How do i install the Motion2 content?

Sorry for the lame post, but I have RTFM and tried installing Final Cut Studio all afternoon and it just wont install the Motion content or Live Type content.
The apps themselves seem to be fine and i have even registered and got the new free filters, but why oh why wont it install the content? What am i doing wrong?
Its a fresh install (reformated disk) tiger with the latest software updates on a G5 Dual 2.5Ghz. nothing else on there!
I have tried repair permissions too. I thought fresh install on a virgin os it would be so much easier....... How wrong i was.....
Please, someone help me or point me in the right direction.
Many thanks!

No, not the additional filters you get when you register installed fine.
On the install disks (motion) there is a pkg called "install motion content" - it gets about half way through then quits saying it wasnt installed properly.
the app itself (motion) works fine, but there is nothing in the templates or tutorials etc.
In theory (and according to the docs) motion should install this content whilst installing, but it didnt - hence i tried installing it from the "install motion content" icon.
The disks are brand new from apple as part of final cut studio 5, so i doubt its a bad disk. Any ides would be nice.
Is there a way of viewing the contents of a .pkg file or extracting it manualy? I do wonder if the pkg is corrupt.
Any ideas much appreciated.

Similar Messages

How do I install the additional content file (PRE7_Cont_WWEFGJ) that I downloaded with Premiere Elements?

Additional content for Premiere Elements 7 can be found by following the link in the article linked to at the end of this FAQ.
You'll need to log in to your Adobe account, and then you'll see the link to the download on the same page as the Free Trial download.
John Venediger received this from Tech Support, based on his problem installing additional content (including templates and themes):
When trying to install/open the contents file (PRE7_Cont_WWEFGJ) you get this message - The setup has detected that premiere elements is currently in use. Please close Premiere Elements, then launch setup again despite the fact that Premiere Elements is not in use.
To resolve this issue, please perform the following steps:
1. Right-click the Microsoft® Windows XP® taskbar and select Task
Manager.
2. Under the Applications tab of the Task Manager, please ensure Adobe
Premiere Elements or Photoshop Elements is not running in the background.
3. If Adobe Premiere Elements or PhotoShop Elements is running in the background, please
select the application and press End Task.
4. Next, switch to the Processes tab and look for a process named Adobe
Premiere Elements.exe. and Photoshop ElementsEditor.exe.
5. If Adobe Premiere Elements.exe or Photoshop ElementsEditor.exe. is running, please select the process and press End Process.
If you are still unable to install the additional content, please refer
to our knowledge base document kb404997. Perform step 8 and try the
installation again. Continue to step 7 if necessary. To access the
document, simply copy the following and paste it in the address bar of
your web browser:
http://www.adobe.com/cfusion/tdrc/index.cfm?loc=en_us&product=premiere_elements

Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

How can I add the audio content cd after logic finished installing ?

There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
If you can help me please be very specific as to how to do it so that I can follow the directions properly.
Please help me.
Thanks

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
What versions of iPhoto are on your iPhone and your Mac?
however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll, and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see: Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
-- Léonie

I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)?

I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)? It does not have a CD drive.

If all else fails, try this. i used to do it all the time before. might or might not work with the new office.
if you have access to another computer with a cd/dvd rom, copy the entire contents of the cd on a thumb drive.
insert the thumb drive in your MB and do the install from there.
However, if you have the newer version of MS Office, Bandit's suggestion is much better.

How do i install the ibooks free app?

how do i install the ibooks free app?

By 'desktop' do you mean your iPad's homescreen or a desktop computer ?
If your iPad then try closing the App Store app via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the App Store app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the AppStore app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Whether you will be able to install the app will depend upon what version of iOS that you have on your iPad (Settings > General > About > Version) - the version of iBooks that is in the store needs iOS 5+

How can I install the Flash Debug Player in Internet Explorer 10?

I just downloaded the Flash Debug Player 11.4.402.287 from http://download.macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_ax_debug.exe - however, trying to install it merely shows a message box saying
The installation encountered errors: Your Microsoft Internet Explorer browser includes the latest version of the Adobe Flash Player built-in. Windows Update will inform you when new versions of the Flash Player are available.
I'm using Internet Explorer 10.0.9200.16384 on Windows 8. A bit of Google research suggested that IE10 has a Flash player built-in (similiar to what Google Chrome has) so I looked for a way to disable the player. It seems that this is indeed possible by clicking the Cogwheel icon in the IE10 toolbar and then selecting 'Manage Add-ons'. The dialog which shows up shows a 'Shockwave Flash Object' entry. However, even with the built-in Flash player disabled, the Flash Debug Player installer keeps giving the same message.
Does anybody knwo how I can install the Flash Debug Player in IE10?

