How do I install windows and bootcamp on my macbook Air

Hi
I need to install Windows and Bootcamp on my macbook Air, due to a software tool a customer needs that only runs on windows.
The initial instructions say I cannot do this with a remote DvDplayer,
Who has experienced this?
Chris

http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

Similar Messages

How do I install Windows 7 on my new MacBook Air?

Hey everyone, I just purchased a MacBook Air (4GB ram & 256 SSD) with Lion OS... I have been a PC user for forever & a day... I am going to be installing Windows 7 on it because Wellview is not a mac friendly program aswell as other programs. I am trying to learn the difference between Parallels, Boot Camp, etc... I understand a partition & how it works on a PC & have been reading forums in Mac rumours to try & figure it out on this system... But, what would be the easiest way to install W7? I will have to download Windows 7 OS & it sounds like Parallel but it looks like this MBA has Boot Camp already installed on it. Also, would it be better to have the thunderbolt connected to a hard drive & keep everything off of the the MBA HD? Is there a way to upgrade the RAM in the MBA? I know, that's a lot of questions... But, I would rather ask them here & figure it out rather than asking someone on the phone... Yes, I am male... LOL... One other question I have is how will the touch pad work in windows, how do you hit the typically right mouse button when this laptop doesn't even have one? I know you use the different fingers for different actions as I have been experimenting with... Just wondering on that one... I'm sure it works somehow... LOL...

OMG Morgan, you are an inquisitor .
But I will try and answer all your questions:
1+2: it depends on your demands: if you use both OS's often, and have a "normal" HDD you want to avoid restarting all the time and use a Virtualizer. With a MBA restarting is superquick. If you use Mac apps at the same time with Windows you better use the Virtualizer. But if you are having "bootcam windows" and decide to install a virtualizer later, this Virtualizer can make the VM of the bootcamp partition...
3: you can not install Windows without a disk.
4. The X stands for 10: Snow Leopard is 10.6... Leopard is 10.5... Lion is 10.7... They are all OSX. Befrore that there was OS9.
5. The Bootcamp install is very good guided: Bootcamp makes the partition on your SSD and after that it will ask for the W7 install disk (in case of a CD you need the Apple superdrive). This partition will be about 60GB for W7.
6. If you use Parallels, there is Kaspersky antivirus included (half a year), it will only install when you say yes on the install question (say no for W7) but as I said before: only use an antivirus in W7 and NOT in OSX, if you do not pay very good attention Parallels will install it also in OSX. Better use Avast, AVG, they are free, simple, fast, and good. NEVER use norton. But you can use the one you know form your PC life....
7. delete button: same as backspace, if you hold the "Fn" key at the same time it deletes forward.
8. When a new OS comes available (this not the same as update), make sure before you install it, that all your apps have compatibilty: you can read a lot of posts here of people who did not check before upgrading to Lion!
(same goes for Windows 8, when it comes).
No I don't know where W7 is the cheapest.
9. 32-bit or 64 bit: both are good, it does not make much difference either will run a 32 bit app. I use XP which is 32 bit on a 64-bit Mac OSX, and 64-bit W7. Thus: it depends what you want to run. My old Bankapps are all 32-bit and will not run on W7.
I hope I informed you enough to make your decisions now.
have fun.

How do I install windows using BootCamp without cd drive fot the new MBP?

I need some softwares for my work (modelsim, altera, ltspices etc) but some of them only supports windows.
New MBP doesnt seem to have a cd driver.
How do I install windows using bootcamp without cd drivers?

You can use a USB thumbdrive to do this, assuming you have access to a windows machine to format the usb stick.
I installed Win7 on my MB Air (2011), which of course lacks a DVD drive altogether, using this technique.
Basically, you download a tool called rEFIt to your macbook. ( http://sourceforge.net/projects/refit/files/rEFIt/0.14/rEFIt-0.14.dmg/download ) When this is installed, it gives you a boot selector menu when you boot the Macbook ('Do you want to boot to MacOS or to the USB drive?')
Then you download and run an Apple tool called Boot Camp Assistant, which allows you to partition your HD for the two operating systems to share; it also pulls down all the windows drivers you need.
Then prep the USB thumbdrive on a windows machine to be a Win7 installer disk. You'll want a drive in the 4gb+ range I think. You have to set up the thumbdrive to be bootable (lots of tools for that available), and then copy all the windows installation files over to it.
Put the thumbdrive in the macbook and boot holding down the option key.
Choose the rEFIt icon on boot, then choose to boot from the thumbdrive, then format your new windows partition to something Win7 can handle, and install windows.
On my machine I followed a slightly more involved process and wiped out MacOS entirely. I would have kept it on a small partition if I'd had a bigger hard drive.
If you need super detailed instructions, CNET has some here:
http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/
Tech-Recipes has some similar instructions here:
http://www.tech-recipes.com/rx/9136/macbook-air-install-windows-7-with-boot-camp -without-an-external-dvd-drive/
If you have any issues after trying this, ping me and I may have solved them when I went through the same process.

