How do I install Tiger with a smaller footprint??

I seem to run into a problem with re-installing Tiger on my Mac Mini Core Duo 1.66 with a 60GB drive. It says I only have 39.7GB free so how can I install with a smaller footprint without all of the applications that I don't need??

Hi Dougled, Welcome to Apple's Users Help Users Forums.
With over 50% free, space is not the cause of your problem. You can safely delete, do a custom install without, unneeded printers and foreign languages. Don't mess with Fonts unless you are sure of yourself.
A forum search on "install 10.4." will give you lots of suggestions.
Good Luck, JP

Similar Messages

How do I install Tiger on a Mini

I have a 2009 Mac Mini which came with Leopard, I have upgraded to Snow Leopard and am very unhappy with this OS. Can and if so how do I install Tiger?
I have tried inserting the Tiger install disc and everything freezes up!

Phooey! I was afraid of that.
I'm afraid my wife and I are getting old and set in our ways. The loss of the "Home" folder in he Dock, the new appearance of Safari and Google, and many of the "new" features expanded our learning curve beyond it's limits. My wife is legally blind and uses a 37" display with magnification and voice-over. Navigating a new screen has been very difficult. Besides, I can not find a feature in Leopard or Snow Leopard that makes a change worthwhile.
I may have to dig out her eMac!

How do I install Tiger without DVD drive?

How do I install Tiger without DVD drive on a Powerbook?
My Powerbook had some problems recently, the HDD and the Superdrive where gone. I replaced the HD but can not get Tiger installed here because the DVD drive isn't working. I boot right now from a FW HD. Any Ideas how to install the OS on the internal drive?
Any ideas would be apreciated.

See Option 2 in
<http://docs.info.apple.com/article.html?artnum=304129> or Option 1 in
<http://docs.info.apple.com/article.html?artnum=303028>
It has worked for at least one person:
"Kenichi Watanabe
Posts: 853
Registered: 2-Sep-2003
Re: Using DVD drive in iMac G4 for iMac G3 in Target Disk Mode-->won't read DVD
Posted: 26-Oct-2006 4:37 PM in response to: AJ Nealey
Reply Email
I just tried it between a Power Mac G5 and a PowerBook G3 (Pismo) and it worked. The G5 was Mac in Firewire Target Disk Mode. I started the G5 with the T with no DVD in the drive. I started up the G3, and the G5's hard drive appeared on the G3's desktop. I pushed the eject key (on the G5 keyboard) and the SuperDrive opened. I put in a DVD (the Tiger installation disk) and closed the SuperDrive. The DVD appeared on the G3's desktop. I restarted the G3 with the Option key held down, and the DVD in the G5 appeared as a valid startup choice."

Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...

Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How do I install itunes with Windows 7?

how do I install itunes with Windows 7? I always get a Windows Installer error or administrator error __

Have tried: download but do not install iTunes, then turn off virus protection and firewall, restart computer, login as admin, then run the iTunes insallation. After it installs, restart virus protection and firewall and logout and back in as standard user.
Windows leaves installers running or still resident which conflict with the iTunes installer.

Where can I download Color Finesse and how I can install them with Premier Pro or After Affect ?

I recently purchased master collection 5 DVD version. On DVD box I have three serial numbers: Master collection, Ppro/AE CS4 32 Bit and Color Finesse. I used Master collection serial to activate my product. I am having 64 bit os, so I did not use Ppro/AE CS4 32 Bit serial. My question is about Color Finesse Serial. I searched about it and found it as an Plug-in for Premiere Pro or After Affect. Now where can I download Color Finesse and how I can install them with Premier Pro or After Affect?