I do not know, but check if there is anything useful in http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flas h_player_windows8_admin_guide.pdf

Error in Installing the Business Content for 2LIS_06_INV data source

Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha Jagannath

Hi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards.

How do I install the Universal Crossword Print Widget?

The Universal Crossword Print Widget has been discontinued, and there will be no new content. However, you can still receive the Universal Crossword printable by subscribing on your HP web-enabled printer’s front panel, or by visiting HPConnected.com (in the U.S.) or ePrintCenter.com (elsewhere). Note: You will need an HP web-enabled printer to subscribe.
Here’s how to uninstall the Print Widget:
Click the Windows Start button.
Click Control Panel.
Click Uninstall a Product.
Select Universal Crossword Print Widget, then click Uninstall.
Universal Crossword Print Widget (c) 2011 Universal Uclick. All Rights Reserved.
I work on HP's behalf.

Hi 57055:
First of all, there is no charge of any kind for the Universal Crossword widget or any of the content. Any charges you are seeing are not for this application or for the crossword - if you are seeing charges and think they are for this application, something is wrong. You should look into having those charges cancelled if you do not know what they are for.
Please run through the uninstall and reinstall steps one more time. The uninstall steps are very important - just deleting the icon, for instance, does NOT uninstall the program.
So, first, uninstall. Follow the steps here: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/How-do-I-un-install-...
Then reinstall, following the steps at the top of this thread (http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/How-do-I-install-the...)
I work on HP's behalf.

Install the business content

Hi Bi experts,
i need to install the business content of the purchase contract ODS and Cubes. now we are using the netweaver 2004s. can any body explain the how to install the . one more i should not overwrite the existing active objects. how do i know datasource of the that ODS. can anybody tell the how to find the datasource for respective ODS.
thanks in advance
regards
amith

Hi
To see the corresponding datasources of the particular ODS
u have to view thru help.sap.com.From there you have to go thru BI Content - and click Netweaver2004's.
From there check which industry your ODS belong too and then you will find your datasource and correponding logic , cubes , standard reports..
To install BI content.
1. Use tcode RSA1
2. Select BI Content
3. Find Datastore object
4. select and find teh name of ur ODS and darg to the right pane.
5. Once you drag on the right side, you will find cxertain objects in green status color - theese are the objects which are installed in your BI . make sure you dont check it otherwise it will overwrite.
6. the objects which are not green should be checked. BI Content automatically checks only those components which are not installed.
7. Select Grouping "In dataflow before and after "
and then click Install
8. your BI content will be installed finally.
Assign points if helpfull
From
Manesh

Hi, how do you install the extra alpha transitions?

I have just upgraded tot FCP 7.
How do you install the extra alpha transitions?
thanks
Frank

They're not extra transitions. They're content to use with the alpha transition. You import the content into your project Do you know how alpha transitions work? Read the section in the manual on them.

HT3678 how do you install the quicktime pro if you have quicktime version 10.2?

how do you install the quicktime pro if you have quicktime version 10.2?

QuickTimeKirk wrote:
QuickTime X seems to be the future development for Apple and it has features not found in version 7.
Likewise, QuickTime Player 7 with the "Pro" license has a lot of features not (yet) available in QuickTime X. Most notable are the extensive export options, movie property editor, & "old school" window style with easy to set in & out timeline points that don't block the image.
But because it is a 32 bit application it is much slower for some things than QT X, most notably playback of HD movie content.
So I use QT 7 for editing & exporting and QT X for playback-only stuff.

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Edu DVD in computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?

Educational DVD added successfully to computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?

Thanks! For whatever bizarre reason for which I have no answer - I sync'd my iPad to my MBP the old fashion way (not iCloud) and the movie showed up just fine. It is Nikon camera 'how to' video. I like to watch them for a better indepth discovery of what the camera can do. The only weird thing about the hard wire sync is that it was placed in a catagory "home movies" which was never there before...actually it showed up in two places "home movies" and TV shows.
So, thanks anyway! Pretty cat!
Mona

How do i install the Motion2 content?

Similar Messages

Maybe you are looking for