How do I install to seperate drives?

On a pc with WIN7 64 I installed the CS6 programs I use most (Photoshop, Illustrator, Premiere, AE) to the C drive, a ssd. I had the rest of CS6 installed on a 7200rpm drive (drive D) that failed. I have replaced that secondary drive (D) and I'm attempting to reinstall the portion of programs that were previously there. 'Location' is showing C:\Program Files\Adobe and it is greyed out and cannot be edited. I'm not sure if it is because I didn't get the chance to deauthorize or uninstall those programs before the previous drive failed.
If I try to install to the location shown, I get an error and the installer crashes. If I try to uninstall something from the C drive (Photoshop) I get an error and the (un)installer crashes.
I'll mention that I also changed my controller from 'raid' to 'ahci' because I thought that may have been what corrupted the D drive (even though it was not part of the raid).
I'm contemplating looking into using CC Cleaner, but one of the steps is to uninstall programs which I can't seem to do.
I'm contemplating a reinstall of windows.

Drvnk please try running the CC Cleaner Tool to remove the remaining installed components. You can find details on the use of the CC Cleaner Tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you continue to face difficulties reinstalling Photoshop, Illustrator, Premiere, and After Effects then please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html. These steps will only be effective if the CC Cleaner Tool is able to remove the remaining components of the previous installation.

Similar Messages

Question about Bootcamp XP install on seperate drive on Mac Pro

I installed a seperate drive for boot camp and while I was running 10.4 it appeared in the control panel and at start with option key. After upgrading to 10.5 it no longer appears under in the control panel, however I can still boot from it by using the option key. Does anyone know how (aside from reinstalling XP) that I can get it back in the control panel?

After you installed Leopard did you then boot up on the Windows side and insert the Leopard CD in the drive so that Windows can update the drivers and boot camp? If not then try that and see if boot camp appears in the control panel after that.
Axel F.

How do i install sata hard drive?

ok, i am using right now my sony dvdrw on ide1 as master and ata hard drive on ide2 as master, booting to the hard drive. i am going to install an sata hard drive and use that as the boot drive, the normal ata as a storage drive only. how will i install the sata drive? do i install it to sata 1 and then durring the install of windows xp tell it to hit f6 for third party scsi drivers and then use the intel sata floppy driver disk that came with my board? it's the MSI-6728 board. or is there anything special i need to do in the bios or what?
oh yeah. what connection for power should i use? my powersupply has sata and normal, so should i use the sata power connector? and then what's this about legacy or something in the bios, or am i wrong?

Well first of all, you dont install the Intel S-ATA Driver Disc unless you are going to create a RAID Array....Go into the BIOS and on the "On-Chip IDE Configuration" Page Set the Options like this.........
On-Chip ATA Operate Mode : Legacy
ATA Configuration : P-ATA+S-ATA
Keep S-ATA Enabled : (Greyed Out Yes)
Keep P-ATA Enabled : (Greyed Out Yes)
P-ATA Channel Selection : Both
Combined Mode Operation (At first you have to set this to P-ATA Channel 1, then switch after you Move Windows to S-ATA)
Configure S-ATA As RAID : No
Then you are Going to have to Install the OS on The SATA and Just Move the Files that you want to save from the P-ATA HDD and then Remove the P-ATA Drive from the "Boot Device" List in the BIOS....
You really should List Your Full System Specs. When you POST...Create a "Signature" with your Forum User Control Panel...........Sean REILLY875

Tried installing Illustrator CC but ran out of disk space on primary drive... how can I install on secondary drive?

Tried installing Illustrator CC but ran out of disk space on primary drive... how can I install on secondary drive?

Run_Esperanza how much space do you still have available on your primary drive? It is possible to customize the installation destination within the Creative Cloud Desktop application. You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Please be aware that you will need disk space on the primary drive to installed shared components plus contain the temporary files for installation.

How do I install on a drive other than C

The download manager does not give me an option to install the programs it just installs on the c drive which on my computer is nearly full
so the install is aborted. How can I get the programs to install on my drive D.