This serial is only required for the CS4 version. The CS5 version does not require an extra serial. Both versions are installed automatically with the main programs. Nothing more to do.
Mylenium

I download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.

i download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.
please help me..
thanks

No one here will help you.
You should definitely ask your question in this forum:
http://forums.autodesk.com/t5/AutoCAD-2010/bd-p/360

Trying to install Abode CS4 design standard Upgrade version. How can I install this with out having to install all my previous versions? Thanks Mario

Trying to install Abode CS4 design standard Upgrade version.
How can I install this with out having to install all my previous versions?
Thanks
Mario

You simply install it and input the required serials, including one of a previous product when asked for it.
Download CS4 products
Mylenium

How can i install shockwave with auto updates disabled?

how can i install shockwave with auto updates disabled?
i need to push out shockwave to all our machines and i need to have autoupdates disabled? whats the trick?

I ran with native io enabled and now i need to see how things happen with native io disabled.I am trying to understand the various aspects of the server.
Can you help me? How to set the default queue and application specific queues , and oofcourse socket readers in the case native performance packs are not used?
Please, I will be very grateful.

How can I install Tiger 10.4.11 over Panther 10.3.9

How can I install Tiger 10.4.11 over Panther 10.3.9 ? I tried using a 10.4.2 install disc that I was going to update to 10.4.11, but got message that this would not work on this computer.
Thanks
Bob

Upgrade 10.3 to 10.4 Drop-in Install...
2Z691-5341-A
You must already have Mac OS X 10.3.x Panther installed on your Mac to use this 10.4 Tiger upgrade. Your Mac must also meet the system requirements (detailed below) for Mac OS X 10.4 Tiger.
Compatibility
eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), MacBook Pro, Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD)
http://www.welovemacs.com/m9639za.html

Re-install Tiger with target mode - how to boot to second disk?

I am resurrecting a friend's macbook. In the process of upgrading to Snow Leopard, the DVD drive quit. The install never finished and on boot it was showing the grey and black "please restart your mac" screen.
I used disk utility to repair the disk but it still booted to the error message. I erased the HD and was able to get it to boot using an install on a firewire drive, but I haven't been able to install it on the macbook HD.
I created disk images for each disk and put them on separate partitions on the firewire drive. I was able to install Tiger on her HD all the way to the "insert second disk" message, but don't know how to switch to the other partition where the disk 2 install is.
The original Tiger install is on the two disks that came with her computer. The Snow Leopard is the retail version on one DVD.
Any ideas?
thanks in advance

Unless you can boot your computer from Tiger then you cannot install Tiger via Target Disk Mode onto the other computer. You need to get an external DVD drive for the non-working computer or you can clone the installer DVD to an 8 GB flash drive and boot the computer using the flash drive via OPTION boot.
You can put both DVDs on a 16 GB flash drive that has been partitioned into two volumes.
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the flash drive. Source means the installer DVD. If you wish to put both DVDs on a 16 GB partitioned flash drive, then the destinations will be a volume on the flash drive.

How do I install Tiger on a G3 iMac via Firewire?

I want to install Tiger on to my slot loading (CD drive) iMac, via my DVD drive-equipped Powerbook and Firewire.
But how do I put both computers in Firewire 'target mode' to do this?

Turn them both off, connect a 6-pin FireWire cable between them.
Start up the PowerBook (with the mains adapter plugged in) and allow it to complete.
Insert the installer DVD and restart from the "Install OS X" alias on the DVD, allow to complete restart again.
Start the iMac with the T key held down and you should get moving FW symbols on it's screen and it's hard drive will mount on the PowerBook.
Select the iMac's hard drive from the installer and complete install. The system will then reboot to the new install on the iMac.
Shut down the iMac and the PowerBook, disconnect the cable and reboot both. You may want to hold down the option key on the PowerBook and select it's internal drive as the startup disk. You can do this in system prefs after booting anyway - I've seen this setting get confused on some target installs.
Good luck!

Install Tiger with file sharing?

I have an Emac with a cd drive. I realize I can install Tiger via target disk mode with another Mac with dvd capabilities. I can also see how this might be the preferred method.
Is it acceptable/advisable to install with file sharing?

Is it acceptable/advisable to install with file sharing?
Do you mean NetBoot, ARD, or something else?
http://www.peachpit.com/articles/article.aspx?p=445094
http://docs.info.apple.com/article.html?artnum=306051
(Vague reference).
FWTDM will be fastest, surest, easiest.

