How do i install windows 8 on my macbook air

and erase osx
i lke the perfrom of windows 8
how would i do this

It sounds like you have no interest in using the MacOS and prefer to use WIndows 8. If that's correct you'll need to run BootCamp (it is in the Utilities folder) and create the largest possible partition for Windows. You do not want to erase OS X because you'll need it to update BootCamp and Apple's drivers. Since Apple uses some proprietary components (including the trackpad) you can get these drivers only from Apple and only thru BootCamp.
Once you've run BootCamp look at the instructions for installing Windows. It is quite straightforward.

Similar Messages

  • How can I install Windows 7 on my Macbook air

    I recent purchased a Macbook air mid-2011 and I want to install a copy of Windows 7 by Boot Camp. But I did not know why I cannot reboot the Windows after the distribution completed (I had a Sumsung mobile DVD-ROM which works well when I use it to install apps). With my old Macbook 2010, of course, which had a DVD-ROM inside, it will automatically reboot into Windows installation . According to the Boot Camp, the 1st step is to make a ISO-image of Windows 7. However, I did not know how to do it. Please help me.
    Thanks!
    wm3625

    As this is not a Macbook Air specific question, and is entirely a Bootcamp usage query, the best place to post this is in the BootCamp forum of this community.
    https://discussions.apple.com/community/windows_software/boot_camp
    i only post this because I know that you are likely to get a much faster array of repsonses that will resolve all your questions if you post in the forum most suitable.

  • How do I install windows from USB on Macbook pro 3,1

    How do I install windows from USB on Macbook pro 3,1 ?
    My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
    - My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
    I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
    Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
    Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
    After rEFIt I booted and then I got this error:
    Starting bootmgr.efi
    Error: Unsupported while loading bootmgr.efi
    I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
    Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
    Point: Nothing is wrong with the windows software, and windows runs fine.
    I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
    Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
    Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
    rEFIt - Booting Legacy OS
    Starting legacy loader
    Using load option ´USB´
    Error: Not found returned from legacy loader
    Error: Not found from LocateDevicePath
    (x 9 times)
    Error: Load Error while (re)opening our installation volume
    The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
    (Hey Apple please send out a updated firmware that fix this issue?!)
    So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ?  Or just run windows on the mac and forget about mac software ? What a stupid solution...

    There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
    This is 5 page thread, so a little more 'meat' to it:
    https://discussions.apple.com/thread/3410900?start=60&tstart=0
    And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
    What you have here seems to be everything and everyone is excluded unless there is a  mac-model device ID string that specifies yes.  An unnecessary hurdle.

  • How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

    How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
    My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
         -I have a flashdrive with win7 on it.
         -I mounted the ISO of win7 with toast for bootcamp to do its thing.

    Good luck.
    Consider this a bump so that hopefully someone with better news spots your thread.
    Allan

  • How can i install windows games in my macbook pro

    I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

    As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
    As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

  • I am trying to install windows 8 at my macbook air boot camp

    I am trying to install windows 8 at my macbook air boot camp but Boot Camp Assistant i showing an error that the disk cannot be portioned because some files cannot be moved. Back up the disc and use disk utility to format it was a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant Again.
    I had already installed teh first time Windows on my MacBook Air and Mac Book Pro. Actually I had more issues to install on the pro than Air.
    But my Macbook Air had an issue on November 2013, 3 weeks after buying it and Apple gave me a new MacBook Air but they only transferred the information on my mac and the windows partion was lost according to them, they could copy it in to my new MacBook Air. Now that I am trying to install my windows I can not access to the aprtion section and get the error message from above.
    What can I do to to install it? I am using a 32GB USB and OEM Windows 8 at USB External Drive. The same I used before. I dont know understand what changed if I did it before?
    Please advise..

    I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
    open disk utility, confirm that you only have 1 partition (mac journaled)
    restart and PRAM reset
    open disk utility and repair permissions twice
    restart boot camp assistant
    Does it work?
    If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

  • How can i install logic pro on my macbook air

    How can i install logic pro on my macbook air?

    Welcome to the Apple Support Communities
    If you bought it in discs, buy the USB SuperDrive or use Remote Disc

  • How do i install more memory in my macbook air? it only has 4GB

    How can i install more memory in my macbook air? it has 4GB only and it keeps telling me my start up disk is full.

    Welcome to the Apple Support Communities
    In the case of the MacBook Pro with Retina display and the MacBook Air, memory is soldered into the logic board, so you can't add more memory after buying the MacBook.
    However, memory isn't your problem. One thing is the memory and another thing is the hard drive, and you are running out of space in the hard drive, not in memory.
    To fix this, just delete files that you don't need, or move them to an external drive, in order to make free space on your MacBook

  • How do I install Front Row for my MacBook Air with Lion OS

    I need to know how to simply install Front Row onto my MacBook Air with Lion OX 10.7.4. Please help.

    Front Row is indeed "gone." There are alternatives, but first look at these links:
    How to Install Front Row on Mac OS X Lion 10.7
    Front Row Enabler for Lion - Mac-Hatter Consulting, LLC.
    Get Front Row for Mac OS X 10.7 Lion
    Plex - A Complete Media Solution

  • I would like to know how do I install the brazilian keyboard into macbook air, keyboard with accents (Portuguese Language), I tried so many times how to put into it (Macbook Air). So, thanks for now! I'm waiting for it.

    I would like to know how do I install the brazilian keyboard into macbook air, keyboard with accents (Portuguese Language), I tried so many times how to put into it (Macbook Air). So, thanks for now! I'm waiting for it.