Hi,
Try the following:
1) Open Adobe Application Manager thogh shortcut on desktop or start menu on win and Alias under /Applications on mac. Now follow these steps:
2) On the top left hand corner of Adobe Application Manager, your name would be there with a down arrow tip. Click on it.
3) In the drop down menu, click on preferences.
3) In the Install Location, click on folder icon next to it.
4) Choose a folder in D: (Installing directly to root drive is not supported.)
Also, Please note that you still need ~ 1.5 GB hard disk space on the C: for shared components that always go on the boot drive.
Regards,
Anirudh

How do I install a Canon driver?

Hi, I'm new to Mac and I just bought a MacBook Pro with Tiger installed and with the Leopard upgrade disc included. I have a Canon MF4120 connected via USB, downloaded a Canon UFR II Printer Driver v1.50 for Macintosh and it appears in my Downloads folder as o734enx.sit file.
How do I install it? When I try through preferences menu, thid file is greyed and can't be choosen.
Thanks for any help!

The .sit is a stuffit archive. You can get a free version of Stuffit Expander, which will unpack this file.
http://www.stuffit.com/mac/expander/
Or you can download a disk image (dmg) version from here
http://alpha02.c-wss.com/inc/ApplServlet?SV=WWUCA900

How do i install a missing driver?

i have a missing driver im not sure which one and i dont know how to find out.
how do i install this driver (where do i get it from)?
its a 4th gen ipod touch on ios 6.1.4 i think, i tried to restore it to a previous setting as it was freezing and kept crashing all the apps.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates

How do I install a SSD drive - the Bios does not allow changing to AHCI mode

I have a Windows 7, HP ENVY approx 1.5 years old. I want to install an SSD drive, however the BIOS seems to be locked, or does not include options to change the SATA connection to AHCI or RAID.
How does one unlock the BIOS, or change the sata settings to allow an SSD drive to be installed?

Hi:
AHCI is enabled by default on today's HP consumer notebooks.
Nothing can be done to actually see a setting, or change the setting to anything other than AHCI etc.
Paul

How do I Install an .sys driver file on windows 8.1?

I brought a pci-e laptop graphics card adapter of the internet and it requires me to install the graphics card driver software but I firstly have to install a vgapnp.sys driver file but I dont know how?

Hi Willimo,
The main issue is to install the graphic driver software ,right ?
There are two ways to get the driver, automatically update from the windows update or manually download the driver from the manufacturer website and install it from the device manager.
Please refer to the following link :
Download and install drivers
http://windows.microsoft.com/en-hk/windows-8/all-drivers
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I install the jdbc driver for sql server 2005, in sql developer 4.0 ?

Hallo together
I need access to tables in a MS SQL Server 2005 database.
One possibility is the JDBC driver.
How do i install this driver ?
Thank you very much for your postings.

Hi,
This is from the documentation -
Database: Third Party JDBC Drivers
The Third Party JDBC Drivers pane specifies drivers to be used for connections to third-party (non-Oracle) databases, such as IBM DB2, MySQL, Microsoft SQL Server, or Sybase Adaptive Server. (You do not need to add a driver for connections to Microsoft Access databases.) To add a driver, click Add Entry and select the path for the driver:
For Microsoft SQL Server or Sybase Adaptive Server: jtds-1.2.jar, which is included in the jtds-1.2-dist.zip download
To find a specific third-party JDBC driver, see the appropriate website (for example, http://www.mysql.com for the MySQL Connector/J JDBC driver for MySQL, http://jtds.sourceforge.net/ for the jTDS driver for Microsoft SQL Server and Sybase Adaptive Server, or search at http://www.teradata.com/ for the JDBC driver for Teradata). For MySQL, use the MySQL 5.0 driver, not 5.1 or later, with SQL Developer release 1.5.
You must specify a third-party JDBC driver or install a driver using the Check for Updates feature before you can create a database connection to a third-party database of that associated type. (See the tabs for creating connections to third-party databases in the Create/Edit/Select Database Connection dialog box.)
Alternative:
As an alternative to using this preference, you can click Help, then Check for Updates to install the JTDS JDBC Driver for Microsoft SQL Server and the MySQL JDBE Driver as extensions.
Regards,
Mike

How do I install updated Flash drive? It seems to require OSX 12.

