How do I install the firmware update for LinkSys E900 router?

Hi,
I'm using Mac 10.7.5 and a few months back had purchased the E900 wireless router.  It has firmware 1.0.03 installed and I noticed there is a 1.0.04 update.  I downloaded the update, which is a .bin file, but I do not have a CD burner nor access to a Windows machine.  How can I install the firmware update?
Thanks, - Dave
Solved!
Go to Solution.

Simple, with your wired computer (never wireless) just access the GUI in the router and perform the firmware update.  Just point to the .bin file and away you go.  Make sure to hard reset the router and reconfigure it after you are done.

Similar Messages

  • How do i Install the Software Update Server for Windows 7?

    How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
    I downloaded the software so How do I install it?
    Do I install it all over again or when I have windows open?
    I am using Bootcamp.

    Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

  • Is Yesterday I installed the latest update for Waterfox, today I have a Bing product on my computer which has crashed it twice thmorning. How do I remove it?

    Yesterday I installed the latest update for Waterfox, today I have a Bing product on my computer which has crashed it twice this morning. You put it there, tell me how to remove it completely.

    Please see Waterfox support here:
    http://www.overclock.net/t/975626/waterfox-36-0-1-11-march-firefox-64-bit

  • Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

    Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

    Check your Network control panel and turn off Auto-Proxy setting.
    This is one of the top #4 "how can they do this' pet-peeve errors.
    The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
    Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
    If auto proxy isn't it, router/modem and DNS settings.

  • How do I install the RC updates to my PS CC, camera raw and Lightroom?

    How do I install the RC updates to my PS CC, camera raw and Lightroom? I have downloaded the correct versions from the Lab site but I still can't open my Nikon D-610 RAW files. The site says follow on screen instructions but I have not found any. Help please.

    Please ensure that for CC you have downloaded ACR 8.3 - CC:
    http://labs.adobe.com/downloads/cameraraw8-3-cc.html
    Please extract the downloaded .zip file to Desktop and then run .exe file.
    After successful installation try opening D610 files, This should work.
    Regards,
    Ashutosh

  • I can not install new update in Photoshop CC, does any one know, how I can install the new update?

    I can not install new update in Photoshop CC, does any one know, how I can install the new update?
    Photoshop CC show me, if I look on "Help" -> Update, there is no update. But my actual license is very old....
    I tried it, to do it manual. But there is also some problem.

    totally agree.  at this point i could care less if "apple" supports it.  i'm not renting my ipod touch, it's mine.  i paid for it.  and i'm not asking to do anything illegal with it, all i want is to get rid of this POS ios6 and get back to being able to use my ipod touch the way it was before...working. 

  • HT1926 I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll.  error 7 (windows error 126)

    I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll.  error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

    After installing the safari update for windows, outlook is now not opening email hyperlinks.  I have set safari to be my default browser but outlook won't open it when I click a link.  I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator."  Please help.

    Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
    This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
    To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
    * http://windowssecrets.com/forums/
    * [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
    * [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

  • Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    The wacom site will have the drivers for you.
    http://us.wacom.com/en/support/drivers

  • I am unable to install the newest update for itunes and quicktime because of a bonjour error about path not being located

    I have windows 7 and I have been trying to install the newest update for itunes and quicktime but I keep receiving the same Bonjour error. I even tried to do it manually and no luck. I also tried to unistall bonjour but it would not even allow me to unistall it either. No matter what I do I get the same error listed below:
    The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
    I would greatly appreciate any help because this appears whether i am trying to install the updates or remove bonjour to reinstall. I am stuck.
    Thank You in advance!!!

    The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • I am attempting to install the latest update for Photoshop CS6 and it failes.  Message U44M1P7

    I am attempting to install the latest update for Photoshop CS6 and it failes with a message U44M1P7.  I have a one year cloud subscription for this that expires in 2014.

    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html

  • HT5654 Trying to install the latest update for itunes...error received "service apple mobile device failed to start.  verify thay you have sufficient priveleges to start system services"...?  I have unistalled and tried to reinstall???

    Trying to install the latest update for itunes...error received "service apple mobile device failed to start.  verify thay you have sufficient priveleges to start system services"...?  I have uninstalled and tried to reinstall???

    Hello Kimberly0914,
    It sounds like you have tried to launch iTunes after a recent update due to this error message, and you cannot install iTunes after uninstalling. I recommend the troubleshooting from the following article to help you named:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Then download and install iTunes with this link:
    http://www.apple.com/itunes/download/
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • HT1222 i have installed the latest update for itunes, (win 8 os) itunes no longernplays my music???

    i have installed the latest update for itunes, (win 8 os) itunes no longernplays my music???

    Hi Mike H555,
    If you are having issues with iTunes after an attempted update, including device recognition issues, you may find the following articles helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • The boot camp manager keeps quitting after re-start with an error message, why? I've installed the latest updates for XP 32bit

    The boot camp manager keeps quitting after re-starts with an error message, why? I've installed the latest updates for XP 32bit

    Alveto wrote:
    The boot camp manager keeps quitting after re-starts with an error message, why? I've installed the latest updates for XP 32bit
    Are we supposed to guess what the error message is?

  • Where do I find and how do I install the plug in for CS6 , automated picture packages?

    Where do I find and how do I install the plug in for CS6 , automated picture packages?

    Picture package does not exist for CS6.
    Mylenium

Maybe you are looking for

  • Report problem with BAPI_MATERIAL_SAVEDATA (help required)

    hi all, i am using this source code to create material using BAPI_MATERIAL_SAVEDATA. when i am executing the program, i am getting message the material no 512 transferred without leading 0. but when i am checking the mara table i am not getting the m

  • Shockwave flash constant crashing

    Since updating from firefox 26, I have experienced constant shockwave flash hangs in both Firefox and Chrome. I have done numerous rollbacks, uninstalls, clean reinstalls, and driver updates. Anything that fixes the issue only fixes it for a few hour

  • Script running in background mode

    hi,      I am running the report HBRDARF0 in background mode, this report gives Sap Script(script name: HR_BR_DARF98) as the output while  viewing the spool data am unable found sapscript data in spool.  one more query, by using the fm: CONVERT_OTFSP

  • Export .wav with markers from Audition into Premiere Pro CS5.5

    Hi, I need help in getting a multitrack mixdown with markers from Audition into Premiere. This is what I have: An Audition CS5.5 multitrack session with lots of markers This is what I did to export: Audition > File > Export > Multitrack Mixdown > Ent

  • ITunes store AU. HD movies. What gives?

    Just went to buy an HD movie through my AppleTV from the AU iTunes store. The movie I wanted, Earth, is available to rent in SD & HD but is only available to buy as SD. Not in HD. I tried to call Apple but after about 15 minutes on the phone was cut