How do i install windows 8 on a late 2012 mac pro?, how do i install windows 8 on a late 2012 mac pro?

how do i install windows 8 on a late 2012 mac pro?

Follow the directions here http://www.apple.com/support/bootcamp/

Similar Messages

Late 2012 Mac mini upgrade ssd - also install parallels 8 and windows 7

Late 2012 Mac mini (16gb memory) SSD install - samsung 840 pro 512 gb. I am looking to install this new SSD as possibly a dual drive setup almong with the stock HDD 500gb in order to: make the system faster (with more storage etc.), possibly use the stock drive as a backup drive and I also want to run parallels 8 with windows 7.
I have ordered the data doubler kit from Owc and am wondering exactly how to setup properly. Can I simply install new drive in the upper bay (and move stock drive to lower bay)? Then migrate the data from the stock drive then after that's complete run the setup for parallels? I am also confused as far as using trim enabler or not? I was also wondering how much space/memory is recommended for windows 7 partition?
-Thanks in advance for your suggestions

NOTE: A small number of 2012 units were shipped with the drive mounted in the upper drive bay rather than the more typical lower bay shown in this video. If you have a 2012 or later model, you will want to determine the configuration of your Mac mini's drives prior to ordering. To do this, open Applications/Utilities/Disk Utility.app and click on the grey drive icon at the left-edge of the window. If you see "Lower" after the "Connection ID" at the bottom-left corner of the window, you may proceed using the standard installation instructions. If you see "Upper" then you have a special configuration which will need additional components, and you will need to also refer to the Addendum video.
http://eshop.macsales.com/item/OWC/DIYIMM11D2/
Some users have reported problems with an SSD being the boot drive in the upper bay. They have not reported problems with a HD boot from either bay To avoid the problem I would move the HD (if it is in the lower bay) to the upper bay and install the SSD in the lower bay.
I allocated 64 GB for Win 7 in Parallels abd 4 GB Of 16 installed). You can change them later after you install so it is not that importent what you specify initially.
For TRIM see:
https://discussions.apple.com/message/23819753#23819753
http://www.mactrast.com/2013/11/enable-trim-ssds-os-x-mavericks/

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded to LION. And update the EFI, I would like to replace the Snow Leopard, EFI can not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

HT1199 My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

You already have the software installed that you need if you have 10.8.2.
If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
Power up the Express for a full minute
Hold in the reset button on the Express for 7-8 seconds and release
Allow a full minute for the Express to restart
Click the AirPort icon at the top of the Mac's screen
Look for a heading of New AirPort Base Station
Just below that, click on AirPort Express
What happens?

HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? A lot of my preferre

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the newer CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? If so, where are they in the directory? A lot of my preferred fonts show in the Windows directory but not in Photoshop, which does not display them within the program. Please help. If I get free fonts (NOT CC fonts) from elsewhere, where do I put them for Photoshop[ CS6 to use them? Thanks.

All versions of Photoshop get their fonts from your OS. Just install any missing font wherever Windows keeps fonts.
I don't do windows myself.

How can i remove a hybrid mbr from my system drive so that Efi booted windows will install.

Hi,
i have just clean installed OSX lion on a freshly wiped drive in my macbook pro, using a bootable lion installer usb i used disk utility to partition my drive into a mac and a windows partition under the GPT/GUID partition scheme, i then proceeded to install lion onto the mac partition, and completed the set up, All Good...
so i plug in my Windows 8 EFI Boot USB stick (Notice, EFI boot here, NOT BIOS EMULATION BOOT), shutdown and power on the mac and proceed to the boot picker by holding option, So far so good, the usb key is recognised and the system boots into the Windows Setup in EFI mode, Enter product key, accept terms and so on, Now i select my Windows partition and windows Says That it cant install to Partition 4 (EFI Partiton, OSX Lion, Lion recovery, Windows), It says that it can only install to a GPT / GUID based disk as expected...
Why is there a protective MBR on my drive when i didnt add one, and i have not even touched bootcamp assistant...
How can i remove this Protective MBR from my drive so that my disk is PURE GPT so windows can install?
hours of googling has turned up nothing...
System:
Macbook Pro 13 inch Mid 2009
Mac os: OSX Lion
Version of windows trying to install: Windows 8 Release Preview 64 bit in EFI Mode