How do i install internet explorer 11 to my macbook air

How do i install internet explorer 11 to my macbook air

Internet Explorer is for Windows only and could be considered to be malware
Therefore the only options to do this are -
Install Windows in to a virtual machine using either VMware Fusion, Parallels, or VirtualBox, and then you can run Internet Explorer as normal
Or, install Internet Explorer via CodeWeavers "CrossOver Mac" - see http://www.codeweavers.com/compatibility/browse/name/?app_id=12714 however while older versions of Internet Explorer are working newer versions look like they don't work with this method.

How can I get Windows Internet explorer on my MacBook air?

I have several websites that I need to use for my new job that have not been tested for Mac. I don't want to have to buy a PC laptop, so I was wondering if there is a tried and true way to get windows Internet explorer on my MacBook air.

Or install Parallels 7 and then you can run IE just like any other app from within OS X itself. That costs around $50 plus the Windows license though.
Personally I have created an IE9 RDP (remote) App on my terminal server at work and just run that. Looks like it is running on my Mac natively.

Questions about partioning the drive, installing Windows, and bootcamp

I have a 2.0ghz Intel Core 2 Duo model Mac Mini model MB139LL/A, I upgraded the ram to 4GB and the HDD to 500GB.
I just partitioned off about 100 gigs of my 500 gig drive in my Mac Mini for Windows 7.
Before installing, I just want to know, is it safe if when in the Windows 7 installer, I delete the FAT32 partition that Boot Camp made and tell the Win7 installer to just partition the now unpartitioned space however it feels like? Or would this cause problems with MACOS or the Mac bootloader detecting the Windows installation if I did this (please note that I am ONLY touching the FAT32 Windows partition that bootcamp made, NOT any other partition)? Windows 7 sometimes creates a 100meg boot partition for features like bitlocker and other options, but it will not do this if you are installing on an existing partition, which is why I asked.
Also, is it possible (without hacking or third party boot software) to have three operating systems installed on the Mac Mini instead of two or no? Would bootcamp support booting more than two operating systems?
Finally, is there any way to read the NTFS Windows partition in Snow Leopard or the HFS+ Snow Leopard partition in Windows 7?

You need to tell Windows to format that FAT32 partition created by Bootcamp to NTFS. Don't delete it or create a new one. The reason is that OS X uses a partitioning layout called GPT, while Windows and most other OS's use MBR. Therefore, Bootcamp alleviates that by creating a special MBR partition.
Second, the only way to triple-boot OS X with two or more non-OS X operating systems (you can multi-boot with as many OS X installations as you want) is to use a third party loader, such as rEFIt.
Third, by default, OS X can only read the NTFS bootcamp partition, and Windows can only read the HFS+ OS X partition. You can install third party software to get around that, such as MacDrive for Windows, or NTFS-3g for OS X. Snow Leopard also has an experimental NTFS read/write driver, but it's disabled, and for good reason, for it is quite crash-prone.

HELP! My Mac won`t wake up after installing Windows and Bootcamp

Hello,
I posted a message in another discussion earlier but I guess it is best to open a new discussion.
I upgraded to mac Leopard today (on a new 24 inch imac) and installed bootcamp.
In bootcamp I chose the 32GB FAT partition for windows, and everything worked fine until I had to choose the partition to install windows, where I could only choose a 115 GB (or so) partition. Fearing I'd mess up my Mac partition, I quit the windows installer (following the instructions in the installer) and since this, my mac wakes up with the mac sound and the screen remains blank. No matter what keys I push durin power up, or the installation CDs I insert, my Mac won't wake up!
Does anyone know what to do?
Is there a way to recover the master boot (or whatever it is called in mac?)
Thanks
Thanks!

