the file types that the speech analysis will accept and am drawing a blank other than the observations I have made doing a bit of experimenting with the feature. So far, I can not get the tool to recognize 2 of our 3 cameras, native media. Currently it will analyze only raw media shot via SDHC Class 6 cards on a JVC HGMY700 in 1080i60 format. The other two camera/media types in question are Panasonic P2 MXF files and Ikegami HDS-V10 MXF files, both are also 1080i60 format.
Is there perhaps a codec/plug-in etc. available to access the speech analysis tool with these other types of media? I have found it works well with quicktime .mov files, but I might end up spending as much time waiting to convert the file to an .mov as I would just transcribing the old fashioned way.
Any insight on how I might best utilize this tool would be greatly appreciated. Thank you!
On a separate random note, if anyone has any useful info, links or otherwise, in regards to media management using CatDV and Cache-A for archive, it would also be appreciated. That's one of many projects looming...
Lindsay

Believe it or not, it has nothing to do with the media type--well, specifically, it doesn't have anything to do with the format or codec.
So, what's the problem? Annoyingly, Panasonic P2 structures are write-protected--that is, they're marked as "Read-only." While this isn't much of a problem in normal operation, when you try to do things like speech transcription (and other metadata entry, if I recall correctly), you'll effectively be shut out. The files in the structure are writeable, but the structure itself is not.
Yep. Weird.
What to do? In Explorer, simply right-click the CONTENTS folder (you might even be able to do this at the top level, if you save your P2 offloads in that way), click Properties, and clear the Read-only checkbox in Attributes. Once the Read-only attribute is cleared, you should be able to run Speech Analysis on the P2 clips. You'll probably want to change the Read-only flag with Premiere Pro closed.
Now--that might not solve it. There seems to be a latent bug in Pr that prevents you from running Speech Analysis on a single P2 MXF clip. If this seems to be the case, try selecting two or more clips in the Project Panel, and then check to see if the Analyze button or Analyze Content menu command is available. Pretty silly, but at least its a reasonably painless workaround.
Hope that gets things working for you.

Where are the speech analysis models?

I'm evaluating Premiere Pro CC and like others am struggling to install an additional (specifically the international English) speech analysis model under OSX 10.8.5. The file downloads to a disk image and the Application Manager launches and runs. However the CS6 International Speech Model is not installed in the default location (Library/Application Support/Adobe/SpeechAnalysisModels/CS6) and I cannot find the folder or files located anywhere else (ie through Finder.) On subsequent attempts Application Manager provides info that "an earlier installation of this product was found" etc. The new language option is not available in PP 7.1.0. What am I doing wrong...?

Hi Tim,
See if this KB doc helps you: http://helpx.adobe.com/premiere-pro/kb/installing-additional-speech-libraries.html
Thanks,
Kevin

Adding Speech Analysis models to SB 2.0

Hi, I was wondering if anyone know how I go about adding additional Speech Analysis models to SoundBooth 2. Specifically UK English as the Master Collection installer only seems to offer US English.
Many thanks in advance
m

After searching a bit harder I finally found the link: http://www.adobe.com/products/soundbooth/speechtotext/
Be warned, they are pretty big (Intl English is ~445MB)
m

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

The wacom site will have the drivers for you.
http://us.wacom.com/en/support/drivers

How do I install software (specifically Office for Mac) on a MacBook Air?

How do I install software (specifically Office for Mac) on my MacBook Air? Thanks.

Q7: How do I activate?
A7: To activate the product, follow these steps:
1. Launch application and click Enter your product key.
2. Review the Software License Agreement and click Continue.
3. You must agree to Software License Agreement. Click Continue.
4. Enter your product key and click Activate. The Activation Wizard automatically contacts the Microsoft licensing servers through your Internet connection. When you activate the product by using the Internet, the product key is sent to Microsoft through an encrypted transfer. If you decide to activate the product through the Internet and you are not already connected, the wizard alerts you that there is no connection. Click either Activate by Phone or Activate later. Note Do not lose the product key. Keep the packaging, or note the number. Keep the number information in a safe location. Your product key is a unique sequence of 25 letters and numbers divided into groups of 5. If you purchased a box with a DVD: The product is located on the back of the Office for Mac DVD sleeve. If you purchase through a web site: The product key is sent to you in email with the title Microsoft Office for Mac – Order Confirmation”
5. If the activation is successful, you receive the following message:
Your copy of <product title> is now activated.
If for any reason the Activation fails, click Activate by phone. Select your location and then dial the phone number on the screen. For example, for United States: 1866-825-4797 or United Kingdom: (44)-(203)-147-4930. You can telephone an Activation Center to obtain the help of a customer service representative and activate the product. Telephone activation might take longer than activation through the Internet. You should be at the computer when you call. Additionally, you should have your software product key. When you select this option, the Activation Wizard generates an Installation ID. You musy have this Installation ID to activate the product by telephone.
Important When you telephone the Activation Center, you are prompted to read the Installation ID numbers.
Note Activation Center numbers are not listed for all locations in this article because telephone contact numbers vary by license and also by country or region. The Activation Wizard gives you the number to telephone the Activation Center.

After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it?

After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it? What apps can i download to do this type of work.

.dmg.part is not a complete file.. It usually indicates that the entire file has not been downloaded yet. Are you sure you downloaded the entire file? (i recommend updating itunes through  > Software Update
Alternatively, you can download it from here: http://support.apple.com/kb/DL1614

How do i install oracle plug-in for microsoft IIS ??

how do i install oracle plug-in for microsoft IIS ??

I'm not sure what is that plug-in that you talk about.
If you mean the mechanisms that allows IIS to be the entry point to Oracle9iAS then you should probably ask this in the iAS discussion forum. or look for it in the online documentation on OTN.

How could I install a plug in for Aperture?

how could I install a plug in for Aperture?

OK no installer, not nice but not fatal.
I assume you already downloaded the file from the web site. Locate it in the Download folder and double click it. That will extract the plug-in from the zip file.
Now the tricky bit. The Library folder in your Home folder is no longer visible in Lion (thanks Apple ) There are ways around this the easiest is to open Finder hold down the option key and select Go from the menu bar. Your Library folder will be visible in the list of folders shown. Select it.
You are now in the Library folder, select the Application Support folder and then select the Aperture folder. If you have no other plug-ins installed you will need to create the Plug-Ins folder, do that. In the Plug-Ins folder create the Export folder. That is where you will copy the plug-in to.
So open another Finder window locate the plug-in you extracted from the zip file and drag it to the Export folder. Restart Aperture and the plug-in should be visible in Aperture.
Good luck.

Where do I find and how do I install the plug in for CS6 , automated picture packages?

Where do I find and how do I install the plug in for CS6 , automated picture packages?

Picture package does not exist for CS6.
Mylenium

How do I install Speech Analysis Models for PPro CC?

Similar Messages

Maybe you are looking for