Alexander, I would like to apologize for the TERRIBLE answers you have been given so far. I too had this question, and so here is what my thoughts are, as maybe they might provide insight in leading you towards the answer.
I am a *nix user in general, and thus own a mac and a thinkpad. In fact I just got my thinkpad not too long ago. As such, I transfered my faster hard drive to my faster computer, which made logcal sense to me. Ergo, I moved my Mac drive to my lenovo. On this drive I have a hybrid mbr which is no longer needed. So my thoughts are this:
From what I gather, the UEFI standard indicates that there is to be a protective MBR on all GPT systems. This is so that when you use programs that are not GPT aware, they will see a presumably "full" drive and not think that they have the right to destroy your existing data in what it thinks is free space. For instance, fdisk or other MBR only partitioning systems. Thus, if your system has only a MBR with a single EE partition, it would be my guess that it was in fact not put there by installing Windows, but rather for the protection of your system.
If you are in my situation, where you do indeed have a hybrid MBR with written out partitions, it would be my guess that the only way to rid yourself of it is to do it manually. The way I would recommend, is using gdisk (gpt fdisk). It is command line only, but the syntax is pretty easy:
$ sudo gdisk /dev/disk0
Assuming you are using your mac partition and your primary hdd is disk0. That will put you into an interactive session of gdisk. Enter "?" for command options. What you need is the "recovery and transformation" section which is the "r" I think. From there I would say you probably want to create a new hybrid mbr (you will be using this to delete it). When it asks you for the partitions you would like to include, just hit enter. It should then ask you if you would like to create a protective entry for the remainder of the empty space. This is what you want so tell it to do that. After you are done, "w" will write and exit. You may want to first use the "p" to print and ensure that you have what you want. You can proabably check your work by using fdisk as so:
$ sudo fdisk -l /dev/disk0
I hope this helps you, and if you find that there is a better way, I hope you might enlighten this thread.
Cheers!
PS The command examples, the $ is to indicate it is a bash/shell command as a non-root user, do not include it in the command.

I just installed Firefox on a new HP 600-1120 with Windows 7 and it is only running in "safe" mode. Why? How do I get it to run in "regular" mode? How does "safe" mode differ?

I just installed Firefox on a new HP 600-1120 with Windows 7 and it is only running in "safe" mode. Why? How do I get it to run in "regular" mode? How does "safe" mode differ?

> So now my question is, how can i fix this problem?
Use the Toshiba recovery disk or the Toshiba HDD recovery option.
If you dont have the Toshiba Recovery disk try the HDD recovery:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
This works only if the recovery image files from Toshiba are still on the HDD:
If you installed the system using another disk as Toshiba recovery disk, this recovery option will not work.

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I have CS4 on a PC. I have bought a new MAC. How do I install my CS4 on the MAC- it seems this is a windows license.

I have CS4 on a PC. I have bought a new MAC. How do I install my CS4 on the MAC- it seems this is a windows license.

The license is only good for Windows and is too old to qualify for a platform swap. The only option you might have is to install Windows emulation software on the Mac and install CS4 thru that.

I accidentally erased mac os 10.6 while installing windows 7 on macbook air, how do I install back to mac?, I accidentally erased mac os 10.6 while installing windows 7 on macbook air, how do I install back to mac?

I accidentally erased mac os 10.6 while installing windows 7 on macbook air, how do I install back to mac?, I accidentally erased mac os 10.6 while installing windows 7 on macbook air, how do I install back to mac?

Use the Flash Drive that came with your computer it has Snow Leopard installed on it. If you lost it or cannot find it then call Apple and they will replace it for you, I don't know how much they will charge.
BTW when installing MS Windows please follow the directions whether you are using Boot Camp or a vitualialization solution (Parallels, Fusion, etc.) had you done this you would not have had any issues.

How can I install Creative Cloud Desktop on a MacBook Pro running Parallels Desktop and Windows 8.1?

Does anyone have any help for installing Creative Cloud on a MacBook Pro running Parallels Desktop and Windows 8.1? I downloaded the app, double-clicked it, said yes to allowing it to change my system, and received a notice of installation failure with Error code 1000. Any help much appreciated.

RogueResearcher please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to install the Creative Cloud Desktop application. If you continue to experience Error Code 1000 can you please post a screen shot of the error? Please see FAQ: How do I capture and post a screen shot or video? for information on how to post an image.

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

How do I install a purchased adobe acrobat pro XL cd to my windows 7 desktop?

How do I install a purchased adobe acrobat pro XL cd to my windows 7 desktop?

Hi Hannah Maddox,
Please let us know that what kind of trouble are you facing in installing Adobe Acrobat software?
Regards,
Rahul Tyagi

How do i install windows 8 on a late 2012 mac pro?, how do i install windows 8 on a late 2012 mac pro?

Similar Messages

Maybe you are looking for