I have had the same issue...
I just purchased my 20" iMac less than one week ago. I tried running boot camp and got an was not able to see my bootcamp partition in the windows installer. I quit the installer and now my computer launches into the white screen and will not progress further. I have tried various methods of recovery but to no avail. Here is a list:
_Using the iMac OSX Leopard installer disk_
• insert disk into iMac slot and boot pressing "c" - result = white screen
• insert disk into iMac slot and boot pressing "x" - result = white screen
• insert disk into iMac slot and boot pressing "option' - result = white screen w/ mouse pointer
• insert disk into Power Mac G4 in target mode and boot pressing "c" - result = white screen
• insert disk into Power Mac G4 in target mode and boot pressing "x" - result = white screen
• insert disk into Power Mac G4 in target mode and boot pressing "option' - result = white screen w/ mouse pointer
• trying to boot Intel iMac in Target mode pressing "t" - result = white screen
_Using General Purpose Leopard Disk_
Same results as above.
My question is there any way to get this system to recognize a boot disk or see any boot partition outside itself?
All of the above methods were done with the power cable being unplugged and plugged back in and being all sorts of careful. I have had the CAT-5 cable out of the system during whole process.
Is there some triple secret trick that I don't know about?
Note - I have worked on and serviced video and graphics systems on Mac 8200's on up (and others) for over 12 years. So I am not a babe in the woods. My guess here is that Boot Camp is doing something to the firmware and it is toast.
Message was edited by: Martin Mcgowan

How do you install windows 8.1 on a macbook pro? And do i buy the windows 8.1 package from windows or is there a specific one designed for a mac?

I have ordered a new macbook retina pro with 256gb hardrive, i7 processor and 16gb ram. It still hasnt arrived become im ordering it overseas however when it arrives i want to download windows 8.1 on it and i need some help please!

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How Do I Install Windows 7 to Early 2013 Macbook Pro?

I need to own a windows pc or at least have windows 7 environment to work in for some college courses. I own Windows 7 Pro. Is there a way for me to install this onto my current my Macbook Pro Retina Early 2013 Release?
If So, How do I do this?
Can it be done to an extrernal 1TB Hard Drive that I can plug in and use only as needed?
Will I be able to install Microsoft Office 2010 to only the Windows SIde?
How do I do this?
Thanks Ahead of time.

Limbic_Pastry wrote:
I need to own a windows pc or at least have windows 7 environment to work in for some college courses. I own Windows 7 Pro. Is there a way for me to install this onto my current my Macbook Pro Retina Early 2013 Release? ...
While it's possible to run Windows 7 or the Mac OS using Bootcamp, you can run Windows 7 and the Mac OS at the same time by creating a virtual machine (VM) using VMware Fusion, Parallels, or Virtual Box. One advantage of a virtual machine is that you can put the VM file on an external drive so that the VM file size isn't limited to available space on your internal. Another is that you can back up that file and/or create snapshots of the state of Windows at any point in time and revert to that state in seconds if something (e.g., a virus infection) goes terribly wrong. I have such a setup running in a rMBP early 2013 myself and it's very fast.

How to install windows 8 on brand new macbook air

Has anyone installed windows 8 via bootcamp on a new macbook air? I do not have a previous windows 7 on my mac either?

Here is says (point 4) that it doesn't work.
http://support.apple.com/kb/ht4818#3.1
And here a video, where they seem to get it working
http://www.youtube.com/watch?v=3lNOrfAWEhg

How can I install windows 8.1 on my macbook pro late 2013?

I bought a new Macbook pro 15" late 2013 and i want to install windows 8.1 on it. I tried several times but it always says me that windows cannot be installed on the partition that i made with bootcamp assistant.
Thank you for your answers
Alessandro

You can install Windows 8.1 using Boot Camp Assistant or by using a virtual machine like Parallels, Fusion, or VirtualBox.
The Boot Camp Guides are located here: https://www.apple.com/support/bootcamp/
The Boot Camp Discussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp
Help for Parallels, Fusion, and VirtualBox can be found at their respective sites.

How do I install Windows Vista on my New Macbook Pro

I need to use DOS for work to fill out reports for my organization. I have the newest 15.4 macbook pro with intel core 2 duo. I want to know the exact steps to install windows vista on my computer?? please help me.