How do you install Tiger using target disk mode?

Hi guys,
I have an old Powerbook G4 that seems to have a dead DVD drive, so i am now trying to install Tiger using target disk mode from my Macbook Pro.
I successfully mounted the G4 using target disk mode and the Tiger install DVD but when I double click the install icon, I get an error message saying: "Mac OS X 10.4 cannot be installed on this machine"
Okay, fine but i want to install the OS on the G4. How do I go about selecting the G4 for installation?
Thanks in advance for your help.

Hi Nichola,
Have you tried a search on the support site with the error messages you are receiving? (Maybe your computer doesn't meet the minimum requirements to run Tiger.)
To re-initialize your disk, go into disk utilities, select 'Erase' and follow the instructions. This will erase and format your disk. Hopefully this helps, but I'm not sure if it will solve your kernel panic problem - maybe that's a different issue all together??
Hopefully, you've already backed up your important data, but you should try to use target disk mode to do that if you are still unable to boot up the G4 using Tiger. Good luck - hope this is helpful.

RE-Install Tiger with no disc drive.

Here's my problem:
Old MacBook 1.83 GHz with a disc drive that seems dysfunctional. It actually did not read any CDs or DVDs, and was recently replaced by a third party warranty company. When I received the computer after the warranty work, it read CDs again and allowed me to boot from the MacBook restore disc. I erased my hard drive in anticipation of reinstalling Tiger. During the verification of the install disc, it spit an error message at me saying the disc was dirty or smudged, suggested that I remove it and clean it, and then try again. I did this, and received the same message. The disc looks sparkly clean with no scratches or fingerprints. I then chose to ignore the warning and install anyway. Install eventually failed and asked that I restart the process.
The warranty repair noted that there was a mounting bracket that was broken and it was not covered. THe note explained that the tech was going to try and complete a makeshift repair that allowed the drive to work. I suspect that there is something wrong SOMEWHERE (who knows where) related to the optical drive that is preventing me from successfully reading the disc and installing the software. On another note, the drive will NOT start up from a retail Tiger DVD either. (For reference, I was initially using the 2 discs that shipped with the MacBook for the reinstall.) I called a friend, who is quite knowledgeable on this and recommended I turn the Macbook into a firewire drive (T key at startup) and use a different Mac to read the disc and install the software directly to the now empty MacBook. That did not work either. Once I got to the install screen and allowed to select a volume to install Tiger to, it would not allow me to use the MacBook saying it could not install because it was unable to startup using Mac OS X.
So I'm stuck with a white MacBook brick, unless I can find a way to read the disc properly, or install from some external source. Are there any ways anyone knows I could get OS X onto the MacBook?? Thanks.
I'm usually really good with this kind of stuff, but I'm stumped and excruciatingly frustrated.

I have a very similar problem: white 2006 MacBook with a bad optical drive, had to replace internal hard drive, cannot figure out how to use machine-specific system restore discs to install the OS on the internal. I've been puzzling over this, and here's what I think I've discovered:
Problems being:
* Can't use retail Tiger disc, because it will not install on an Intel MacBook. (From what I've read, there are no standalone retail Tiger discs for Intel machines.)
* Installing via FireWire target mode from on other machines wouldn't work, because other models won't boot from these machine-specific Software Restore discs.
* Can't put disk images of the install discs on an external drive and install from there (at least I don't think that will work).
Potential solutions left, as far as I can tell:
* Create bootable partition on external hard drive. Using Disk Utility on another machine, "Restore" the installation disks to this external HD partition. Boot MacBook from this ext. HD partition, and then install from those images onto internal HD.
* Buy Leopard retail disc, boot other machine with it, and using FW target mode, install on the MacBook internal HD.
* Get an external optical drive or replacement internal drive.
In my situation, all three remaining solutions involve a purchase, which I'd like to avoid (good money after bad). But if any of them work for you, good luck!

How do I install Tiger with a smaller footprint??

Similar Messages

Maybe you are looking for