How do I install the latest version of Adobe Flash Drive ?? It seems to require a12.1 version and I have a 10.68. How do I expand to a 12.1 ??

First, you have posted in a PPC forum, but your profile shows you have Snow Leopard installed. That requires an Intel Mac.
If you have a PPC then you cannot upgrade Adobe Flash from where you are. If you have an Intel Mac you will have to upgrade to Adobe Flash Player 12.0.0.77.

How do i install the newest driver for audigy 2 z

i downloaded the newest driver and tryed to install it. it says "setup did not detect the set of required compents you have. setup wil now exit" what do i need to install the latest and greatest dri've other than the card itself?

I had the exact same problem updating the drivers for my Audigy 2 Platinum EX, but I think I managed to solve the problem. This was quite awhile ago, but I think I remember how I got it to work.
First of all, which update did you download? The "Digital Rights Management" driver update was the one giving me that problem, and this was after installing the main drivers and programs from my Audigy 2 CD. But, I think the reason why it gives this message is because you need to install one of the other driver updates first, then install this DRM update. Look under the driver details and it says the following:
"<EM>Requirements</EM>:
Microsoft? Windows? XP Service Pack 2 or Windows 2000 Service Pack 4 </LI>
Creative Sound Blaster Audigy 2 or Audigy 2 ZS series internal audio device </LI>
<EM>EAX 4.0 ADVANCED HD Driver Patch Update for Sound Blaster Audigy 2 and Audigy 2 ZS (released on 29 March, 2004) installed, or Sound Blaster Audigy 2 and Audigy 2 ZS Driver Update (released on 29 July, 2004) installed</EM>."</LI>
Strangely enough, it appears this update requires you install an older driver update first (EAX4DRV_AUDIGY2__84_50.exe) then afterwards try running the Digital Rights Management update.
I think this is right, but I'm not 00% sure.

Lost-how do you install x-fi driver for arch 32bit

k, i have tried installing the linux x-fi driver for my sound card... but im sorta having trouble installing the driver.
i sorta find the instructions arch wiki to install the driver confusing... how do you install it? im really lost, and im very new to linux.... but i do got computer smarts...

The wiki page (http://wiki.archlinux.org/index.php/HCL/Sound_Cards) doesn't cover installing drivers for creative soundcards as such. They should be installed automatically. However it doesn't mention the x-fi at all. I am not sure what the procedure is for your card. Are you sure it hasn't been autodetected? Also you should read this article if you haven't already. (http://wiki.archlinux.org/index.php/ALSA)

How do I install a printer driver, without the printer?

You see, I don't want to print anything.
I am using some CAD software and I use the “create PDF” function of the printer dialogue to make a PDF. The problem is my drawing is quite large so I need to install a printer driver for a printer that handles larger paper (Epson 1280). I have the driver, but it refuses to install without the printer being attached to it.

I didn't post one.

HT4718 How do I install the seperate system recovery partition after installing OSX on an external drive?

My Mac Mini (2011 - Mountain Lion) died on me and I'm trying to get Internet Recovery (or ANY recovery) to work. I have done the hold down D on boot hardware test and the extensive test and it says all is well. However Internet Recovery downloads (or appears to) and then I just get a never-ending spinning wheel and Apple logo.
I just installed Lion 10.7 from my older Mini that can't run Mountain Lion onto the newer Mini's hard drive as an external disk. How can I get the recovery partition added to that disk too?

Google recovery disk assistant. Hopefully that'll be what you need.

How do I install to seperate drives?

Similar Messages

Maybe you are looking for