It depends on what you want to use Windows for, are you going to work mainly in Windows or OSX? Will you need to cross between the two and if so will restarting your computer be a pain?
I use Paralles, a copy of that is around $75 as far as I can remember.
Personally I had a copy of Windows XP so that was the first Windows OS I used with Paralles, then Vista came out so I though I would get a copy as it was supposed to be * the * Windows OS, when I installed Vista I was so dissapointed with it. I would go as far as say it is one of the ugliest OS's I have seen, I actually prefer XP, it's like the old space programs when you look at the sets, they made an effort but you can see the budget was low, it looks like a really poor effort at copying OSX but they didn't spend the money on doing it right.
Anyway, I just use XP so Vista for me was a waste of money. XP works faster and is more intuitive than Vista 'If Windows can be intuative that is'.
I also read out there that security in Vista isn't what it is cracked up to be.
Hope this helps.

How can I install Windows 7 by USB? MacBook late 2008 10.6.8 Boot Camp 3.0.4

Someone please help...
I have tried software update and no luck. I think my Boot Camp on Mac 3.0.4 is not showing me the right option on creating a USB installation. It asks me to load Windows 7 CD when I don't have it, I bought it online... Every download I tried from Apple is .exe and I am losing hope on this one...

You can only install Windows from a USB with one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and later).
- iMac (Late 2012).
- MacBook Air.
If you bought Windows in Internet and you got it in a ISO image, you can burn it into a DVD. Simply double-click the ISO image, open Disk Utility, right-click the ISO image in the sidebar and burn it

HT5634 HOW WOULD I DOWNLOAD WINDOWS 7 BCA FOR MY MACBOOK AIR. I HAVE PARALLELS 7 FOR MAC AND WANT TO RUN QUICKEN FOR WINDOWS

Which systems of Windows 7 do I download for my MacBook Air? I have OS 10.8,5 I installed Parallels 7 for Mac and would like to run Quicken for Windows.

You can run Windows 7 in Parallels. You do not need to run Boot Camp Assistant to install Windows if using Parallels. Visit the Parallels site for instructions regarding running Windows in Parallels.

Installing Windows 7 from USB flash (Macbook Air mid 2012)

Hello,
I read some famous instructions, but they are not for Macbook air mid 2012 as there are some missing options in their Bootcamp Assistant and this on macbook air 2012.
Btw, they suggested some rEFIt program which supports installing windows from usb which is made in 2010 but it has not been updated since then. I tried it but it doesn't work like it is described in instructions.
I have my USB and Windows 7 on it, but i don't know how to install it on the Macbook Air 2012.
Any help will be appreciated.
Kind Regards,

Hello,
Thank you for the explanation that helped me to understand Windows 7 installation process!
Unfortunately i need more additional information as Boot Camp Installation & Setup Guide is very poor with information that i need.
To explain you better what i mean on, i will quote Boot Camp Guide parts with underlined sentences that have been confusing me. Some sentences that have been confusing me more than other ones will be additionally bolded. I will explain you why i don't understand it after every part.
1. "Introduction"
"You can install Windows with an installation disc you provide or, on some Mac computers, with a USB flash drive that contains a Windows ISO images downloaded from Microsoft. Boot Camp Assistant helps you burn the image to the flash drive."
-But i already have my iso image on the USB flash drive. There is no need to be burned again?
2."What you need"
"Boot Camp Assistant erases the flash drive, and copies to it the Windows 7 ISO image and software drivers that let Windows work with your Mac hardware."
-Erasing the flash drive? Does it mean that it will delete my WIndows 7 which is already on my flash drive?
-Copying Windows 7 ISO image and software drivers to my flash drive? Why? I already have Windows on my flash drive! Software drivers? How do i get them and where shall i place them?
3."Prepare your mac for Windows"
"If you want to install Windows from a USB flash drive and you have a Windows 7 ISO image, select option to copy the image to a USB flash drive."
Why shall i select the option to copy Windows 7 ISO image?
1.I already have it on my flash drive.
2. I don't have it on my Macbook so there is no place in a ssd where Boot Camp will find Windows 7 ISO image.
Here is the overview:
Guide is telling me to select the option to copy image to a USB drive which will first erase my USB flash drive and then copy Windows 7 and it's software drivers to my USB flash.
-But only thing that i need is Windows support software and i don't know whether to download it to desktop, or to USB flash drive.
Kind Regards,

How do I install windows and bootcamp on my macbook Air

Similar Messages

Maybe you are looking for