    After you go to system preferences/keyboard/input sources as suggested by sberman, click on the + button and scroll down to Portuguese and select that.  Over at the right you will see the choices Brazilian, Brazilian abnt, Portuguese.  You might want to add all three to see which you like best.
    The "Brazilian" layout is pretty useless.  It is identical to the US layout and the only way to make accents is via the option key shortcuts:  option + n, then o gives you õ.
    The Brazilian abnt and Portuguese layouts have dead keys for adding accents over at the right edge of the keyboard.  But these may not match what is printed on your keys.
    You may prefer to stay with the US layout.  On that you can get accented letters by just holding down the base letter and selecting what you want from the popup menu that appears.  Or you can use the option key shortcuts.
    Another option is the layout called US International PC, which has accent deadkeys on ~, ', etc.
    Which ever layout you want to use, you must select it in the "flag" menu at the top right of the screen.
    To see which key does what for any layout, use the Keyboard Viewer:
    http://support.apple.com/kb/PH13746

  • HT5628 why cant i install windows 8 on a macbook air 13-inch, Late 2010?

    why cant i install windows 8 on a macbook air 13-inch, Late 2010?

    Welcome to the Apple Support Communities
    You can install Windows 8 on your computer because it can run Windows 8, but you can't install the Windows support software that makes Windows run properly, so probably things like the Wi-Fi card, the sound and the graphic card may not work without these drivers.
    That's just an Apple restriction. Apple has decided to give Windows 8 support to the most recent Macs, leaving old Macs with Windows 7. Unfortunately, to run Windows 8 properly, the only option is to install it on a virtual machine. Apart from that, if you want to install Windows 7 with Boot Camp, you can do it

  • How can I install my CS5 onto my MacBook Air?

    How can I install my CS5 onto my MacBook Air? I have my serial number, but I can't find anywhere to download the program on the Adobe site. The physical CDs are useless w/MacBook Air.
    Thanks!
    Emily

    The physical disks are OK with MacBook Air if you buy a cheap external DVD drive and connect via USB. That's how I install DVD software on my MacBook Air.
    That said, you can download the software from http://prodesigntools.com/adobe-cs5-direct-download-links.html
    Follow the Very Important Instructions on that page first otherwise the links won't work.

  • How do i remove window icons on my macbook air desktop?

    How do I remove window icons on my macbook air desktop? (specifically when you use the 4 finger scroll to see all the windows you have open...)

    Ok thanks. Actually I figured it out. I was trying to remove the icons (windows) I had open when you use 4 fingers to see all the desktops and windows you have open. I just had to click on the window then press esc, then X and it deleted it. Thanks anyways

  • HT5628 how do I install windows on retina display macbook pro

    How do I install Windows on my macbook pro retina display so that I can play an external cd

    I inserted a flashdrive and followed the bootcamp directions.  I then thought that I could purchase windows online and download that program.  When I went to buy windows online, it was $199.00 so I started searching further for an alternative.  That led me to blogs regarding parallels, fusion and Virtualbox info.   Which led me to more confusion after searching the apple store to buy paralles.  I then found out that I needed a windows disc or something to download to actually get windows.     Then I quit.  
    I'm not sure why this particular CD wont play.  Some of my music CDs do play so I know the device works. 
    So, here is the part that will download and states the requirements.....
    Silvestri: Companion CD for Saunders Comprehensive Review for the NCLEX-RN Examination, 5th Edition.
    This CD is designed to run on both PC and Macintosh.
    Your computer should meet the following minimum requirements:
    Windows®
    Windows XP SP2,  Vista, or 32-bit  Windows 7 operating system (64-bit versions are not currently supported. However, the application will most likely work on 64-bit version. Run As Administrator may be required.)
    Intel Pentium 4 processor (or equivalent x86 chipset) / 1 GHz or greater
    225 MB available hard drive space
    512 MB RAM (256 MB or lower may be sluggish)
    Minimum 1024 x 768 pixels screen resolution
    16-Bit color
    16X or faster CD-ROM drive / 8X or faster DVD-ROM
    Instructions
    If your system does not support Auto-run, double-click “setup.exe” from My Computer > CD/DVD-ROM to begin.
    Macintosh®
    MAC OS 10.4.x or higher operating system
    Intel-based processor or PowerPC G4/G5 (867 MHz or higher)
    225 MB available hard drive space
    512 MB RAM (256 MB or lower may be sluggish)
    Minimum 1024 x 768 pixels screen resolution
    16-Bit color
    16X or faster CD-ROM drive / 8X or faster DVD-ROM
    Instructions
    Macintosh
    A CD icon labeled "SilvestriRN5e" will appear on the screen once inserted. If it doesn't auto-open, double-click it. Double-click " SilvestriRN5e.dmg" to mount the installer volume. If it doesn't auto-open, double-click it. Drag or copy " SilvestriRN5e.app" to your applications folder, or wherever desired on your hard drive.
    TECHNICAL SUPPORT
    Technical support for this product is available between 7:30 AM and 7 PM CST, Monday through Friday. Before calling, make sure that your computer meets the minimum system requirements to run this software. Inside the United States, call (800) 692-9010. Outside the

  • How can I install windows XP in my Macbook using bootcamp?

    I`ve just bought my mackbook Pro and I`m student of engineering. I`d like to install windows XP in my macbook to use some especifics softwares! But when I use bootcamp, Mac just gives me the option to install Windows 7? How can I install Windows XP? Thanks at all!

    Bootcamp 4 which ships with Lion doesn't support XP or Vista, only 7.  Try using Parallels or VMWare instead.

Maybe you are looking for